How to find datasources in in r/3 for HR fileds
Hi BW guru's
i want extract data from these fields from r/3 to bw .
ARBST
WOSTD
WKWDY
i find teese are in PA0007 table , but i dont know which standard datasources supports for these fields.
how to find the exact datasource for thes fields ?
it is very argunt...
waiting for fast reply..
i will assign more points for fast reply
Thank u
PSR
Hi,
I had a scenario where I was required to bring in fields WOSTD, WKWDY in BW but that doesnt come thru standard datasource. So I had enhanced datasource 0HR_PA_0 and had added these fields to it. You would be required to write user exit code in RSAP0001 to populate those fields. Its little tricky as data is time dependent and records comes in different date ranges.
Abhijit
Similar Messages
-
How to find datasource for cube 0BCS_C11
Now we plan to do BCS. We want to create a cube ZBCS_C11 to copy real-time cube 0BCS_C11, the question is how to find datasource? Is there any standard datasource? Pls info, thanks!
hi,
For reporting purposes, you can use the virtual InfoCube 0BCS_VC11 u2013 Consolidation (Company/Consolidation Profit Center). It shares the same structure as InfoCube 0BCS_C11.
go through this link.
http://help.sap.com/saphelp_nw70/helpdata/EN/05/fdce0e59a82b4da957ead6e8022233/frameset.htm
regards
vadlamudi -
How to find out relevant Infosources and Infocubes for Datasources (LO)
Hi Gems,
I am new to BW.
How to find out relevant Infosources and Infocubes for Datasources for LO Cockpit
any help site pls.
Thanks in advance1. make sure that your datasources have activated (trans RSA5 in SAP Source System) from the SAP Source system (Ex: R/3 or SCM System)
2. after that you have to run trans RSA9 in SAP Source System to transfer new datasource in to BI System.
3. log-on into BI System, run trans RSA1, choose SourceSystem Tab in the left panel. Right click on to your SAP Source System then choose <b>Replicate</b>.
4. in the left panel choose BI Content tab, select infoObjects by infoArea.
5. then Click on Grouping, select in <b>Dataflow Before and afterward</b>. Click Collection Mode, select Collect Automatically.
6.in the middle panel, expand "Supply Chain Management" infoArea, select both <b>Characteristics: Logistics General</b> and <b>Key Figures: Logistics General</b>. Right click on it and select <b>Insert Objects for Collections</b>.
7. After the objects have been inserted into Collected Objects then choose install with option Install in Background.
8. Wait for the result.
<b>Pls give point if you see its helpful.</b>
Regards,
Chuong Hoang -
How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?
Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya -
How to find the number of references created for a given object ??
How to find the number of references created for a given object in a big application environment.
That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??Please do not post the same question multiple times.
As for your original question, there is no direct way to do it.
Especially not the way you phrased it,
since objects don't have "names".
Applications also don't have "names".
They have classes and instances.
Also, there are 2 related issues, and I'm not sure which one is the one you asked.
#1. Finding the number of references to the same object.
Eg.
Map<String,String> a = new HashMap<String,String>();
Map<String,String> b = new HashMap<String,String>();
Map<String,String> c = a;In this case, there are only 2 objects.
The first object has (at least) 2 references pointing to it.
The second object has (at least) 1 reference pointing to it.
(There may be more, if the HashMap library keeps
references to these things, or if the HashMap object has
some internal cyclic references...)
If you're asking this, then it can't be done.
It's an active research topic in universities
and software research labs, called "alias analysis".
Type it in google, and you'll see people are working hard
and having little success so far.
#2. Finding the number of instances created from a class.
In this case, what you have to do is to add a counter to
the constructor of the class. Every time an object is constructed,
you increment the counter. Like this:
class MyClass
public static int counter = 0;
public MyClass( ) { counter++; }
// Then later in your program, you can do this:
MyClass a = new MyClass();
MyClass b = new MyClass();
System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
For every class you care about, you have to modify its constructor.
Also: when an object is deleted, you won't always know it
(and thus you won't always be able to decrement the counter).
Finalizers cannot always work (read Joshua Bloch's
"Effective Java" book if you don't believe me), but basically
(1) finalizers will not always be called, and
(2) finalizers can sometimes cause objects to not be deleted,
and thus the JVM will run out of memory and crash -
How to find out the Number range object for Incident number
How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanyaHI, an example.
data: vl_num type i,
vl_char(6) type c,
vl_qty type INRI-QUANTITY,
vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
NR_RANGE_NR = '01'
OBJECT = 'ZRG0000001'
QUANTITY = '1'
SUBOBJECT = ' '
TOYEAR = '0000'
IGNORE_BUFFER = ' '
IMPORTING
NUMBER = vl_num
QUANTITY = vl_qty
RETURNCODE = vl_rc
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
BUFFER_OVERFLOW = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard -
How to find the count of tables going for fts(full table scan in oracle 10g
HI
how to find the count of tables going for fts(full table scan) in oracle 10g
regardsHi,
Why do you want to 'find' those tables?
Do you want to 'avoid FTS' on those tables?
You provide little information here. (Perhaps you just migrated from 9i and having problems with certain queries now?)
FTS is sometimes the fastest way to retrieve data, and sometimes an index scan is.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:9422487749968
There's no 'FTS view' available, if you want to know what happens on your DB you need, like Anand already said, to trace sessions that 'worry you'. -
How to find out the Idoc number triggered for any material transfer frm SAP
Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish -
How to find the incremental growth of index for last few months
Hi,
How to find the incremental growth of index for last few months.
Thanks,
Sathis.Hi,
Check the below link, it may help you!
http://www.rampant-books.com/t_tracking_oracle_database_tables_growth.htm
Thanks,
Sankar -
How to find out the last time login for a locked login account?
In ASE 15.4,there are many login account show as locked and unlocked. How to find out the last login time for those locked login account?
Thank you. The version of my ASE is 12.5.4.
This is what I got from select * from syslogins:
suid status accdate totcpu totio spacelimit timelimit resultlimit dbname name password language pwdate audflags fullname srvname logincount procid
1
30 2 10/25/2012 11:41:10.430 AM 0 0 0 0 0 . . ... us_english 02/24/2.0.08 12:55:38.640 PM 0 [NULL] [NULL] [NULL] [NULL]
this is what I got from exec sp_displaylogin 'mylogin':
1 Suid: 46
2 Loginame: mylogin
3 Fullname: FN LN
4 Default Database: mydb
5 Default Language: us_english
6 Auto Login Script:
7 Configured Authorization:
8 Locked: YES
9 Date of Last Password Change: Apr 17 2010 2:36PM
10 Password expiration interval: 0
11 Password expired: NO
12 Minimum password length: 6
13 Maximum failed logins: 0
14 Current failed login attempts:
15 Authenticate with: AUTH_DEFAULT
which one is for last login time? -
How to find the WebUrl alert was raised for external network
I have two weburl's requestes to monitor under SCOM2007 R2
url one: https://www.asdftest.com
url two: https://www.lkjhtest.com
"url one" is configured to access the weburl from internal network and external network(internet) as well.
"url two" is not configured to access from external network(internet). only configured for for internal network.
I have configured for scom monitoring for the above two urls using the SCOM 2007 R2 web application template. After configuration i have not received any alert from the "Url Two"
Q1). I am expecting an alert for "Url two" because it is not configured for external network access.
why i was not received any alert for that.
Q2). How to find an web Url alert is raised for internal network or external network. SCOM Tool is not asked me to specify that the weburl is is from internal/external network access.
Q3). Particularly how to find the Url alert was raised for external network
please suggest me and correct me if i am wrong.
Thanks in advance.Hi,
Please refer to your another thread:
http://social.technet.microsoft.com/Forums/en-US/10d32ff3-d1a5-4875-b1ad-bb01a5799a33/web-url-monitoring-internalexternal-network?forum=operationsmana
Regards,
Yan Li
Regards, Yan Li -
How to find block free space and PCTUSED FOR THE TABLE
HI all,
Due to performance issues for my database , my management ask me to reset the PCTUSED and PCTFREE values , and my doubt is
1)How to find the current PCTUSED and PCTFREE values.
2)How to find block free space and PCTUSED FOR THE TABLE.
Please help me out regarding this.
Regards,
Vamsi.1)version is 10.2.0.4
2)output of query
tablespace extent_management allocation_type segment_space_management
SYSTEM LOCAL SYSTEM MANUAL
UNDOTBS1 LOCAL SYSTEM MANUAL
SYSAUX LOCAL SYSTEM AUTO
TEMP LOCAL UNIFORM MANUAL
USERS LOCAL SYSTEM AUTO
UNDOTBS2 LOCAL SYSTEM MANUAL
INS LOCAL SYSTEM AUTO
CONFTBS LOCAL SYSTEM AUTO
REINS LOCAL SYSTEM AUTO
ANALYST LOCAL SYSTEM AUTO
BI LOCAL SYSTEM AUTO
INTRFC LOCAL SYSTEM AUTO
COGNOS LOCAL SYSTEM AUTO
TS_INDX LOCAL SYSTEM AUTO
TS_CHOLAWEB LOCAL SYSTEM AUTO
TS_DASBOARD LOCAL SYSTEM AUTO -
How to find the customer ledger account display for profit centerwise
Dear All,
how to find the customer ledger account display for profit centerwise
Pleas give your valuable suggestion
Regards
Vishwajeet SharmaHi
check the tables
A959
A962
A997
The assignment depends on so many things
with respect to which transaction you wants the PRCTR field for KUNNR?
Regards
Anji -
How to find gr details and invoice status for particular list of purchase
Hi,
how to find gr details and invoice status for particular list of purchase orders.
is there any t.code/report for it??Hi,
You use t.code:ME2Nand enter PO number,tn Execute.Now you will have PO details .Now in item details get GR details and Invoice details in purchase order history TAB.
In t.code:MIR5, you can see blocked invoice by selection.
Regards,
Biju K -
How to find the TCODE that is created for the table maintanance generator
Hi ,
How to find the TCODE that is created for the table maintanance generator of particular table,if we only know the table name.
Regards
Ramakrishna LHello,
I try it this way
1. Goto SE16 --> enter table TSTCP.
2. In the selection-screen displayed, enter
PARAM = *<ZTABNAME>*
You will get the t-code for the TMG.
BR,
Suhas
PS: Are you sure a t-code has been created for this TMG ?
Maybe you are looking for
-
I update to the latest version of firefox and now I am having this problem. It was ok before.
-
How can I delete all of my calendars and start over from scratch?
I am sure this is an easy question because it seems that others before me have probably been in this situation. I wish to delete my calendars (and todo lists, etc) in iCal. In essence I want to start over from scratch as if I had not yet used iCal. D
-
What's happened to the download button?
Why not just leave it in the Toolbar, Apple? Can't customise it in 10.7.2 as there is no longer a button that can be added to the Toolbar.
-
I can't seem to get a clear answer on this. I want to know if the new graphics cards on the 2013 iMac support CUDA. There are two options: NVIDIA GeForce GTX 775M NVIDIA GeForce GTX 780M Neither are listed on the Premiere Pro Tech Specs Page: Adobe P
-
Problem running the OdpNetWs sample
Hi, I have the following error when starting the OdpNetWebService sample (I must say that I work with Oracle8i DataBase instead of 9i, in case this would be the trouble...) Thank you very much in advance for your help Bert Server Error in '/OdpNetWs/