How to find Delta Field for 0MATERIAL?

Hi,
In general when we create Generic Data Sources with Delta Updating we give a Delta specific field name,like that how to find which is the field that is used for 0MATERIAL OR 0MAT_SALES,i am not able to find this information using RSA7 transaction.Suggestions to this would be helpful.
Thanks in advance.
Monica.

Hi Monica,
You can find the field that tracks the changes to the master data lets say some time stamp or changed date..etc.
Thanks,
Krish

Similar Messages

How can I know the delta field for CO-PA datasource?

Hi,folks:
How can I know which is the field assigned as the delta field for CO-PA datasource,as is noticed in the note that after PI2004 the logic has been turned to general datasource,but I can't find the datasource through RSO2.
Full points will be given to u.
Martin Xie

Dear Martin,
The CO-PA DataSources generated use a separate time stamp method for the delta procedure. This procedure means that client-independent DataSources in CO-PA are normally restricted to the clients in which they were generated.
See this link...
http://help.sap.com/saphelp_erp2005vp/helpdata/en/97/6f4d40cef71059e10000000a155106/frameset.htm
Also check ROOSOURCE in R3, asmentioned by Dinesh.
Hope it helps.

How can i find out field for a particular component type

hi,
how can i find out for particular component name is belongs to this field.....that means REF_DOC_NO componemt is belongs to xblnr field ..../.if we know only component type ...how to find the field...
plz tell me
thanks&regards,
kalyan

keep the cursor on component
press F1
select technical information
you will find the field name and table or structure name
regards
sateesh

HOw to find the text for PERSK field in infotype 0001

hi all
HOw to find the text for PERSK field in infotype 0001

Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan

How can i find the fields for &DOPOS_CPY-WRBT1(I13.0)&

Hi All,
In sapscripts, what is the meaning for (13.0)?
how can i find the fields for &DOPOS_CPY-WRBT1(I13.0)&?
Thanks.

meaning for (13.0) is write to form this variable's 13 character non decimal and 0 character decimal places.
shortly not write decimal places.
DOPOS_CPY-WRBT1 is exist in form caller program. check in abap program not in sapscript.
take care
Çağatay

How to find the Ranges for a field ?

Hello All,
 Can anyone tell me how to find the ranges for a field.
1, i.e say I want the Ranges Structure for the field LIFNR.
 The ranges structure for this is "RANGE_LIFNR".
 This I used in my Program since I know it previously.
 But now I want the ranges structure for the field VBELN (Delivery Document).
 I don't know what is it !!!!!
2, Is there any procedure to know the ranges structure for a particular field ?
Regards,
Deepu.K

Hi Deepu,
Using 'Where used list' you can able to find out RANGES tables.
For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
If you using a program defined as shown below.
DATA: r_vbeln type ranges of vbeln.
The above statement also creates ranges structure in Runtime.
Procedure finding range table structures
go to SE37 -> Enter domain or dataelement value
Go to where used list --> search for 'Structures'
After getting all structure --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
You can get all ranges tables in the search window
If helps plz reward points.
Regards
Bhupal Reddy

How to Identify Delta Field in DS

Hi Gurus,
1. My understanding is if a field in datasource(DS) is
set as Delta, whenever that field value changes in DS
then the delta process will initialize. (please correct
me if i am wrong) Do we need to replicate everytime
the field value is changed so that the value is updated
in the data target, if so is there a process to
automate it...
2. Can someone tell me how to identify Delta Field in a
DS for example in 0FI_AP_4. i tried to search for it in
help.sap.com but all i could find is that 0FI_AP_4 is
delta capable but couldn't find which field is set to
delta...
Thanks,
SM

Sri Mal,
   1. Yes, there should be one field enabled enabled for delta.
   2. no need to replicate every time when ever data changes. we need to replicate when DS changed. i mean not business data, if meta data changes we need to replicate the DS. let us assume you made one field for selection and one field as hide. then you need to replicate this.
3. OFI_AP_4 is standard DS. you can't enable delta for this one if SAP didn't provide that. we need to active data for this. in the SAP Documentation you can see whether it is delta capable or not.
comming to 0FI_AP_4, IT IS DELTA CAPLABLE.
Hope this helps.
All the best.
Regards,
Nagesh Ganisetti.

Delta field for Data Source 0BP_RELATIONS_ATTR

Hi Experts,
I need to know how to find which field is Delta enabled for standard Data Sources.
In my requrement for Data Source 0BP_RELATIONS_ATTR.
As the Data Source is being accessed by BODS sysetm and they need to know the Delta field to extract delta.
Thanks
Basheer

Hello,
Are you using Crystal Reports? If not I believe you should be posting your question to one of the Classic SAP forums:
http://forums.sdn.sap.com/index.jspa#45
Please mark as answered also.
Thank you
Don

Delta field for LO Extractor Datasources

Hi All,
Can anyone tell me how to find the delta field for LO Extractor. Because currently i am facing some problem in Delta like, if i do any changes in sales order in Item Level those changes are not reflected in RSA7. And the next change if i do it in header level i cld see the change along with my previos change being displayed. Problem is i dont find as seperate record for my changes in ITEM level.
Ex. x 3040404 001 oooo ppppp oooo hhhh kkkk
3040404 001 oooo bbbbb oooo hhhh kkkk - this is for header level chnage
Item level chnage: Not shown as seperate records
Next header change displayed properly as above.
Pls advise me this is a very urgent issue.
Thanks.
Bhu.

Hi Nagesh,
Thanks for your reply.
Onething to tell is i am handling diff clients. All my clients r using 3.5 except this client. Very Unfortunate. They r using 2.1c. Its long back i used this version
In LBWE i found they have only one update type i.e V3 update.
I have checked SM13 also. There is one update records for each change in header level data. Also this time i found when i change Route i found one update record. But not when i change Schedule line date.
Pls let me know if u need any further info. Anyideas welcome.
Cheers!
Bhuvana.

How to find Info objects for particular filed??

Hi
I hav doubt Can anyone tel me???
My Query s How to find Info objects for particular filed??
For example i hav some table fileds, how to find Info objects for that fields??
Pls explain me detaily
Points wil be given for all answers.
Thanks
Senthil

Hi Senthil ,
You have your field description along with your Field right.
For example:MATNR - Material Number
Now take this description and go to your BW side Tcode:RSA1
1)Search in Modelling >> Infoobjects >> Material Number
Then you get few hits (matches) which have description matched.
For Example: 0material - Material Number
Check for the Length and type match.
You will understand once you get those hits as to which is related to yours.
2)Go to BI content and search in the infoobjects this has all active and inactive objects but this takes a little time (not much though).
3) You have meta data search / simple search also where you can search for the objects with field description as matching criteria.
Hope your doubt is cleared atleast to some extent.
Assign Points if helpful.
Thanks,
Priyanka

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

How to check delta field in EDIDS table

Hi,
I have to create generic delta based on EDIDS (Status record) table. Since there is lot of data so i have to set delta point for this data-sources.
Could you please help to find delta field in this table?
Thanks & Regards
Devesh babu

Seems like there is no other fields which an be relevant delta.
check docnum is possible to use as numeric pointer.
Numeric pointer can be used when table allows for entering new records only.
if there is no delta relevant field, go with full load every time.
Use dso inyour data flow. so that we can introduce delta between dso to cube.
data flow like this
data source---> Every time full load to PSA--->You use delta or full load. it pulls latest request which is full to dso---> dso to cube, load delta dtp.
Need to delete the psa request before every load.
thanks

How to find table & fields of standard InfoObject?

Hi
How to find table & fields of standard InfoObject for creating generic DataSource?
e.g. I want to know the table & field of 0MAINTPOS infoObject.

You can get the list of tables involved in a particular DS by using the below method ( this another approach)
--> RSA3 -- enter your DS ( execute later)
--> Goto Tcode ST05 --> switch on the SQL Trace
--> now execute the extract checker in RSA3.once done switch off(deactivate) the SQL trace.
--> in st05 screen you can find the button "Display Trace" -- execute (here make sure SQL trace button is enabled.
--> from the menu bar -->Trace list--> select "combined table accesses".
--> it will display the tables involved in it -- check for TABLE names section.... select that row Table names -- click on filter button --press F4 -- here we go it will display the list of entire tables involved in the extraction activity... here you need to sort the tables which are related to your DS.

How to find system status for production orders?

How to find system status for production orders?
looked into table AUFK, AFKO and AFVC but none of these tables, carry
system status as part of the fields(STTXT)
I tried to filter in COOIS, but not much help
Able to find system status information in COHV,Is there any other way where
I can find system status information for production orders
Kindly guide

Hi,
Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
But, it is very difficult to combine the details like Order and System status.
Take the help of your ABAPer to generate Report for you.
Regards,
Siva

How to find condition type for a particular material document no.

hiiiiii
How to find condition type for a particular material document no.

Hi
Condition types are maintained at PO level
Take the EKKO-KNUMV and pass to
KONV-KNUMV field and take the different condition types values from KONV
Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
see the table T685 for different condition types.
Reward points for useful Answers
Regards
Anji

How to find Delta Field for 0MATERIAL?

Similar Messages

Maybe you are looking for