How to find documentation that has moved?

Is there any way to find out where Apple documentation has gone?
I used to point others to http://support.apple.com/kb/TS1628 when trying to help in the .Mac Forums (.Mac: Troubleshooting syncing issues or issues in the .Mac preferences Sync or Advanced pane) but this article is no longer there.
I've tried using the search option to find out what has replaced it but no luck so far.
I'm not sure if it disappeared when the transition from .Mac to MobileMe happened.
Regards,
Colin R.

Colin Robinson wrote:
Hi romad,
I've been bookmarking them and checking them before posting links to them. That one has disappeared completely so I was trying to find its replacement - the thought being that if it has gone then it must have been pulled for a good reason, hence no need to keep a copy on my machine.
True, but it might still have had useful info. You could then use c&p to insert the text, but with a disclaimer that some info might be outdated. Remember that Apple's reason may be "good" for them but not for their customers.

Similar Messages

  • How to Find request that has to do Reverse posting after compression

    1. one record in cube got doubled Example V = 10 but it is displaying V = 20 and my cube got compressed and I donu2019t know which request that has to do Reconstruct . I donu2019t want to do full load or selective deletion and again reload that data .  Please suggest better Options I can approach ?
    2. I have don one enhancement for data source 2LIS_ 13_VAHDR  in Dev & Quality  and successfully working fine . Before moving to production what are basic steps need to taken care without disturbing existing business . what is the sequence of transport request ?
    3. How delta work in generic extraction using time stamp , Numeric , Date  when compared to logistics.?
    Thanks,
    Mahendra.

    Hi jigg,
    Thanks for the info.
    In my sequence file, besides the main sequence, I also enabled "SequenceFileLoad" callback. In "SequenceFileLoad" sequence, I added some instruments initialization tests. The goal is to initialize the instruments only once when the sequence file is loaded. Therefore I need to know when the "SequenceFileLoad" is finished or when the sequence file has finished loading.
    My first idea is to use the event "axApplicationMgr_SequenceFileOpened", but I found that I will catch this event before the "SequenceFileLoad" execution finished.
    And then, I also found that together with the execution of sequence "SequenceFileLoad", there are 2 events in my C# code: "axApplicationMgr_StartExecution" and "axApplicationMgr_EndExecution" triggered. So I was thinking may be I can use "axApplicationMgr_EndExecution" to determine if the sequence file has finished loading. But the problem is every sequence execution will trigger these 2 events. The main sequence will also trigger these 2 events. So I needs to know the name/ID of the current executing sequence.
    So Is there a way to read current executing sequence name?
    Thanks and regards,
    0049

  • How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is "unable to find the original file?" I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

    How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is “unable to find the original file?” I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

    Backup drive?
    Subscribe to iTunes Match?
    If neither of the above and you don't have the CD and can't find your tracks on the computer then they you're stuck.  A file recovery utility will cost $100, plus another $100 for an external drive to which to resue the files, and may not even work.  You can buy a lot of CDs for $200.

  • How to find out who has deleted the production Query

    Hi All,
    I have searche SD , i can find it for infoobject deletion but i couldn't find it for Query.
    Please let me know is there any possiblity to kow
        How to find out who has deleted the production Query
    Awaiting for your replies.
    cheers

    Hi Mahesh and all,
    Thanks for all your  inputs.
    I have tried with RSRREPDIR tabel , I am unable to see that query at all.
    If I use theT-code SLG1,
      please guide me on the steps with paramets to be given in the respective ..object, subobject etc..
    OR
    could you please suggest any other way.
    cheers
    leena

  • How to find out that particular structure is used in which tables

    Hello Friends,
    Most of the times through techinal information we come to know the table name for a particular field.And in se16 when i give that table name than system says its structure and not the table.So in se11 when i give that structure name in database table field, its shows all the field in that structure, but not the data stored in that field.
    So my question is how to find out that particular structure is used in which tables,so that i can view data stored in that structure?
    Thanking you guys in advance.
    Regards,
    Jitendra

    Dear,
    When you click on the technical information it will give the structure name and field, double click on the structure and it will take you the display structure screen, there you will have the where-used List icon (Ctrl + Shift + F3) at the top , click on that and it will show the options, select Database tables and execute, it will give the tables related to the structure, you can explore the list of tables and find where your required field is stored in them.
    Thanks & Regards,
    Vijaya Bhaskar A

  • How to find out who has released the purchase order?

    Hi All,
    I have a PR number lets say 10231322 and somebody has release it. Could any one please tell me how to find out who has release it?
    Waiting for your kind replies......
    Thanks in advance.
    Regards,
    Faisal

    Hi,
    When you are in tr ME23N, use the menu: environment > header changes.
    Rgds,
    Suzy

  • How to find out what has been restored to a database instance?

    I'm using RMAN to back up and restore/recover. How to find out what has been restored/recovered to a database instance?
    Oracle version is 11gR2 but compatibility is set to 10.
    Edited by: 881656 on Aug 28, 2012 1:54 AM

    select output
    from V$rman_output
    order by stamp;
    select *
    from V$rman_status
    order by start_time desc;
    Regards
    Asif Kabir
    Handle:      881656
    Status Level:      Newbie
    Registered:      Aug 25, 2011
    Total Posts:      52
    Total Questions:      *30 (30 unresolved)*
    -- please close all the answered threads and mark your helpful post as correct/helpful

  • How to find geometry that have intersection with polyline?

    Hello,
    How to find geometry that have intersiction with polyline?
    I hava a lot of polygon, i want to find wich of polygon have intersection with polyline.
    What shall i do to find out this?
    Regatd,
    Thank's

    is that correct when i use such query?
    SELECT
    FROM aaa c
    WHERE SDO_RELATE(c.geometry,
    SDO_GEOMETRY(2002, 1, NULL,
    SDO_ELEM_INFO_ARRAY(1,2,1),
    SDO_ORDINATE_ARRAY(0,0,12,12,25,25)),
    'mask=anyinteract') = 'TRUE'
    Thanks

  • Where can I find documentation that explains how

    I would appreciate it very much if somebody could tell me
    where can I find a documentation that explains how is it possible to customize the <jbo:ShowHint, similar to the way custom renderers customize <jbo:RenderValue...?
    Thx

    A try at google with sufficient keywords often reveals the answer.
    My estimate is 60-80% of the questions posted here can be solved by constructing a good google search, and take some time to read the hits.
    Of course experience with using linux helps (to choose the rights search keywords)
    To the original poster: there is a very valuable command called 'man', which means 'manual'. if you need information about commands, use the manual, for example: man lsto learn about the 'ls' (list) command. also try man manthe manual page about the manual pages command.

  • How to find out that sequence has finished loading?

    Hello,
    i have a custom C#-OPUI to load and execute testplans.
    I do this using these funtions:
    1. ApplicationManager.OpenSequencFile(filename)
    2. ???
    3.Command TestStart = axSequenceFileViewMgr.GetCommand(.......)
    TestStart.Execute(true)
    The question is now: How do i know that the OpenSequenceFile has finished doing everything?
    I need to know that is finished before i run the execute-command.
    Is there a specail final-event that i can check?
    Thanks for help
    Solved!
    Go to Solution.

    Hi jigg,
    Thanks for the info.
    In my sequence file, besides the main sequence, I also enabled "SequenceFileLoad" callback. In "SequenceFileLoad" sequence, I added some instruments initialization tests. The goal is to initialize the instruments only once when the sequence file is loaded. Therefore I need to know when the "SequenceFileLoad" is finished or when the sequence file has finished loading.
    My first idea is to use the event "axApplicationMgr_SequenceFileOpened", but I found that I will catch this event before the "SequenceFileLoad" execution finished.
    And then, I also found that together with the execution of sequence "SequenceFileLoad", there are 2 events in my C# code: "axApplicationMgr_StartExecution" and "axApplicationMgr_EndExecution" triggered. So I was thinking may be I can use "axApplicationMgr_EndExecution" to determine if the sequence file has finished loading. But the problem is every sequence execution will trigger these 2 events. The main sequence will also trigger these 2 events. So I needs to know the name/ID of the current executing sequence.
    So Is there a way to read current executing sequence name?
    Thanks and regards,
    0049

  • HT4061 MY ipad has been stolen and i am looking for serial number for insurance purposes can someone explain how to finf the serial number by looking within Itunes and finding hardware that has been used with my itunes account

    any help finding my ipad serial number please
    Thanks

    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
     Cheers, Tom

  • System log - how to find out who has deleted the req from cube.

    ^hello friends
    how can i find out who has deleted the request from cube ?
    i wanted to check the system log , that who has deleted the request from cube .
    could you please let me know how to check the same ?
    regards
    manoj

    Hi,
    Did you try the method I had suggested. It will work.
    Also its better to try the path I had suggested as it will display the logs for that particular Cube only.
    But if go through SM37 > B_DEL* it will display all the logs for all the deletion jobs not just this cube and it will be difficult to find out.
    Try that and you should get the log.
    Thanks,
    JituK

  • How to find out that the card in a given NIDAQ slot is a DSA card?

    In the description of DAQ_Op(...) function in the traditional NIDAQ function reference one reads:
    "buffer" is an integer array. "buffer" has a length equal to or greater than count.
    When DAQ_Op returns with an error number equal to zero, buffer contains the acquired data.
    For DSA devices, buffer should be an array of i32. These devices return the data
    in a 32-bit format in which the data bits are in the most significant bits.
    Question 1: How to find out programmatically that the card in a given NIDAQ slot is a DSA card?
    Question 2: How many MSB carry the information? How do I find out bit-ness of the card (programmatically)?
    The obvious solution to create and keep updated the table/fil
    e with the data for all existing DAQ cards is unacceptable. This could be maintained by NI itself, but not by 3rd party developpers, like me.

    Bryan, thanks for your answer.
    I hope that my NIDAQ-wish-list will not only reach NIDAQ developers but some of it will be implemented in the next versions of NIDAQ.
    I should say that I am quite pessimistic because I was sending similar requests via German support few YEARS ago and I am still even do not know whether they reached developers or not. Even if yes, the present NIDAQ still does not have these functions and this means that NI takes 2..4 years to react on the feedback.
    At the moment I have no choice, and I do maintain self-made info file (nidaq.ini). But beleive me, it is a pain in the @ss to scan help files and manuals of the DAQ cards which I've never seen just to include info in nidaq.ini. And when my customers of a brand new NIDAQ ca
    rd call and wonder why the card is not reacognized by my application correctly, I tell to them that this is basically fault of NI. Because NI provides no way to get card info. I am doing my best analysing error codes, but it does not help in all cases. Sorry, guys, but you left no choice to me.
    As for NIDAQmx, this is not a solution either. I am not going to rewrite my existing and working rather big application. It could be a good suggestion for those who just starts developing a new applications from the scratch, but not for those who almost finished it. Even for those who begin now, NIDAQmx may not be a good choice, because, as I saw in this forum, it does not support all cards that are supported by NIDAQ. It also looks like that instead of improoving, developing and fixing NIDAQ, NI dicided to change API completely. It is not yet clear to me whether NIDAQmx is supposed to substitute NIDAQ in the future or not. If not, I would concentrate on improoving trad. NIDAQ. If yes, it wou
    ld be a disaster for many developers. :-(
    Anyway, I hope that the interaction between NIDAQ team and application developpers will be improoved, and we will see some results of this feedback.

  • How to find out who has release the purchase requisition?

    Hi,
    I have a Purchase Requisition Number with me and I want to know who has released it. Can any body please help me how to find this?
    Waiting for your valuable responses! Thanks in advance.
    Regards
    Faisal

    Hi,
    Thanks for your response. However, is there not any tcode by which we can find it out?
    By the way I have done the following to find it. Kindly confirm if I have done it correctly:
    1. Executed tcode me23n
    2. Menu Purchase Requisition->Other requisition
    3. Specified the PR number.
    4.Menu Environment -> Item Changes
    5. Here in this screen, I got some information saying :
           Person responsible (user id), Date, Time, Transaction, Change Doc etc..
    Here it says that, one user executed tcode me54 and release indicator is changed to 3.
    I think this is only the user who has released it.
    Anyway, kindly confirm the same.
    Regards,
    Faisal

  • [JS, CS3] How to find text that is NOT a paragraph return

    Hi all,
    This is probably an easy one, but I can't seem to get the idea. I want to search within some text and find everything EXCEPT the paragraph return. What would be the way to build that expression? Thanks for any response.
    Regards,
    Len Swierski

    Thanks, Peter!
    I appreciate your help but I have found another solution. I am amazed at my own stupidity sometimes. You see, I do my scripting in a very lame sort of way because I have never used Javascript outside of InDesign. As such, I find myself at a disadvantage because the documentation that Adobe provides assumes that you are aware of many of the basics. Case in point: I have always had trouble manipulating strings because I NEVER KNEW that you could search and replace strings! I just could not find examples of this in the Adobe documentation. So here I was in some cases adding temporary textFrames so I could get to my strings as text contents and then removing the temporary textFrames at the end of the script. In this particular case I needed to merge several paragraphs into one paragraph. Now that I know how to search & replace strings, it is so simple to strip away all the paragraph returns (which are included in text contents). I am learning, albeit rather slowly. Thanks again.
    Regards,
    Len Swierski

Maybe you are looking for