How to find driver/install driver for AIO 924 printer

My printer is being recognized but says driver unavailable...what can I do?

Hi tmad,
Welcome to the HP Forums!
I see that you are trying to find a driver for your printer, and I am happy to help!
For further assistance, I will need to know the following information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.  
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • On my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    on my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    Click on the Desktop. From the Finder menu select Preferences. Check the boxes for what you want on your Desktop. If they are already checked, then try unchecking and rechecking.

  • Need to know Driver Install Sequence for T500

    Please let me know the correct driver install sequence for T500.

    Check out the following forum posts, they contain very detailed instructions how to clean install your ThinkPad.
    http://forum.notebookreview.com/showthread.php?t=144783
    or
    http://forum.notebookreview.com/showthread.php?t=294974&highlight=t400+install
    This second is for the T400, but it works for the T500 as well. At least I followed that one on how to enable switachable graphics with the T500.
    Hope this helps! 

  • I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

    I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

    cr is installed by updating your app.  use help>update, or update manually
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

  • How to find and install right java for ECC6 intstallation on AIX5.3

    Hello
    I wander how to find and install right java for ECC6 intstallation on AIX5.3. I went thruroughly thru note 723909 and underlying 716927, 1008311 and 1039948 notes but I still do not understand.
    I guess I should logon to IBM site http://www.ibm.com/developerworks/java/jdk/aix/service.html
    where I can choose :
    " Java 1.4.2 64-bit "
    and then :
    "64-bit SDK 1.4.2 base images (at 1.4.2.0 level; in installp format) "->"Base SDK (required)
    Java14_64.sdk.tar  ((50001920)
    then I assume (on AIX ) I should "tar xvf Java14_64.sdk.tar".
    then I get extracted "Java14_64.sdk"
    Is this ok?
    I know on Linux(
    from IBM site I downloaded "IBMJava2-amd64-142.rpm"
    then I issued
    "rpm -i IBMJava2-amd64-142.rpm "
    and finally issued
    "export JAVA_HOME=/opt/IBMJava2-amd64-142")
    What in case of AIX5.3? Could you help me?

    I was told to use smitty (just I am not familiar with it). furdermore i do not hace read.me file. the ziped files are:
    Java14_64.ext
    -rw-rr 1  202 bin    371712 Mar  2  2010 Java14_64.license
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.ja_JP
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.Ja_JP
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.ko_KR
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.zh_CN
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.Zh_CN
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.zh_TW
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.Zh_TW
    -rw-rr 1  202 bin   4888576 Mar  2  2010 Java14_64.samples
    -rw-r----- 1 root root 67190784 Oct  4 09:53 Java14_64.sdk
    -rw-rr 1 root root 77370639 Nov 20 19:36 Java14_64.sdk.tar.gz
    -rw-r----- 1 root root 12612608 Oct  4 09:53 Java14_64.source

  • How to find next number range for project definition in tcode CJ20N

    Hai Experts,
          Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
    Note: I searched in forum before posting, but couldn't find the solution.
    Thanks
    Regards,
    Prabu S.

    Hi,
    For project defination internal number is assigned by system.
    When you saves's project then system allocate one number to project defination, you can view it,
    SE11 >>> table  PROJ >> Click on contents >>> execute,
    here you will get your project defination & number is assigned to project defination.
    kapil

  • How to find classtype and class for a material.

    Hi,
    How to find classtype and class for a material.
    which table contains this data.
    Thanks
    Kiran

    Hi Kiran,
    Check below sample code. Use this BAPI which will give all info about the class for the material.
      DATA:      l_objectkey_imp    TYPE bapi1003_key-object
                                         VALUE IS INITIAL.
      CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
                                         VALUE 'MARA',
                 lc_classtype_imp   TYPE bapi1003_key-classtype
                                         VALUE '001',
                 lc_freight_class   TYPE bapi1003_alloc_list-classnum
                                         VALUE 'FREIGHT_CLASS',
                 lc_e               TYPE bapiret2-type VALUE 'E',
                 lc_p(1)            TYPE c             VALUE 'P',
                 lc_m(1)            TYPE c             VALUE 'M'.
      SORT i_deliverydata BY vbeln posnr matnr.
      CLEAR wa_deliverydata.
      LOOP AT i_deliverydata INTO wa_deliverydata.
        REFRESH: i_alloclist[],
                 i_return[].
        CLEAR:   l_objectkey_imp.
        l_objectkey_imp = wa_deliverydata-matnr.
    *Get classes and characteristics
        CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
          EXPORTING
            objectkey_imp         = l_objectkey_imp
            objecttable_imp       = lc_objecttable_imp
            classtype_imp         = lc_classtype_imp
    *   READ_VALUATIONS       =
            keydate               = sy-datum
            language              = sy-langu
          TABLES
            alloclist             = i_alloclist
    *   ALLOCVALUESCHAR       =
    *   ALLOCVALUESCURR       =
    *   ALLOCVALUESNUM        =
            return                = i_return
    Thanks,
    Vinod.

  • How to find out the Tcodes for the exits

    Hi All,
    how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
    Customer Exits: EXIT_RFEBBU10_001
                              EXIT_RFEKA400_001
                              EXIT_RFFOEXIT_100
    User-Exits:  USEREXIT_DELETE_DOCUMENT
                       USEREXIT_FIELD_MODIFICATION
                       USEREXIT_MOVE_FIELD_TO_VBAK
                       USEREXIT_PRICING_PREPARE_TKOMP
    BADI: CUSTOMER_ADD_DATA_CS
              HISTORICAL_VALUES
              MD_ADD_ELEMENTS
              MD_CHANGE_MRP_DATA
              MD_PIR_FLEX_CONS
              MD_PLDORD_POST
              ME_REQ_POSTED
              NOTIF_EVENT_SAVE
    Can anyone help on this <urgency factor removed>.
    Regards
    Ksihore
    Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

    i have just started reading about all these-user exits ,customer exits etc.
    i have read somewhere that:call to customer exits are triggered by function modules exits.
    the structure of function modules are like this:
    EXIT_RFEBBU10_001
    MEANS
    Keyword EXIT followed by program name fllowed by three digits.
    and the call is like this:
    call customer function 0001.
    From above we can conclude that this customer exit must be used in program RFEBBU10.
    GOTO SE38 andenter prog name RFEBBU10.check for above function module.
    for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
    using Where used lists.
    please Tell me if i m wrong!

  • How to  find the user exit for a screen..

    Hi,
    plz help me how to find the user exit for a screen..?
    Regards
    Anbu

    Hi,
    check this program this will give you the list of user-exit and BADI for the perticular Tcode.
    REPORT  zuserexit_badi.
    TABLES : tstc,
    tadir,
    modsapt,
    modact,
    trdir,
    tfdir,
    enlfdir,
    sxs_attrt ,
    tstct.
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode,
    p_pgmna LIKE tstc-pgmna .
    DATA wa_tadir TYPE tadir.
    START-OF-SELECTION.
      IF NOT p_tcode IS INITIAL.
        SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
      ELSEIF NOT p_pgmna IS INITIAL.
        tstc-pgmna = p_pgmna.
      ENDIF.
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'PROG'
        AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
          WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
            WHERE pgmid = 'R3TR'
            AND object = 'FUGR'
            AND obj_name EQ enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
        SELECT * FROM tadir INTO TABLE jtab
        WHERE pgmid = 'R3TR'
        AND object IN ('SMOD', 'SXSD')
        AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(105) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
          SORT jtab BY object.
          DATA : wf_txt(60) TYPE c,
          wf_smod TYPE i ,
          wf_badi TYPE i ,
          wf_object2(30) TYPE c.
          CLEAR : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
          LOOP AT jtab INTO wa_tadir.
            AT FIRST.
              FORMAT COLOR COL_HEADING INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 'Enhancement/ Business Add-in',
              41 sy-vline ,
              42 'Description',
              105 sy-vline.
              WRITE:/(105) sy-uline.
            ENDAT.
            CLEAR wf_txt.
            AT NEW object.
              IF wa_tadir-object = 'SMOD'.
                wf_object2 = 'Enhancement' .
              ELSEIF wa_tadir-object = 'SXSD'.
                wf_object2 = ' Business Add-in'.
              ENDIF.
              FORMAT COLOR COL_GROUP INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 wf_object2,
              105 sy-vline.
            ENDAT.
            CASE wa_tadir-object.
              WHEN 'SMOD'.
                wf_smod = wf_smod + 1.
                SELECT SINGLE modtext INTO wf_txt
                FROM modsapt
                WHERE sprsl = sy-langu
                AND name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
              WHEN 'SXSD'.
    For BADis
                wf_badi = wf_badi + 1 .
                SELECT SINGLE text INTO wf_txt
                FROM sxs_attrt
                WHERE sprsl = sy-langu
                AND exit_name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED ON.
            ENDCASE.
            WRITE:/1 sy-vline,
            2 wa_tadir-obj_name HOTSPOT ON,
            41 sy-vline ,
            42 wf_txt,
            105 sy-vline.
            AT END OF object.
              WRITE : /(105) sy-uline.
            ENDAT.
          ENDLOOP.
          WRITE:/(105) sy-uline.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No.of Exits:' , wf_smod.
          WRITE:/ 'No.of BADis:' , wf_badi.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(105) 'No userexits or BADis exist'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(105) 'Transaction does not exist'.
      ENDIF.
    AT LINE-SELECTION.
      DATA : wf_object TYPE tadir-object.
      CLEAR wf_object.
      GET CURSOR FIELD field1.
      CHECK field1(8) EQ 'WA_TADIR'.
      READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
      MOVE jtab-object TO wf_object.
      CASE wf_object.
        WHEN 'SMOD'.
          SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
          CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
        WHEN 'SXSD'.
          SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
          CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
      ENDCASE.
    Reagards,
    Bharat.

  • How to find out the description for the given field?

    Hi All,
    How to find out the description for the given field?
    I mean ETTYP  Desription is VTEXT. This we can find in TVEPT  Table. So, How canwe find this?
    Thanks in Advance
    Sri...

    Hi  Avi,
    If i want to disply the  fields like   AUART and 'Description of AUART',
    Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
    my question is if i have given T184-AUART  and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
    Thanks in Advance
    Sri...

  • URGENT: How to find out the Tables for Routines  in BW.

    Hi BW Gurus,
    How to find out the Tables for Routines  in BW.
    I have this routine id <b>45XFAEI7LKIFIRDUKQG127YWW</b> and it is in inactive state and i want to activate it.
    thanks in advance,
    points will be rewarded.
    Regards,
    Maruthi.

    Hi Maruthi,
    Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
    Cheers,
    Praveen.

  • How to find out the link for the tables for sub contract PO

    Dear All,
    How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
    Please provide the solution for the Table related to ABAP.
    Thanks,
    V.V.

    Hi,
       Make use of the table EKKO, EKPO...
    For subcontract please select the option in EKPO-PSTYP.
    Regards
    GK.

  • How to find the text id for the text in the sales order

    Hi all,
    How to find the text id for the item-text in the sales order?
    There are different Text available in  the sales order under item like Warehouse instruction, CSR instruction...
    I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
    Table TTXID contains the validation of the Text id.
    Please help me in knowing the way to identify the text-id from the text list..
    Thanks foryour help
    Suresh Kumar

    U can fetch the texts for the items using
    Read_text.
    Example:
        g_f_tdname = xvttp-vbeln.
        g_f_obj = p_obj.
        g_f_langu = 'DE'.
        REFRESH g_t_lines.
        CLEAR g_t_lines.
        CALL FUNCTION 'READ_TEXT'
             EXPORTING
                  id                      = p_var
                  language                = g_f_langu
                  name                    = g_f_tdname
                  object                  = g_f_obj
             TABLES
                  lines                   = g_t_lines
             EXCEPTIONS
                  id                      = 1
                  language                = 2
                  name                    = 3
                  not_found               = 4
                  object                  = 5
                  reference_check         = 6
                  wrong_access_to_archive = 7
                  OTHERS                  = 8.
        IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    The Required fields are,
    Text-id ,language,name,object.
    Let me know if you further require help.
    Regards

  • How to find the workflow admins for all costcenters ?

    Dear SRM gurus
    We are using Classic scenario with N th step workflow with BADI.
    we have a requirement.
    How to find the workflow admins for the particular costcenters.
    we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
    used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
    Is there anyway to find all the admins for a cost center(users are more than 7000+)
    can anybody send work flow related presentations or cookbook
    Thanks in Advance.
    srinu

    hi
    I have not received any thing.Please send again
    [email protected]
    [email protected]

  • Where and how to find the storage locatation for the consignment stock

    where and how to find the storage locatation for the consignment stock (customer stock )  for more than one storage location .
    table :msku
    material no    -   werks - batch
    xxx                   sg11  - 200352ac
    table : mchb
    material no    -   werks  -lgort - batch
    xxx                   sg11   sg10   200352ac
    xxx                   sg11   gs11   200352ac
    note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

    Hi,
    Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
    Regards,
    JLN

Maybe you are looking for