How to find EH GUID for unprocessed event message id?

Hello  SCEM experts
I need to know how to fetch header GUID from unprocessed event gu id
In /SAPTRX/EVM_HDR table we have the event guid of unprocessed events under field EVT_GUID
I need to find the linkage of this unprocessed event with the main header guid ( like field ''EH_GUID" in table /SAPTRX/EH_HDR).
Issue: we need to write the report to process the thousand of unprocessed event messages in the /SAPTRX/EVM_STATUS
please let me know if anyone has worked on the same requirement like how we can reprocess unprocessed messages
Thanks

Hello Steffen
The example you have mentioned is not the case in my situation.
Here in system , I can see the unprocessed entries in table "/SAPTRX/EVM_UNPR". The same entries I can also see in table/SAPTRX/EVM_HDR but not in anyother SAP table.
I have checked the SAP NOTE# 656990 - Important background jobs for SAP
Event Management
There are 3 reports mentioned iN NOTE:
1) /SAPTRX/PROCESS_LOCKED_EHS
2) /SAPTRX/PROCESS_LOCKED_SETS
3) /SAPTRX/R_REPOST_AI_LOGS
After executing the above reports the problem has not solved yet.
As this is very common behaviour how we can reprocess these unprocessed events.
Many thanks

Similar Messages

  • How to find the guid for the follow up doc!!

    Hi All,
    I am creating a follow up doc i.e Complaint.Let me know how will i find the guid or complaint id
    in CRM at the object level in buffer before the complaint is created in CRM.
    Thanks..

    Hi Anjum,
    You will not be getting the object ID untill you save the document in CRM. You can get the GUID of the document in CRM before saving the complaint.
    How you are creating the complaint, means using crm_order_maintain fm or using BOL code?
    If it is BOL code you will get from BTADMINH context node you can fetching GUID attribute value.
    If it is Order_maintain FM you will creating a GUID on your own and passing it to ordermaintain FM.
    Best Regards,
    Dharmakasi.

  • How to find the IDOC for the archived message in integration engine

    Hello experts
                              In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
    My question is how to find the archive message IDOC num
    We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
    Kindly provide the solution for the issue, Is there any alternative to find the idoc?
    I can search with partner in sap side but i can get lot of idoc's
    Thanks & Regards
    Rajashekar

    > We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
    >
    > I can search with partner in sap side but i can get lot of idoc's
    Hi,
    If solution given by experts in above replies doesn't work then you can try below method.
    What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
    Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
    This will help you get you IDOC.
    Regards,
    Sarvesh

  • How to find job name for an event

    Hi,
    I have some event triggered process chains running in BW. The event starts a job in the source system.
    I know the event name but I don't know the job name getting triggered by it.
    Please let me know how to get it.

    Hi,
    I have some event triggered process chains running in BW. The event starts a job in the source system.
    From your statement, it appears that the event is firing the Process Chain. The PC could then be firing the job in the source system (through an Infopackage or something).
    Is this understanding correct? If not, how do you know that the event in BW is firing something in ECC?
    Regards,
    Suhas

  • How to find  USER-EXIT  for tcode - F110

    I am new in  USER-EXIT  Please help   how to find  USER-EXIT for  F110
    ASAP

    Hi,
    Enhancement/ Business Add-in            Description
    Enhancement
    RFFOX074                                Frame for user exit RFFOX074 (in program RFFOCH_U)
    RFFOX075                                Frame for user exit RFFOX075 (in program RFFOCH_U)
    RFFOX081                                Frame for user exit RFFOX081 (in program RFFOF__T)
    RFFOX082                                Frame for user exit RFFOX082 (in program RFFOF__T)
    RFFOX100                                Frame for user exit RFFOX100 (in program RFFOUS_T)
    RFFOX101                                Frame for user exit RFFOX101 (in program RFFOUS_T)
    RFFOX102                                Frame for user exit RFFOX102 (in program RFFOUS_T)
    RFFOX103                                Frame for user exit RFFOX103 (in program RFFOUS_T)
    RFFOX104                                user exit
    RFFOX105                                Frame for user exit RFFOX105 (in program RFFOUS_T)
    RFFOX200                                Frame for user exit RFFOX200 (in program RFFONZ_T)
    RFFOX210                                Frame for user exit RFFOX210 (in program RFFOAU_T)
    RFFOX211                                Frame for user exit RFFOX211 (in program RFFONZ_T)
    RFFOX230                                General program for user exit RFFOX230 (in program RFFOJP_L)
    RFFOX240                                Enhancement for User Exit 240 (RFFOAT_P)
    RFFOX250                                Enhancement for User Exit 250 (RFFODK_E)
    RFFOX901                                Framework for user exit RFFOX901 (in program RFFOM100)
    RFFOX902                                Framework for user exit RFFOX902 (in program RFFOM100)
    FDTAX001                                Enhancement to Transaction FDTA (event after the download)
    FEDI0002                                Function exits for EDI DOCS in FI - Incoming pyt adv.notes
    FEDI0003                                Function exits for EDI docs in FI - Save PEXR segments
    FEDI0004                                Function exits for EDI docs in FI - particular events
    FEDI0006                                Function Exits for EDI-docs in FI: Save IDCR Segments
    RFFOX003                                Frame for user exit RFFOX003 (in program RFFOM100)
    RFFOX041                                Framework for user exit RFFOX041 (in program RFFOBE_I)
    RFFOX042                                Framework for user exit RFFOX042 (in program RFFOBE_E)
    RFFOX043                                Framework for user exit RFFOX043 (in program RFFOBE_D)
    RFFOX061                                Frame for user exit RFFOX061 (in program RFFOCH_P)
    RFFOX062                                Frame for user exit RFFOX062 (in program RFFOCH_P)
    RFFOX063                                Frame for user exit RFFOX063 (in program RFFOCH_P)
    RFFOX064                                Frame for user exit RFFOX064 (in program RFFOCH_P)
    RFFOX065                                Frame for user exit RFFOX065 (in program RFFOCH_P)
    RFFOX066                                Frame for user exit RFFOX066 (in program RFFOCH_P)
    RFFOX071                                Frame for user exit RFFOX071 (in program RFFOCH_U)
    RFFOX072                                Frame for user exit RFFOX072 (in program RFFOCH_U)
    RFFOX073                                Frame for user exit RFFOX073 (in program RFFOCH_U)
    Business Add-in
    FI_BSTM_MC_EXIT                         FI Account Statement: Exit from MultiCash Conversion
    FI_F110_SCHEDULE_JOB                    F110: Check before scheduling a proposal/update run
    No.of Exits:         36
    No.of BADis:          2
    Arunima

  • How to Find Business Objects for any Tranaction .

    Hi Abapers,
                        How to find Business objects for any transcation.....  and how to connect the Work flow to  any  Trancation  so that for example any body changes the date of Birth ...... so that the work flow should trigger .
    Thanks & Regards
    Bhaskar Rao.M

    Hi Bhaskar,
    For finding business object,you can try transaction SWO4 and by checking the documentation in it you can find your required business object.
    Another method is:
    1) Go to Trx SWE4 and switch on the event trace.
    2) Run your transaction which you want to use for triggering your workflow.
    3) Run transaction SWEL and find your Business Object and related event in it.
    For connnecting your WF to your transaction you have to create a start event in your WF in SWDD,where in you specify the Business Object and start event which you find using above method.
    Eg.You want your WF to be triggered whenever you have an error in your idoc.For this your BO will be IDOCAPPL and your event will be (inputErrorOccurred).This you will give in header data in SWDD.
    Neerja

  • How to find serial Number for BCC Plugin?

    Hi,
    How to find serial number for Bcc plugin on FCP?
    I need format my Mac so before that I to find the serial number?
    Please anyone can help me....

    The serial number has the format like E-111-aaa-222-bbb-333-ccc-444-ddd-5ee-ffff, it can be found on a piece of paper which has 3 stickers with it inside the box.

  • How to find function code for buttons on toolbar in oops alv

    Hi experts,
    I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
    method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

    Hi Prakash,
    -->First you have to set the pf status in your alv program by,
    {FORM pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'FIRST'.
    ENDFORM.                    "PF_STATUS}
    -->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
          i_callback_pf_status_set          = 'PF_STATUS'}
    *-->Then doble click on that pf status,
    From the menu bar, select Extras->Adjust Template->List Viewer,
    This will give you the existing statndard gui status of the program*
    ->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
          i_callback_user_command           = 'COMM'
    And make a subroutine of the name 'COMM'i.e,
    FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
      DATA: okcode TYPE sy-ucomm.
      okcode = ucomm.
      CASE okcode.
        WHEN 'REF'.
        CALL FUNCTION 'POPUP_TO_INFORM'
          EXPORTING
            titel         = 'MANSI'
            txt1          = 'CREATED BY'
            txt2          = SY-UNAME
          TXT3          = ' '
          TXT4          = ' '
    endcase.
    Hope it helps you
    Regrds
    Mansi

  • How to find workarea ID for the work area name.

    Hi Experts..
    How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
    Points would be rewarded for helpful answers..
    Thanks
    Kunal Halarnakar

    U want to fetch the workarea description ?
    we can fetch it from CCIHT_WALD table with the RECN value.
    The informations are stored in AUSP table with the characterstic(ATINN) value.

  • How to find print preview for purchase order like what we find in va03

    hi guru's
    how to find print preview for purchase order like what we find in va03
    let me share ur information
    thank u

    Hi
    You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
    Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
    you will see the print preview
    Similarly for RFQ output use the Tcode ME9A
    for Contrat use ME9K
    for GR output use MB90
    Reward points for useful Answers
    Regards
    Anji

  • How to find the patches for perticular concurrent program

    HI
    How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
    Thank's

    Query the concurrent program in Sysadmin responsibility.
    Note the concurrent executable.
    Query the concurrent executable in Sysadmin.
    Note the file name.
    If it is a package, open the package in TOAD and note down the file name.
    If it is a report/form, open it in form developer and note down the file name.
    Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
    Hope this answers your question
    Sandeep Gandhi
    Independent Consultant
    513-325-9026

  • HOw to  find the text for PERSK field in infotype 0001

    hi all
    HOw to  find the text for PERSK field in infotype 0001

    Hi
    T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
    ..lakhan

  • How to find MATCH count for #  in a String

    Hi all,
    How to find MATCH count for #  in a String.
    Ex:  6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20
    Regards,
    Balavardhan.K

    >
    balavardhan k wrote:
    > I have used below syntax to find count but it is not returning the value and SY-SUBRC  = 4.
    >
    >
    > Data : l_text type string.
    >
    > l_text = '6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20'.
    >
    >
    > FIND ALL OCCURRENCES OF '#' IN L_TEXT MATCH COUNT mcnt .
    Then it's not a # but possible a horizontal tab-sign.
    Do a find on cl_abap_char_utilities=>horizontal_tab instead.
    Edited by: Maen Anachronos on Nov 23, 2010 2:48 PM

  • How to find system status for production orders?

    How to find system status for production orders?
    looked into table AUFK, AFKO and AFVC but none of these tables, carry
    system status as part of the fields(STTXT)
    I tried to filter in COOIS, but not much help
    Able to find system status information in COHV,Is there any other way where
    I can find system status information for production orders
    Kindly guide

    Hi,
    Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
    But, it is very difficult to combine the details like Order and System status.
    Take the help of your ABAPer to generate Report for you.
    Regards,
    Siva

  • How to find condition  type for a particular material document no.

    hiiiiii
    How to find condition type for a particular material document no.

    Hi
    Condition types are maintained at PO level
    Take the EKKO-KNUMV and pass to
    KONV-KNUMV field and take the different condition types values from KONV
    Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
    see the table T685 for different condition types.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

Maybe you are looking for

  • Free nano w/ computer purchase-no reimbursement??

    I ordered my macbook when the promo of getting a free ipod nano was running; however, I have my macbook (love it) but never received reimbursement for the nano since I was charged for it in the beginning then was suppose to be sent a check? Or was I

  • Can I use canon eos40d for stop motion capture in premiere elements 9?

    I Want too do stop motion capture but when I click get media, the pop up dialog box proceeda as if to import still photos. How do I get the "capture panel" that is talked about where I can select stop motion?  Is premiere elements 9 supposed to work

  • JavaScript Console Problem (only in LS preview mode)

    Hello, my JavaScript console "crashes" in preview-mode in lifecycle designer. It just appears for a "millisecond"´, well I see it flicker at last. It doesn't matter if there is a syntax error or if I try to start the console by clicking a button ( Ev

  • The same query but different plan?

    Hi all I don't understand why the same query but Oracle use different plan explain plan for select far.id,fab.id from agent_body fab INNER JOIN agent_ref far ON (far.bodyid = fab.id) WHERE fab.id=72449; | Id | Operation | Name | Rows | Bytes | Cost (

  • IPad 3 vs calibrated macbook display

    Dear all, please allow me to ask the following. I have a rather old Macbook unibody 13" dating back, at the end of 2008 which i use to process my photos. Its screen is calibrated using a Spyder 3 calibrator. When i process the images and transfer the