How to find font in Indesign, which is in Windows Font Folder?

Hi
I need to use Monotype Sorts font.
This font was not in the Indesign list of fonts.
I bought the font and downloaded it to a file on my hard drive.
It is called Monotype_sorts.ttf
I then went to Windows Font Folder in Cpanel and installed it.
I then followed advice I found on the web and copied the font to the Adobe/Indesign CS5/ Fonts folder.
However I still can't see the font within Indesign in order to use it.
Any help would be very much appreciated as I need to try and work this out very quickly.
I'm on Windows Vista.
Many thanks liz

function(){return A.apply(null,[this].concat($A(arguments)))}
... I then went to Windows Font Folder in Cpanel and installed it.
I then followed advice I found on the web and copied the font to the Adobe/Indesign CS5/ Fonts folder.
That was some bad advice you got there. Indesign is fully able to use all of your installed fonts -- the ones in Windows. Only a very few specialized types of fonts that cannot be installed in Windows need to go into ID's "private" Fonts folder. (And another reason would be you want to keep your Windows system 'clean'.)
The problem may very well be that InDesign now sees two versions of the same font, and refuses to let you select either, just to make things not too complicated. So delete the font in one of your locations.
If that doesn't work either, read this thread on how to reset InDesign's internal font database:
http://forums.adobe.com/thread/424137?decorator=print&displayFullThread=true

Similar Messages

HT2509 Hello I wonder if anyone knows how to find, download and install a suitable IPA (phonetics) font for the Mac Air? I need to be able to use a pop up window of fonts.

Hello I wonder if anyone knows how to find, download and install a suitable IPA (phonetics) font for the MacBook Air? I need to be able to use a pop up window of fonts.

Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.

How to find screen no. of a pop-up window?

Hi friends,
Any one can let me know, How to find the screen no. of pop-up window?
Thank,
Punjaala

To find screen no of a pop-up screen, in debuggin mode give break point at call screen statement.
Usually pop-ups would be called by call screen starting in (x,y) cordinates. so it'll stop at that point.
you can find out the pop-up details there.
Regards,
Joan

How to find "start-dreamweaver-first-website" zip in local site folder?

Hallo...
I have download that file already. But somehow it does not show up on the "local site folder" when i want to save it as in the tutorial video suggest....
Do i need to do anything else before that to save it.???
BTW, how to unzip that folder....??
Thanks a lot.

Dear Ken:
Many many thanks...[?]
2015-03-08 19:22 GMT+08:00 Ken Binney <[email protected]>:
how to find "start-dreamweaver-first-website" zip in local site
folder? created by Ken Binney
<https://forums.adobe.com/people/Ken+Binney> in *Dreamweaver support
forum* - View the full discussion
<https://forums.adobe.com/message/7264408#7264408>

How to find the table in which data from a structure sits

Hi,
I want to know how to find the exact table where data sitting in various structures during runtime are stored.
For instance,in ME23N we have various tabs and data in those are held in various structures. This we can see by checking the technical setting of each field.
I want to know in which table the data is actually stored for each field and how to find them.
Any other means other than using "WHERE USED" option?
Thanks
CM

After checking for technical field from the screen, when you reach out to structure, you can dbl click on the particular field's data element. From this data-element you can get to know in which tables it is used. Also if the data element refers to some master data field then you can check out its domain and in the domain you can refer the<b> value table</b> for that domain. This is what i will do if i am not sure about anything.
Hope it will help a little.
Jignesh.

How to find out the columns which has 16 digit credit card number

Hi All,
I have a requirement where in i need to find out the columns which has 16 digit credit number in it and create a report with owner, table name and column name.
The issue is that the credit card number can be entered in any columns of any table of any schema. For example the credit card number can be entered in any description field(eg: The number is 4001412134642881), in that case i need to filter only the numbers and do the LUHN check to validate the credit card number.
Please provide me a suggestion on how to scanl the values of all the columns to know the column which has credit card number.
Regards,
Raj.

Tell me this - how the hell do you have a database with credit card number data and NOT know which columns of which tables contain credit card numbers? (and how on earth is this data NOT encrypted!?)
How is what you want to do, NOT a fishing expedition to hack a database that may or may not be storing credit card details?
And do you honestly think that we should simply trust that once you have extracted these numbers, performed a Luhn algorithm to verify these as credit card numbers, you are not going to fraudulently use these credit card numbers!?
I have marked your posting as an attempt to hack an Oracle database for fraudulent use of credit card data. I hope that your OTN account is terminated soon and trust that your too much of a coding idiot to actually succeed in this endevour.

How to find out the values which are assigned in authority group

Hi to all
Please tell me where can I find out the values which are assigned in authority object according to roles.
for ex :
         Changed    Customer: Account Authorization                              F_KNA1_BED
          Changed    Customer: Account Authorization                              T-DR50175601
            Activity                       01, 02, 03, 08                                                              ACTVT
            Authorization Group            5100                                                                        BRGRU
F_KNA1_BED is the authority object , assigned to one user.
He can access the authorization group 5100. I want to check that value in my program.
How ?
Where it is stored.
Please help me....
Regards
Anubhav Gupta

Hi Anubhav,
Please use this FM "SUSR_USER_AUTH_FOR_OBJ_GET" and pass the object name in it . You would get the values for that particular object.
Thanks
Nitin Sachdeva

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

How to find list of accounts which are moved out?

Hello Experts,
Can anyone please tell me how to find inactive accounts i.e. which are moved out.
following logic has been given but i am not able to find the inactive accounts.
The inactive accounts can be identified by the Move-In/Out dunning procedure.
is there any table where i can find out?
Thanks,
Sarang
Edited by: sarang gujrati on Dec 30, 2008 10:26 AM

Query on table : EVER.
select vertrag from ever where auszdat(move-out) = sy-datum.
EVER table
EINZDAT ( Move-in date)
AUSZDAT( Move-out-date)
EAUS :: Move-in Doc. for Cont Account.
EAUSV :: Move-in Doc. for Cont.
You can query on these tables also.
Let me know if you need more information on this.
Regards,
Shiva Kumar

How to find a t.code which calls a certain program?

Hi All,
could anyone tell me if ther's a way to find a t.code which calls a certain program?
Such as, I'd like to know if ther's a t.code linked to the program RFEBKA96
Thanks
Gandalf

Hi,
go to transaction SE11 or SE16.
give table name TSTCT.
you pass the transaction, you will get the description of that transaction.
Regards,
Tutun

How to find remaining space left in the main window

Hi Guys,
In one of the smartform there is a MAIN WINDOW, in which a table will be displayed with 3 or 4 entries for each material. ( so that atleast 3 tables are displyed on a single sheet)
Some times if the space is not enough in the main window to display the contents of the table, the contents will be displayed in the next page. (Eg - 1 entry at the end of the page with the header at the end of the page and remaining entries int he next page with the header, which is satisfying the client's requirement)
Problem is some times only header gets displayed at the end(end of the main windw), but so space is avaliable to display the contents, so the contents will be displayed in the next page with the header again,
so the end user will be seeing a header at the end of the page with no contents,
Is there any way to solve this(Not to dislay the header if the contents of the table cannot be displyed)
Is there a way to find the remaining space in the main window dynamically so that if i am able to find the remaining space is JUST 1 LINE ( or CM or INCHES), then I can put a condition for not displaying the header).
Regards,
Naveen.

Hi,
In smartforms, there is no other way to find the remaining height of the main window on a page.
Hence, another way to solve this is to restrict the contents of the table with templates designed such a way that if there is header and items then display exactly a set of rows which would fit clearly on a page.
Also make the folder as page protected.
This is tedious but there is no other way i think as we also faced similar kind of issue.
Regards,
Ram

Im looking how to find driver for Printer HP 2300 driver window 8 (64BIT) PLEASE help !!! stuck

Hi ,
I need help how to find driver for my old printer HP 2300d I use USB Cable for my Laptop window 8 (64 bit)
help I am stuck can't print anything.
Kim

Hi, Welcome to hp forums and enjoy your stay, feel yourself like home here!
I am very sorry to hear this, I will try my best to help you, I am always glad to help!
Please follow the steps i provided below:
1. http://windows.microsoft.com/en-ca/windows7/automatically-get-recommended-drivers-and-updates-for-yo...
Now refer to the below link and right click your printer device
2. http://pcsupport.about.com/od/windows-8/a/update-drivers-windows-8.htm
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

CS3: Fonts missing even though installed in Windows\Fonts

Fonts are "missing" when opening a CS2 Indesign document in InDesign CS3.
For example, a document uses Adobe Caslon Pro Bold. Under InD CS2, this font was located in Program Files\Common Files\Adobe\Fonts. That directory is now empty (except for some additional fonts that weren't part of CS2). I guess uninstalling CS2 cleaned out this directory.
When opening the document in CS3, I get a message about a missing font. The only available Caslon face is "Regular".
There are 5 Adobe Caslon faces installed in Windows\Fonts (regular, bold, italic, bold italic, semibold, semibold italic). But CS3 doesn't recognize anything but "regular".
I had made backup copies of all Adobe fonts that I had installed with CS2, so I copied those backups to Program Files\Common Files\Adobe\Fonts. Now InD CS3 finds them.
Has anyone else had this problem? What is the solution? I have re-installed CS3 but this doesn't fix it.

First up, ATM. ATM4.0 (Light or Deluxe) is not supported under W2K or XP and should be uninstalled. After that, the 4.1.2 patch should be run, which just edits the registry, since removing ATM leaves Windows unable to install Type 1 fonts. Uninstalling ATM4.1 on any Windows platform prior to Vista (which it's not supported under) causes PFM files to be left unassociated with the system font applet preview page. The patch fixes that too. These are the only problems with having ATM on XP and they're usually easily fixed.
My first step would be to remove ATM because you're running an unsupported version.
> I did not try the current "light ATM" release because the release text on the Adobe site did not suggest the necessity to upgrade.
Well, that version of ATM will not state anywhere that it supports XP (given that it predates XP), so the prudent course would be not to install unsupported software until you're sure it will do no harm. And entering the terms "ATM" and "XP" into Adobe's search engine quickly turns up advice not to install any version prior to 4.1.
> Is there any reason one should only use OT fonts in ID?
If you're working cross-platform (as you are), then OT is definitely the preferred option, but ID can utilise Type 1 and TrueType fonts with no problems.
I have most of the BT Futura fonts you listed, though I only have the T1 versions to hand, though I could dig out the TT ones and might. But there are a couple I'm not clear on from your list: BT (do you mean you have BT Regular or Roman and BT Book installed and accessible in FrameMaker?); Medium/Extra Bold Cond (is this medium condensed and extra bold condensed, because you have also listed MdCn BT?); TMed (what's the full name of this?).
Apart from those three, all the fonts showed up in ID, once I had deactivated the TT versions that came with Windows. Most were listed as variants under Futura BT, including the roman of LtCn BT and MdCn BT. The last two fonts showed up as separate entries in the font list, but only the itals variant, as you saw.
There is a bug in ID that leaves it sometimes unable to distinguish between regular and book weights, but the issue here seems to me to be one of strange style links in the BT fonts, not anything to do with ID.
To summarise, remove ATM, check you don't have the Windows TT versions active, and then check all the variant drop-down menus. Then report back here.

How to find in Metro tube which service sent request to another service

Hi Guys,
I have following question regarding use of Metro tubes:
In SOA system composed of number of Web Services deployed on multiple GlassFish servers (with Metro container); I have a tube library which is loaded on start of GlassFish and for each request message sent by any servlet or Web Service to another Web Service needs to detect address of the destination service (that is the easy bit) and which servlet or Web Service sent the request (here is the problem). This information is not contained in the packet. I would expect it should be possible to find it in the context object ClientTubelineAssemblyContext and getContainer(), however, so far I have not found out how.
Any help will be appreciated
Petr

Check your emails, this number should be in the confirmation email, also call the level one phone support, they can find out that with the serial number of your computer, or your other private information, such as address etc.

How to find photos in iPhoto which may not be there - but appear.

An acquaintance of mine has by accident deleted a bunch of photos from iPhoto, assuming he had already moved them into another folder. Somethings strange happened, as the still appear to accesible, but then again not really. I have promised to help him, and he explains his actions like the following:
1. I transferred my photos from a Fujifilm Finepix camera to a New Event (A) in iPhoto.
2. I then deleted the photos on the camera.
3. Then I made other new folders/events (B) with other names.
4. I moved the photos from folder A to these new folders B without any problems (I can still see these photos as small bitmaps, please see later)
5. Then I created another event, but by accident I gave it the same name as the folder A in which the photos originally were.
6. I then deleted this original folder A from which the photos had been removed, as I assumed it was empty.
7. Now - this process has caused that the photos have disappeared everywhere, and I cannot see the photos in folder B. However, empty frames of the photos appear there.
8. Also, when I press the Edit button at the bottom of iPhoto, all the photos appear at the top as small bitmaps, but they cannot be opened.
9. The photos cannot be seen in Finder, in Trash inside iPhoto or in the normal OS X Trash bin.
Now, the question is: are the photos to be found for recovery somewhere in iPhoto (or elsewhere) which we as amateurs do not know about - since they appear as thumbnails?
I hope somebody can help.
Thank you kindly.

first off we only have words to communicate with so it is important to use them correctly adn consistantly
You seem to be using folders and events interchangelably
In iPhoto folders are organizational elments that do not hold photos - they hold albums or other folders -- are you talking about events in every case or are you talking about finder folders (which do hold files that may contain photos) accessed via the finder and events accessed via iPhoto?
Thumbnails are totalklyt seperate from the main photo - iPhoto always has either two or three versions of a photo used for different purposes - a thumbnail and the oriiginal plus possibly a preview of the photo - these are each in seperat files (and in seperate folders within the iPhoto database) and any of the three can be missing due to datgabase errors or user actions - without exact and accurate information we can only make guesses about yoru situation
How were the photos moved from event (I assume) A to B
How did you delete event A
What version of iPhoto and of the OS?
LN

How to find font in Indesign, which is in Windows Font Folder?

Similar Messages

Maybe you are looking for