How to find from Data target filled by which process chain.

hi all.
i have list of cubes i want to know that which cube is filled by which prcess chain ...
can anyone suggest me appropriate solution.
simply i want to know that when reconcilation which process chain affect on which bex report so that if one process chain got failed then i will not generate that specific report for that day..
i have list of multiprovider on which we are generating rports and tech. name of report also i have.

Ganesh ji,
Choose your infopackage which holds the data targets, in the Infopackage screen reach the Scheduler tab and you will find the where-Used list. This will let you know the particular process chain responsible.
thanks
Prabhakaran
09176665954

Similar Messages

Fill aggregates through process chain?

hi,
we are creating aggregates on cube for perticular characters. when i use same thing in process chain, i am getting cube level, how can i find perticular character while filling aggregates in process chain?
regards
ss

Hi Suneel,
When you created the aggregate, you specified that chars that you wanted to put in each aggregate. Now in the process chain you just need to specify which cube's aggregates you want to be updated. No need to mention that chars again.
Hope this helps...

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

How to find from which table we r fetching the data

Hi friends,
i got a requirement to design a query,in my transfer rules i check the info object related to the fiels.but in my crm the field name is different.
how to find from which table the field is fetched........
please tell me........
Regards
sridath

Dear Sridath,
In ST05 switch on the SQL Trace.
Goto RSA3.
Give your DataSource name > Execute
Goto ST05...Switch OFF the Trace
Analyze the Trace file
Gives you details about the fields and Tables from where you are fetching.
OR
Goto LBWE
Find your DataSource > Maintenance > Display mode
In right side window...expand ALL list box...
Exclude MC and take other words...they are the Source Tables.
Regards,
Ramkumar.

How to find out the Target Component name and Target view name

Hi All Expert,
                  I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
Thanks in Advance....
Vishwas Sahu

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

HOW TO FIND OUT VA TARGET IN MATERIAL COSTING

Hi experts,
    how to find out va target in material costing. I got a field from keph-kts004 but i cant able to find out how it is calculated.
Whenever costing using ck11n for one material va target coming correct value but using ck40n for multiple material va target coming incoorect . it is taking previous material va target value .
   Please help on this one and u can get reward points,
Thanks,
venky

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

How to find Archive data In SAP

Hi experts ,
How to find Archive data in SAP throught the following tcodes FTWL & AS_afb.
Thnx
Venky

Hello,
Transaction FTWL is for the DART files (not actually archived data) that are stored in your archive server. In order to run a query, or browse the DART file, you would need to "Import from archive" from within FTWL and then browse the file.
I am not sure what you mean by AS_afb. Please provide more information.
Regards,
Karin Tillotson

How to find the Date and Time of Modification of Column in aTable?

Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar M

I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

How to find the date my iPhone 4s was manufactured

Hi, Please can anyone tell me how to find the date my iPhone 4s 64gb was manufactured. I have the serial and i-m-e numbers. For some reason my Insurance company want to know, all I wanted to do was add the phone to my all risks policy. Thanks in advance for any advice.

That's all you will get, there is no way to know the manufactured date only the warranty status from date of original sale and it is most unlikely your warranty is still "good" on an iPhone 4

Could someone tell me how to find purchase date so I can register

Could someone tell me how to find purchase date so I can register my Airport extreme on the Apple Support Profile page?

Unless something has changed, the Apple does not provide a specific support warranty for their AirPort products. Instead, typically, you would get this type of warranty only if your purchased an Apple desktop or laptop at the same time and the AirPort would be covered under that one.
If you bought the AirPort directly from Apple, they should have a copy of the receipt. Otherwise, if you used a credit card, check with your card provider.

How to find login Date of a user

Hi,
Can someone please tell me how to find the date when a user logged into the messaging server.
What i am actually trying to do is as follows : I wan't to disable the account of a user if he does not access his mailbox for some time period.
The login date & time of a user can be seen from the logs but is there some other place/file where this is available?
Regards,
Shveta.

The logs are the only place where this information is available, currently. We are going to address this in a future release of the mail server. I can't provide detailed specifics, but know that things will get better in future versions.
Regards,
Chad

How to find Installation Date for each SQL installation

Dear All,
I need a basic info. How to find installation date of each SQL instance (My environment running with multiple standalone/cluster instances)?
So, I need a query to find installation date easily (I don't want to check it in registry by manual). Thanks in advance...

Hi Balmukund
This is the same answer that (1) Prashanth posted
from the start, letter on (2) Stan posted
this again with the same link, and now for the third time, (3) you posted it with the same link :-)
* This answer is correct for specific instance.
The OP asked a solution for several instances. Therefore he should execute this on each instance. As I mentioned he can do it dynamically on all instances, for example using powershell (basic logic is, first find all instances and than post this query in a
loop).
Ronen Ariely
[Personal Site] [Blog] [Facebook]
Then your answer is correct :)
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

REgd How to find appropriate data sourses for given tables in Inve Mngt

Experts!
M completely new to Inventory Mngt where i needto extract data from R/3,
they 've given me some tables, but i dont know how to find appropriate data
sourses for that tables
those are
MKPF,MSEG
EKKO,EKPO
EKBE,EKET
How to find right data sourses when table names given in any module??
pls guide me,
'll assign the points.
thanks
Srujan

Hi,
2LIS_03_BX is the initialization of your stocks; you'll need to perform the setup procedure for extracting this data.
Usually this DSource is used to bring the stocks positions at a given time; from this given time you'll then extract deltas from BF and UM so your stocks are always:
BX + BF(Delta) + UM(delta).
Hope this clears your doubts...
Olivier.

Can u give clear steps how to load 3 data target at a time by the help of p

can u give clear steps how to load 3 data target at a time by the help of parllalesim

hi,
create the load infopackage type and give the infopack you need to load.
create 3 similar process types.
chain should have this flow
start -> delet index(if cube is the target) -> load target(connect the load process to start process) parallel -> and process -> create index(if cube)/actiavtion of ods(if ods)
Ramesh

How to find the Data Type of a column

Dear All,
How to find the Data Type of a Column dynamically in oracle Form.
Thanks and Regards,
Fazil
Edited by: user11334489 on Aug 25, 2012 9:06 PM

hi,
you can use get_item_property built-in
eg:
declare
l_item VARCHAR2(10);
begin
l_item := Get_Item_Property('item_name',DATATYPE);
end;

How to find from Data target filled by which process chain.

Similar Messages

Maybe you are looking for