How to find function module
hi all,
how to find out particular function module suitable for this requirement.
how to findout fm
Hi Narendra,
Apart from above replies, you can find function modules this way:
1) Go to SE37
2) From Menu, click <b>Utlities</b> and select <b>Find</b> option.
3) A repository info system to find function modules will be opened.
4) Use wild cards in function module box or short description to find function modules.
PS: You can use this way to find programs in se38
Regards,
Vivek
Similar Messages
-
How to find function module in se37
hello friends,
i am supposed to extract revesion level, matnr, plant from sap to an excel sheet.
matnr and plant we can get from marc or mara, but i could not find revision level on these tables.
the technical name is REVLV
i searched for function modules in se37 i got 3 function modules, but there was no documentation,
how does anyone get tpo know which function module works for them , with out having documentation.Hi,
What is your requirement actually and what purpose I did't get you
any how I got these below FMs which is having the field REVLV
you can go through below FMs.
/SAPHT/DRM_MAT_BOM_READ
API_DOCUMENT_MAINTAIN2
API_DOCUMENT_SAVE_BOM
BAPI_DOCUMENT_CHANGE2
BAPI_DOCUMENT_CHECKIN2
BAPI_DOCUMENT_CHECKIN_REPLAC
BAPI_DOCUMENT_CHECKOUTCANCEL
BAPI_DOCUMENT_CHECKOUTMODIFY
BAPI_DOCUMENT_CHECKOUTSET2
BAPI_DOCUMENT_CHECKOUTVIEW2
BAPI_DOCUMENT_CREATE2
BAPI_DOCUMENT_CREATEFROMSRC2
BAPI_DOCUMENT_CREATENEWVRS2
BAPI_DOCUMENT_GETLATEST
BAPI_DOCUMENT_GETLATEST2
BAPI_DOCUMENT_GETSTRUCTURE
BAPI_DOCUMENT_WHEREUSED
BBP_PROD_REVLV_CHECK
C14SX_BAPI_DOC_CREATE2
C14SX_BAPI_DOC_CREATE2_EXIT
CAD_DISPLAY_BOM_WITH_SUB_ITE
CAD_ECM_READ
CDESK_CALL_CHECKOUT_WIZARD
CDESK_CHECKOUT_WIZARD
CDESK_CHECKOUT_WIZARD_RFC
CDESK_GET_STRUCTURE
CDESK_WHERE_USED
CM_DI_PROCEED_MAT_PROV
CO_SD_BOM_SELECT_DIALOG
CSAP_DOC_BOM_CREATE
CSAP_DOC_BOM_DELETE
CSAP_DOC_BOM_MAINTAIN
CSAP_DOC_BOM_READ
CSAP_MAT_BOM_CREATE
CSAP_MAT_BOM_DELETE
CSAP_MAT_BOM_MAINTAIN
CSAP_MAT_BOM_OPEN
CSAP_MAT_BOM_READ
CSEP_MAT_BOM_READ
CS_RT_DIALOG_CALL
CV115_ECN_CHECK
CV115_ECN_REVLEVEL_SET
CVAPI_DOC_CHANGE
CVAPI_DOC_CREATE
CVAPI_DOC_MAINTAIN
DMU_DOC_BOM_EXPLODE
DMU_DOC_BOM_READ
DMU_MAT_BOM_EXPLODE
DMU_MAT_BOM_READ
EXIT_SAPLQAAT_002
EXIT_SAPLQBCK_001
EXIT_SAPLQBCK_003
EXIT_SAPLQPL1_001
MB_CHECK_MPN_RELATION
MB_CHECK_MPN_VALIDITY
MB_MPN_CHANGE_READ_DATA
MB_SEARCH_HTN_MATERIAL
MEPO_CONFIRMATION_PAI
MEPO_CONFIRMATION_PBO
MEX_CHECK_REVISIONSSTAND
ME_CONFIRMATION_MAINTAIN
ME_SEARCH_REVISION_LEVEL
MMPUR_Q_INFORECORD_DISPLAY
QAAT_CHECK_QM
QBCK_INSP_TYPE_LIST
QBCK_INSP_TYPE_NEXT
QBCK_QINF_LIEF_ZAEHL
QBCK_QINF_QUANTITY_CHANGE
QBCK_QINF_READ
QBCK_QM_DOCUMENT_TEXTS
QBCK_QM_GR_CHECK
QBCK_QM_PUR_CHECK
QBCK_QM_PUR_MNG_UPD
QBCK_QM_SYSTEMS_COMPARE
QBCK_VB_QINF_PLOS2_POST
QBCK_VE_QINF_STATUS
QELA_QINF_SELECT
QPAP_PLAN_SELECT
QPL1_CHECK_CREATE_POSITION
QSS1_QINF_SHOW
QSS2_REVLV_F4
RFC_DISPLAY_BILL_OF_MATERIAL
ZQM_CREATE_05_INSPECTION_LOT
Regards
Ganesh -
How to find function module's and tables used for the particulat screen or TCODE?
Hello Nation,
I would like to know how to find the function modules and tables used for the particular screen or TCODE or program.
Example : I would like know the function module used in the program RDBGFT?
How can i find that?
Thanks in advance ,Awaiting your reply.Make use of Find function with the keyword "CALL FUNCTION".
Make use of the same find function with the keyword "Select" to know the database tables used.
Regards,
Philip. -
How to find function module exit name when i know the Include
As per my requirement i should change the existing exit. I know the include name but i want to
know exit name. How to find out exit name based on include name. I tried Where-used list but it
is not giving the exit and function module name.Please let me know.
Regards
RajithaHello Rajitha,
1. You can do a "where-used" for the include & get the corresponding name of the exit function module.
2. Goto table MODSAP & in the field MEMBER pass the name of the function module & you will get the Exit Name in the NAME.
Hope this helps.
BR,
Suhas
Edited by: Suhas Saha on Mar 16, 2009 3:08 PM -
How to find function module call in 'BP_GIVE_MESSAGE' in BAPI
Hi experts
i want debugg the BAPI_GOODSMVT_CREATE to find out what data passing to 'BP_GIVE_MESSAGE' function module.
i tried to find through FIND button i could not find it.
please can you tell me how can i find call 'BP_GIVE_MESSAGE' in BAPI_GOODSMVT_CREATE source code.Hi experts
i want debugg the BAPI_GOODSMVT_CREATE to find out what data passing to 'BP_GIVE_MESSAGE' function module.
i tried to find through FIND button i could not find it.
please can you tell me how can i find call 'BP_GIVE_MESSAGE' in BAPI_GOODSMVT_CREATE source code. -
How to find function modules used in maintenance table views
Hi,
How do I find the function modules used in maintenance table views?
I'm using SM30 and trying to open the custom table but there is an error message saying CREATE DATA PROCESSING FUNCTION MODULE.
Thanks.
Kathhi
in se80 select functon group and put your table function group name there and click display. it will show you the function modules used for that tables.
Regards
Madhu -
How to find Function Module & Program Name Used by IDOC
hii Experts,
i want to find program name & function modules used in IDOC. I have Idoc type, Message type & extension type.
Help meHi Vinod,
Go to transaction WE64, click on the <b>search for message type</b> or press <b>shift+F6</b>. A popup will be displayed and here enter the message type for example 'QUOTES', u will be taken to the process codes available for the message type u have entered. click on the process code and data related to that process code will be displayed in the right hand side. Now double click on the process code, a pop up with function module name will be displayed. copy that and search for where used list in SE37.
Hope it helps.
Regards,
Phani. -
How to find function code for buttons on toolbar in oops alv
Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALVHi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM. "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
i_callback_pf_status_set = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
i_callback_user_command = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
WHEN 'REF'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'MANSI'
txt1 = 'CREATED BY'
txt2 = SY-UNAME
TXT3 = ' '
TXT4 = ' '
endcase.
Hope it helps you
Regrds
Mansi -
Hi All,
How to find Function Group for already defined Function Modules.
Regards,>
Venkat Reddy wrote:
> Hi,
> In addition to jayant, and MxG i will tell you one more way to
> find the function group of a particular function group.
> Give your function module name in SE37 and just press(Ctrl+f5) its a key for
> copy where the function group will be display for your function module.
> I think mine is simple
>
> Cheers!!
> VEnk@
Ctrl-f5 is the same as'Display object list Button' from Jayant Sahu. What's funny, is that I only found this out this year and I've been doing SAP for over ten years...! -
How to create function module for getting customer name
Hi Experts,
How to create function module? when in import parameter kunnr values to be passed it must give name1 details according to the customer number...
how to write the logic in source code....
Regards,
Thiru. R1. First of all create function group.
2. Create function module using this function group.
3. If only one kunnr is needed at a time, create import parameter for it. But if many kunnr to be entered at a time,use table.
4. Fetch name1 for each kunnr from KNA1 table.
"->> if many kunnr
if not t_kunnr[] is initial.
select kunnr as kunnr name1 as name1
into table t_kunnr_name1
from kna1
for all entried in table t_kunnr
where kunnr = t_kunnr-kunnr.
endif.
sort t_kunnr_name1 by kunnr name1.
delete adjacent duplicates from t_kunnr_name1 comparing kunnr name1.
table t_kunnr_name1 will contain kunnr and its name1.
I hope logic is clear for you now.
Regards,
Aparna -
How to create function module in abap for VirtualProvider in bi
how to create function module in abap for VirtualProvider in bi ???????????????
can any one help me with simple example ?????????????????
Moderator message : Duplicate post locked. Read forum rules before posting.
Edited by: Vinod Kumar on Jun 15, 2011 4:40 PMHi ,
Thanks for replies about my question??.
If i am using the exit in my char relation ship how can i debugg that exit???
if i am using BPS0 how to do it???If i am using BPS_WB how to do it??
Case1.Variable (type Exit) I known how to do debugg this one in BPS0 but i'm not sure in BPS_WB??
Case2:Char Relation Ship(Type Exit) how to do in BPS0 and BPS_WB??.
Thanks. -
HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM
PLEASE ANYONE TELL ME, ABOUT HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM. IT IS VERY URGENT!!!!!!!!!1
Hi,
Under Global Definitions, we have 'Form Routines' tab. Under this tab, u can have a dynamic subroutine call. With in FORM and ENDFORM, you can call the Function Module.With in the Program Lines editor, u can define the subroutine........PERFORM.
If helpful, reward points.
Rgds,
CK -
How to Use Function Module READ_TEXT
Hi
Anyone give me code or link or example for how to use function module READ_TEXT
and what are the parameters which we have to pass in module.
Regards.
MohsinHi,
refer the given below code.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = 'KOPF'uF0E0 these details we will get thru transaction , where we enter these details.
language = 'EN'uF0E0 these details we will get thru transaction , where we enter these details.
name = TNAME "table name
object = 'AUFK' " these details we will get thru transaction , where we enter these details.
* ARCHIVE_HANDLE = 0
* LOCAL_CAT = ' '
IMPORTING
HEADER = HTEXT
tables
lines = LTEXT
* EXCEPTIONS
* ID = 1
* LANGUAGE = 2
* NAME = 3
* NOT_FOUND = 4
* OBJECT = 5
* REFERENCE_CHECK = 6
* WRONG_ACCESS_TO_ARCHIVE = 7
* OTHERS = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Arun -
How to use functional module " DETERMINE_DUE_DATE"
Hi All,
Can anyone suggest how to use functional module " DETERMINE_DUE_DATE" as it is used in an FI transaction code "FBL5N" and i have to use it in my zprogram to capture the net due date..please suggest..
Regards,
Shanuhi,
CALL FUNCTION 'DETERMINE_DUE_DATE'
EXPORTING
I_FAEDE = LS_FAEDE
IMPORTING
E_FAEDE = LS_FAEDE
EXCEPTIONS
OTHERS = 1 -
How to assign function module with process code in IDOC ?
how to assign function module with process code in IDOC ? and what code i have to write in that function module for custom IDOC ?
helpful answer will be rewarded?Hi,
First goto transaction we42 -->editing mode --> new entries -->give name of your process code and description --> processing with alv service and function module -->then press enter -->after that enter the name of the function module you want to associate from the drop down and save it.
Thats the way to assign function module with process code.
In that process code we will have the Function modules and Bapi's which will take the data which we are sending through IDOC and then process it.
for example: i am triggering the IDOC for every purchase order created then this process code in the receiver system will take the data which i have enetered in the sender system to create the purchase order and process it and creates the same purchase order in the receiver's system.
Reward if helpful.
with regards,
Syed
Maybe you are looking for
-
Aperture crashes on start up - after migrating from time machine
Aperture has been running fine for ages, but at the suggestion of the apple store ,to assess a problem with the isight, I did a clean install of OSX leopard and migrated all the data from the time machine. Now Aperture will not open at all and Final
-
Premiere Elements 8 Project Won't Open. Please Help.
Hello, I was working on a Premiere Elements 8 project for my video class last night (HDV, 1080i 30p) and the program stopped responding as I was importing a clip. I was prompted to wait for response or close the program. I closed the program and when
-
Default PDF viewer in Safari... removing Adobe Reader
I recently installed Adobe Reader because I find it easier to mark-up documents than in Preview, and now it is the default viewer in Safari. I have tried to change this, but the help I have found on the internet isn't working... there is no internet
-
Pal vs. Ntsc with mpeg 1 format
This may be a long question.... I have several small videos that i shot on a point and shoot, Sony dsc w80, that i want to edit in final cut. i am assuming that they are standard ntsc for they are recorded at 30fps, 640 x 480. I will also be using ot
-
Using adapter from MUVO for Ze
Hello, It's maybe an easy question for some of you. But I have a MUVO switching adapter with output 5V - ,5A Can I use this adapter to charge my ZEN V mp3 player? What is the output from the Zen Power adapter? Thanks in advance.