How To Find Games Shown in Commercials

Where can I find out what games appear in iPod commercials? There is a page in the App Store labeled "Games from the TV ad," but it does not list the names of the games shown in the picture at the top. (Not too useful to see picts of the games without their names.) I'd like to know what all four of those games shown are. Also, the games in this commercial: http://www.youtube.com/watch?v=c6WX7XGcRhk. There are several games in this one that I'd like to check out. All I can find on the Apple site is the current commercial. Is there an archive on the Apple site or somewhere else that lists all the games shown in all the older commercials? I sure can't find it.

Thanks. I've seen those. In fact, that page has a link to the App Store page I was asking about. Pictures of the games but no names. And it's the older commercials I can't find. They must be on the Apple site somewhere, but all I can find are the current commercials.

Similar Messages

  • TS2771 how do i find games for ipod 1st generation everything says I need upgrade?

    How do I find games for ipod touch 1st gen?

    You will just have to search for game that interests you and then see the Requirements section to see if it is compatible with the 1G with iOS 3.1.3..
    I know no easy way.

  • How do I find games for my ipod classic 5th gen in the itunes store? Or do they not sell them anymore?

    I have looked all over but can't find any games for my ipod. Some older questions from 2010 say that it's under the apps list. Well it's not there anymore. I'm starting to think they don't sell the games anymore.  I would love it if somone could tell me for sure, or how to find them. Thank you.

    Hi
    I have been looking also for games for the ipod classic.  You would have thought they would still them since they still sell the ipod classic.
    Apple need to update the help guide as it still states how to look for games

  • How do I find games for my IPOD Classic?

    How do I find games for my IPOD Classic?

    Apple removed the clickwheel games from the iTunes Store about a year ago now, so they are no longer available.  Sorry.
    B-rock

  • How can I find games for the old iPad

    How can I find games for. The old iPad?

    You'll just have to look through the iTunes Store for games that interest you and see if they're compatible with the iPad 1. There's no compendium that I know of that list compatibility with specific models of iPad. Few games at this point probably will not be compatible, but there may be a few that require the higher resolution of the new iPad or the faster processor of the new iPad or iPad 2.
    Regards.

  • How to find more game apps more than 300?

    How do I find games more than 300 in the App Store in a category.

    I want generic solution not for specific fields.
    Thanks,
    Mallick

  • How do I find games for iPod 5.5 80GB in the iTunes Store?

    How do I find games for iPod 5.5 80GB in the iTunes Store?

    The german iTunes Support has informed me that I am also under the Apps matching games for my iPod 5.5 80GB.

  • How do I find games for ipod nano 3rd generation

    I cannot find games for iPod nano in iTunes even though all the support keeps telling me to select iPod nano from the Source list. There is no source list, no games tab, nothing that leads me to the iPod nano games. When I click on apps, and just go to a game, they are all just for iphones, ipads or ipod touches. This is frustrating. Any help would be appreciated!

    I believe that a few really low quality iPod games were distributed as freeware a long time ago, however you're much more likely to find malware infested web sites than any genuine source if you go hunting for them, and you'll still be disapointed with what you find. If you want games get an iPod touch.
    tt2

  • How to find total number of records in a BDoc?

    Dear all,
    I have replicated about BP 1088 records from ISU into CRM system with block size 100. Technically on SMW01, for each successfully processed BDoc, there will be 100 records (corresponds to 100 block size). But due to some failed BDocs, not all "successfully" BDocs will have 100 records each, some may have only 1 record inside...or 30...or 88 for example. So, may i know how to find or is there a report i can look into to find the total number of records clearly shown for each of the successfully processed green status BDocs???
    Please help and points will be rewards!!
    Thank You
    Best Regards,
    CK

    I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
    Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
    SQL> create table emp_crap as select * from emp where 1 = 2;
    Table created.
    SQL> declare
      2   v_cnt     number := 0;
      3   zero_rows         exception;
      4  begin
      5    for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
      6     loop
      7        if v_cnt = 0 then
      8           v_cnt := rec.rn;
      9        end if;
    10     end loop;
    11     if v_cnt = 0 then
    12        raise zero_rows;
    13     end if;
    14   exception
    15    when zero_rows then
    16      dbms_output.put_line('No rows');
    17   end;
    18  /
    No rows
    PL/SQL procedure successfully completed.
    -- Now, let us use the table, which has the data
    SQL> declare
      2   v_cnt     number := 0;
      3   zero_rows         exception;
      4  begin
      5    for rec in (select * from
      6          (select rownum rn, e.ename from emp e)
      7          order by 1 desc)
      8     loop
      9        if v_cnt = 0 then
    10           v_cnt := rec.rn;
    11           dbms_output.put_line(v_cnt);
    12        end if;
    13     end loop;
    14     if v_cnt = 0 then
    15        raise zero_rows;
    16     end if;
    17   exception
    18    when zero_rows then
    19      dbms_output.put_line('No rows');
    20   end;
    21  /
    14
    PL/SQL procedure successfully completed.Thx,
    Sri

  • How to find the open PR in SAP

    how to find the open PR list in SAP

    HI,
    Using T-code ME5A - List Display of Purchase Requisitions and give input data's are as follows.
    Plant                :  _______
    Scope of List  : ALV
    Tick Mark of the below options :
           Assign Purchase Requisition to be tick
           "Partial Ordered" Requisitions to be tick
            Released Requisitions Only to be tick
            Requisition for overall Release to be tick
    After that, execute the report shown only released and Open  purchase requisition(PR) details.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • How to find the particular record in 1000's of workflow jobs are running

    Hi,
    In a data manager -> in workflow tab>IF a record is in CHECK-OUT MODE there are 1000's of jobs are running in that workflow tab. Can anyone tell me how to find that particular record in that workflow jobs.
    Can anyone show me the difference in getting a record in 5.5 and 7.1

    Hello COTI
    Unfortunatly, SAP MDM doesn't have good ability for  WF search.
    All WF clarify by it's status (unlaunched, avialable, Received, complited, error  etc.)
    For each WF SAP MDM assing unique Job ID and this id will be shown in Job ID field in Data Manager WF Tab.
    You can change WF list order by all WF fields like as Job ID, Step, User, Start etc. and try to find your's WF.
    You can use Java API - this is one of the best solution for WF management and WF mass upload  (for example)
    Regards
    Kanstantsin Chernichenka

  • How to find out which keywords were used to create a smart album?

    Hi,
    I actually have 2 questions;
    a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
    b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
    Any clues?
    Thanks guys,
    Raphael
    <Edited by Host>

    b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
    Any clues?
    Raphael,
    that message may occur for four reasons at least:
    Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
    Apple Support Communities Terms of Use
    Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
    Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
    Or it is one  of the unexplained problems with the forum software right now.
    a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
    I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
    Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders.  In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
    My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
    I use the search field in HUD a lot, to filter the set of keywords shown.

  • How to find out if two JComponents overlap?

    I wanted to create very simple game, another version of arcanoid (or krakout) where player tries to hit bouncing ball with paddle so the ball will break the wall made of small bricks. so far came up with an idea that paddle will be JComponent controlled by mouse, ball will be also JComponent controlled by mouse and after a while got it ready and coded. before i'll go to bricks (which i'm also planning to do as JComponents :) i wanted to know
    - how to find out when the paddle and the bouncing ball hit each other and if theres any method that returns boolean (or sth..) when any part of those components overlap so i can change the direction of the ball and take particular bricks off the screen (or will have to do it manually somehow..)?
    - also wanted to know if my thinking is correct and douing it with separate classes, having the ball as a thread (changing its .location(..) on the way to move the ball) ,and controlling paddle (another class) just by MouseMotionListener is correct way to do it or there is some other standard aproach to that kind of a program
    - how to control if mouse is leaving particular JPanel so i can have user stopped before and keep him inside of that Jpanel, unless he will press particular button or do something
    thanks in advance for any help and sorry for probably quite confuzing explanation

    Well, yes, because this solution uses the bounds of the JComponent. If you want more complicated shapes, you could define a polygon for instance (java.awt.Polygon) and use it's intersects method, but then the other shape would still need to be a rectangle.
    Other options include GeneralPath class and Area class, this would not limit you to rectangles. With the first class you can also draw arbitrary shapes. With the second you can do intersections, unions etc.
    Have a look at http://java.sun.com/docs/books/tutorial/2d/TOC.html#display (Java2d )
    Mind you, this is more complicated!
    Rene'

  • How to find origin of scrolled UITableView

    Hi, I'm using self.view.frame within my tableViewController to get the origin of its UITableView
    If I scroll the table up (i.e. second row is now shown on top of the screen), self.view.frame continues to return an origin of {0,0} instead of {0, -80} even though the table has been scrolled up by 80 pixels (i.e. the height of the first table row)
    Does anyone know how to find out the amount (e.g. 80 pixels or 90 pixels etc..) by which a table is currently scrolled up by the user ?

    Dankeschön, that was the solution.
    I had also figured it out independently and just got here to update the post when I saw your reply. Thanks

  • How to find the user exit for the T-code 'RECN'

    Hi friends,
    I have a requirement as-
    In 'General Data with Fast Entry' tab of tcode 'RECN' there are 2 fields as contract conclusion date and contract end date.
    Now, the requirement is as if entered contract end date is less than contract conclusion date then we have to display a warning message as "contract end date cannot be less than contract conclusion date".
    So, how to find the right user exit to enter the code.
    Plz help me.I will surely reward points.
    Thanks,
    Rishi

    Hi Rishi,
    If User exits and BAdi's are not provided,  then  you will for Enhancement points.
    Procedure:
                     When you are in a particular transaction, Go to System--> status and you find the standard program of that particular screen. Go to SE38 and give that program name, display mode.
    After that you click on the spiral icon there onthe top. Then,
    You go to menu bar, Edit> Enhancement opitons> show implicit enhancement options.
    You will be shown the points where you need to write the code.
    For creating it you will go to Edit >  Enhancement opitons> Create.
    By this you will add some code in the standard programs.
    Reward points if it helps you.
    Cheers,
    Swamy Kunche

Maybe you are looking for