How to find incoming server and outgoing server for iCloud on iTouch 4g?

Thanks in advance.

See the following.
iCloud: Mail server information
Also see my response to your other post. I have no incoming mail server listed for iClould Mail on my iPod and it works fine.

Similar Messages

How to find gr details and invoice status for particular list of purchase

Hi,
how to find gr details and invoice status for particular list of purchase orders.
is there any t.code/report for it??

Hi,
You use t.code:ME2Nand enter PO number,tn Execute.Now you will have PO details .Now in item details get GR details and Invoice details in purchase order history TAB.
In t.code:MIR5, you can see blocked invoice by selection.
Regards,
Biju K

How to fix incoming server for gmail

how do i configure gmail on iphone 4s. it states INCOMING SERVER error and does not allow my gmail access as in past.

Setup Gmail on iOS
Setup Gmail as Exchange on iOS

How to find out CPU and memory usage for an instance?

Hi DBA Gurus,
How to find out CPU usage and memory usage for an instance?
Any information is appreciated!
Thank you!
Robert

you can calculate cpu usage by adding fallowing three factors which you can get from v$sysstat
1. Parse CPU time : This represents the percentage of CPU time spent parsing SQL statements. Parse time CPU can be a strong indication that an application has not been well tuned. High parse time CPU usually indicates that the application may be spending too much time opening and closing cursors or is not using bind variables.
2. Recursive CPU time : Sometimes, to execute a SQL statement issued by a user, the Oracle Server must issue additional statements. Such statements are called recursive calls or recursive SQL statements. For example, if you insert a row into a table that does not have enough space to hold that row, the Oracle Server makes recursive calls to allocate the space dynamically if dictionary managed tablespaces are being used.
Recursive calls are also generated due to the inavailability of dictionary info in the dictionary cache, firing of database triggers, execution of DDL, execution of SQL within PL/SQL blocks, functions or stored procedures and enforcement of referential integrity constraints
3. Other CPU time : This represents the percentage of time spent looking for buffers, fetching rows or index keys, etc. Generally, \"Other\" CPU should represent the highest percentage of CPU time out of the total CPU time used.
total memory used you can calculate adding
total_agrigate_area+sga
memory usage on os level you can know by fallowing commands
vmstat 5 20 depending upon os

How to find the Connection and Security Code for iPad?

I have a Canon ImageRunner 3025 at the office. I want to connect it with my iPad. I've downloaded the Canon Print & Scan App, but the app requires a Connection code and Security code. Where can I find this on the printer?

Hi, thanks for posting! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide dealers who are in your area.

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. How do I fix this?

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
This happens each and every time, on different Wifi networks, in different locations. On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?

Try this DNS server ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch both your browsers to test.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
And here > Wi-Fi: How to troubleshoot Wi-Fi connectivity

How to find out server name in reports9i

hi all
how to find out server name in reports9i
i need the report server name to call a report
thanks
Edited by: vikas singhal on Nov 5, 2008 1:02 AM

You do not need to do anything, if your Report server is on the same machine as the Forms server (which is usually the case) you simply use the url as
/reports/rwservlet?report=myreport' and the server will automatically use the default report server.
then you simply use
web.show_document('/reports/rwservlet?userid=scott/tiger@orcl&report=myreport&desformat=htmlcss&desname=test.html'Tony
Try it now
Edited by: Tony Garabedian on Nov 5, 2008 2:00 PM

HT4864 How do I directly change the incoming mail server for icloud in Mail? It's grayed out.

How do I directly change the incoming mail server for icloud in Mail? It's grayed out.
I ask this because I have suddenly stopped receiving most e-mails in Mail. I've found that my incoming mail server (p01-imap.mail.me.com) is different from what the Apple mail setup assistant recommends (mail.me.com), but I cannot change it because it is grayed out. Any ideas?

I'm afraid that AFAIK you've gone through the card. You could try Support, though I don't know how helpful they are likely to be.
To contact iCloud Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee.

HT204053 how do I change the incoming mail server for iCloud?

How do I change the incoming mail server for iCloud?

I'm having the same issue. It says I need to enter one, but the entire box is greyed out, and I cannot select it to manually change it. I'm so frustrated!!!

How to find the server connected from multiple switched netwtwork

I have one server connected to distrubted switch or acces switch in network .
They were 45 switches in netwrok and need help how to find that server connected switch from Core switch ?
How many mehtodes and process we can use to find that connected physical switch ?
Thanks in advance !!!

It's a bit of a tedious process. but if you ping the IP address of the server from the core switch and then check the ARP entry to get its MAC address, you can then trace the address tables in the switches to find the switch that the server is physically connected to. Once you have the MAC address, you'll have to check the address table in each switch in the path between the core and the server to find it.

How to find sql server backup was taken under compression mode

Hello,
How to find SQL server backup was taken under compression mode ? I have disabled the Compress Mode backup setting but I want to make sure the backup is taken without compression.
Is there a script for that?
Thanks
JK

I have disabled the Compress Mode backup
That is only a default setting, in backup command you can always overwrite it to a different value.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Cockpit- How to find B1i Server Address

Hi,
I am trying to enable Dashboard. It is asking for B1i Server address. I have tried "http://127.0.0.1:8080/B1iXcellerator/exec/ipo/vP.001sap0004.in_HCSX/com.sap.b1i.vplatform.runtime/INB_HT_CALL_SYNC_XPT/INB_HT_CALL_SYNC_XPT.ipo/proc" but it gave me an error message that it is unable to connect. Does anybody know how to find B1i server address?
Thanks.
Abdul...

Abdul,
Instead of using 127.0.0.1 ... try using either the actual B1i Servers IP address or the name of the machine. You can also review the B1iC troubleshooting guide here ...
[Guide Deleted 31 OCT 2011 - Contained Out of Date Information]
Eddy
Edited by: Jason Lax on Oct 31, 2011 10:48 AM

How to find the server hosting office communication ?

Hello
How to find the server hosting office communication ?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hello,
I have:
DG URL Internal;https://OCS.ad.xxxxxx.xxxx.xxx/GroupExpansion/Int/service.asmx;--;
DG URL External;;--;
Quality Metrics URI;;--;
URL Internal From Server;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
URL External From Server;;--;
Voice mail URI;sip:[email protected];opaque=app:voicemail;--;
MRAS Server;;Not Configured;
GAL Status;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
Controlled Phones;TRUE;--;
PC to PC AV Encryption;AV Encryption Enforced;--;
Focus Factory;sip:[email protected];gruu;opaque=app:conf:focusfactory;--;
Telephony Mode;Telephony Mode Disabled;--;
Line;;--;
Line Configured From;Auto Line Configuration;--;
Location Profile;;--;
Local Log Folder;C:\Users\me\tracing;;
MAPI Information;MAPI Status OK;MAPI Status OK;
Inside User Status;TRUE;;
Auto Update Download Started;--;--;
Auto Update Download Completed;--;--;
Last Auto Update Request;--;--;
Pairing State;Communicator cannot connect to your desk phone because the USB cable is not plugged in. Make sure that you connect the cable.;Enabled;
I see my email on the sip line but no server... what do I miss?
Is it by the URL?
Thanks,
Dom

How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
Now I wanted to make it easy for my users I build a Connection Broker: RDCB
All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
the running ones from RDS02.
How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
Thanks in advance.

Hi Robin,
Thanks for your patience.
After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Turn off verizon greeting with incomming and outgoing calls for LG G2

Can anyone tell me how to turn off the Verizon greeting with all incoming and outgoing calls for LG G2

Hi lindapet2!
I would love to assist you with your device settings. First, provide me some additional details as to what you're experiencing. Are you referring to an audible alert or is this a pop-up message you see when making and receiving calls? Please let me know so that I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

How to find incoming server and outgoing server for iCloud on iTouch 4g?

Similar Messages

Maybe you are looking for