How to find Info Source for Export Data source in Data Marts node

Hi
I need to load data from ODS to Info Cube. I created the Export Data source for the ODS. I can see the Export Data Source but in the Data Marts node of Info Source i cannot find the Info Source for the Export Data source i created. I replicated Data sources in the BW source system. I also tried to use Insert Lost Nodes from the Context Menu of the InfoSource node but nothing worked. Please let me know what i need to do to see the Info source in the Data Marts.
Thanks
Padma

In the infosource tab in RSA1 - use settings --> display generated objects
you will be able to see the datamart infosources..

Similar Messages

How to find Info objects for particular filed??

Hi
I hav doubt Can anyone tel me???
My Query s How to find Info objects for particular filed??
For example i hav some table fileds, how to find Info objects for that fields??
Pls explain me detaily
Points wil be given for all answers.
Thanks
Senthil

Hi Senthil ,
You have your field description along with your Field right.
For example:MATNR - Material Number
Now take this description and go to your BW side Tcode:RSA1
1)Search in Modelling >> Infoobjects >> Material Number
Then you get few hits (matches) which have description matched.
For Example: 0material - Material Number
Check for the Length and type match.
You will understand once you get those hits as to which is related to yours.
2)Go to BI content and search in the infoobjects this has all active and inactive objects but this takes a little time (not much though).
3) You have meta data search / simple search also where you can search for the objects with field description as matching criteria.
Hope your doubt is cleared atleast to some extent.
Assign Points if helpful.
Thanks,
Priyanka

How to find Related Tables for the Tcode given.

How to find Related Tables for the Tcode given. (master data)
Thanks in advance.

Hi Sridhar,
Welcome to SDN.
The tables for a given transaction can be seen in the transaction SE80.
First goto SE93.
Give ur Tcode and find the program name.
Now goto SE80. select program in the first dropdown and give the program name in the second box. U can find the list of tables used.
One more way is : use ST05.
and One more is using FM 'get_tables'
Thanks,
Shailaja
Edited by: Shailaja on Jul 11, 2008 12:33 PM

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

How to find table information for a datasource?

Hi,
Can you please tell me how to find table information for a datasource. I am not getting much help from help.sap.
I am trying to find table information for below datasources. We are creating DSO's for the below mentioned datasources, for some we have standard DSO's(0WBS_O06), for others I am trying to create
0CO_OM_NWA_1,
0CO_OM_NWA_2,
0CO_OM_WBS_1,
0CO_OM_WBS_6
Please help me.
Regards,
Bob.

Hi BOB,
Another option to find the table information...
inorder to get the tables names involved in that particular data source follow the below steps.
1) ST05 --> activate the Trace
2) RSA3 --> enter your data source (for ex: 0CO_OM_NWA_1)
3) Execute
4) Now goto ST05 -> deactivate the trace
5) click on Display trace(F7) button
6) Execute
7) It will display the complete SQL trace
8) Now from the Menu "Trace list" --> select "Combined Table Access"
it will display the complete tables list involved in that data source...
From Table name section you can get the list of tables involved in that data source.
I had traced and took the information of tables involved in that data source 0CO_OM_NWA_1
0CO_OM_NWA_1
AFKO     Order header data PP orders
AFVC     Operation within an order
AUFK     Order master data
COSP     CO Object: Cost Totals for External Postings
COSPP     Transfer of the Order in the COSP Table to the Project
COSS     CO Object: Cost Totals for Internal Postings
COSSP     Transfer of the Order COSS Table to the Project
COVREF     Coverage Reference Table: All Processing Blocks
COVRES     Table of Coverage Results
You can follow the same steps and find the tables for the rest.
Regards
KP

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

How to find MATCH count for # in a String

Hi all,
How to find MATCH count for # in a String.
Ex: 6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20
Regards,
Balavardhan.K

>
balavardhan k wrote:
> I have used below syntax to find count but it is not returning the value and SY-SUBRC = 4.
>
>
> Data : l_text type string.
>
> l_text = '6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20'.
>
>
> FIND ALL OCCURRENCES OF '#' IN L_TEXT MATCH COUNT mcnt .
Then it's not a # but possible a horizontal tab-sign.
Do a find on cl_abap_char_utilities=>horizontal_tab instead.
Edited by: Maen Anachronos on Nov 23, 2010 2:48 PM

How to find CUSTOMER EXIT for a Standard SAP program

How to find CUSTOMER EXIT for a Standard SAP program

Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits).

How to find an table for storing the employee salary

hi,
how to find an table for storing employee salary .. In which table those details are stored .. Please reply me.
regards,
kumar

Hi,
You can see the basic salary details from table -pa0008.If you can see the payroll data,then its not stored in transparent table.its in cluster.For viewing that,you can see through transaction code - pc_payresult.
Regards,
Manoj.

How to find Missing Parts for a particular Process Order?

Hi,
How to find Missing Parts for a particular Process Order ?
Is there any function module or Table ??
Thnx in Advance.

Hi prince roy
you can use the T-code = CO24 - Missing Parts Info System
if helpful PLEASE REWARD YOUR POINTS
thanks
chakri

How to find user exit for a perticular screen?

Dear all,
Can some one tell me how to find user exit for a perticular screen?
ex: MC88 screen can we figure out are there any user exit for that screen!!
Regards,
Vj

User exits are built into the Standard SAP code. You just activate them and insert your code into the include programs.
Here is a program that will list the user exits per transaction code. Not perfect, but it may help.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
        trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
      FORM get_data                                                 *
form get_data.
select single * from tstc
              where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
            where pgmid = 'R3TR'
              and object = 'PROG'
              and obj_name = tstc-pgmna.
if sy-subrc ne 0.
    select single * from trdir
             where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir
                     where pname = tstc-pgmna.
      select single * from enlfdir
                     where funcname = tfdir-funcname.
      select single * from tadir
                     where pgmid = 'R3TR'
                       and object = 'FUGR'
                       and obj_name eq enlfdir-area.
    endif.
endif.
select * from tadir into table jtab
             where pgmid = 'R3TR'
               and object = 'SMOD'
               and devclass = tadir-devclass.
select single * from tstct
          where sprsl eq sy-langu
            and tcode eq p_tcode.
endform.
      FORM write_list                                               *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
endif.
endform.
SMOD, is where you can find the system modifications provided by SAP. CMOD is where you will implement them. If you are looking for all the enhancements provided, then go to CMOD, follow the menu, 'Utilities-->SAP Enhancements'. This will take you to a screen where if you just execute it, you will get all the enhancements provided by SAP.
It is always difficult to find a user exit if all you have is a program name or a transaction code, unless you do a program like Rich suggested. But even there, you will not be able to find user exits that are implemented as sub-routines(also called forms not sapscript forms). Most of the user exits are documented under the corresponding task under IMG structure. So use transaction code SPRO, go to the IMG structure, choose the application area that your program or transaction might be and then you should find a task that talks about enhancements. If you execute that task most often it will take you to CMOD and sometimes to SE38. But all you want to know is there in the documentation attached to the task. Then you can go to CMOD and see which components are there.
Regards,
Amey

How to find the Ranges for a field ?

Hello All,
 Can anyone tell me how to find the ranges for a field.
1, i.e say I want the Ranges Structure for the field LIFNR.
 The ranges structure for this is "RANGE_LIFNR".
 This I used in my Program since I know it previously.
 But now I want the ranges structure for the field VBELN (Delivery Document).
 I don't know what is it !!!!!
2, Is there any procedure to know the ranges structure for a particular field ?
Regards,
Deepu.K

Hi Deepu,
Using 'Where used list' you can able to find out RANGES tables.
For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
If you using a program defined as shown below.
DATA: r_vbeln type ranges of vbeln.
The above statement also creates ranges structure in Runtime.
Procedure finding range table structures
go to SE37 -> Enter domain or dataelement value
Go to where used list --> search for 'Structures'
After getting all structure --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
You can get all ranges tables in the search window
If helps plz reward points.
Regards
Bhupal Reddy

How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0?

Hi,
How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0? Please let me know.
Thanks,
Monica

Hi,
In SRM for all objects like SC ( BUS21210),BID,PO(BUS22010),Confirmation (BUS2203),invoice etc all the data stored
in BBP_PDHGP and BBP_PDBEI tables only, These is no separate tables..
for your reference below are the few SRM tables
BBP_PDACC Account Assignment
BBP_PDATT Document Attachment
BBP_PDBEH Backend Specific Header Data
BBP_PDBEI Backend Specific Item Data
BBP_PDBGP Partner Extension Gen. Purchasing Data
BBP_PDBINREL Transaction Object Linkage (EBP)
BBP_PDHCF Set for Tabular Customer and Solution Fields on Hdr
BBP_PDHGP Business Transaction Purchasing Information
BBP_PDHSB Bid Invitation
BBP_PDHSC Header Extension for Customer Fields
BBP_PDHSS Hdr Extension for SAP Internal Enhancements (IBUs and so on)
BBP_PDICF Set for Tabluar Customer and Solution Fields on Itm
BBP_PDIGP Business Transaction Item-Purchasing Information
BBP_PDISB Bid Invitation/Bid-Specific Item Data
BBP_PDISC Item Extension for Customer Fields
BBP_PDISS Item Ext. for SAP Internal Enhancements (IBUs and so on)
BBP_PDLIM Value Limit
BBP_PDORG Purchasing Organizational Unit
BBP_PDPSET Further Procurement Information
BBP_PDTAX Tax
CDCLS Cluster structure for change documents
CDHDR Change document header
CDPOS_STR Additional Change Document - Table for STRINGs
CDPOS_UID Additional Table for Inclusion of TABKEY>70 Characters
CRM_JCDO Change Documents for Status Object (Table JSTO)
CRM_JCDS Change Documents for System/User Statuses (Table JEST)
CRM_JEST Individual Object Status
CRM_JSTO Status Object Information
CRMD_LINK Transaction - Set - Link
CRMD_ORDERADM_H Business Transaction
CRMD_ORDERADM_I Business Transaction Item
CRMD_PARTNER Partners
SROBLROLB Persistent Roles of BOR Objects
SROBLROLC Persistent Roles of Business Classes
SRRELROLES Object Relationship Service: Roles
Thanks & Regards,
Prasad S

How to find Opening Balance for Cash Book

Hello Friends,
I am Creating one Report for Cash Book.(Means : For Perticuler GL Account)
I have no idea how to find Opening Balance for some Perticuler Date.
Ex.
     Current date: 07/06/2007
    and i want to find Opening Balance on 26/05/2007
i have Function for Calculating Opening Balance,
Group No: 3006             Business Object General Ledger Account
BAPI_GL_ACC_EXISTENCECHECK     Check existence of G/L account
BAPI_GL_ACC_GETBALANCE     Closing balance of G/L account for chosen year
BAPI_GL_ACC_GETCURRENTBALANCE Closing balance of G/L acc for curr year
BAPI_GL_ACC_GETPERIODBALANCES Posting period balances for each G/L account
but they show current opening balance, and i want for perticulaer Date..
         How to find Opening Balance for Cash Book
please Help me out
Thanks
Gaurav Tripathi

Hi Maruthi,
   Opening balance for a cutomer for a given period, u need to first find closing balance of that customer in the previous period. For eg. Suppose u want to find opening balance for customer 'A' for month of Nov'06, then U have to find wot was his closing balance in at end of Oct'06. Hope this solves u r problem

How to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for EXIT_SAPL

Hi ,
how to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for EXIT_SAPLRSAP_002 ?
I need to extend the Datasource 0PLANT_ATTR with RSAP0001 in EXIT_SAPLRSAP_002.
In Table ROOSOURCE I do not have an entry for 0PLANT_ATTR.
How can I identify the extractstructure for 0PLANT_ATTR ?
Thanks !!!
Martin

Hi Martin
Go to RSA6 and do a find for Plant attr and from there you will find the extract structure: BIW_T001WS.
You can add the fields here and then using CMOD/Exits you can write the code to populate the data.
Thanks
Kalyan

How to Find Business Objects for any Tranaction .

Hi Abapers,
How to find Business objects for any transcation..... and how to connect the Work flow to any Trancation so that for example any body changes the date of Birth ...... so that the work flow should trigger .
Thanks & Regards
Bhaskar Rao.M

Hi Bhaskar,
For finding business object,you can try transaction SWO4 and by checking the documentation in it you can find your required business object.
Another method is:
1) Go to Trx SWE4 and switch on the event trace.
2) Run your transaction which you want to use for triggering your workflow.
3) Run transaction SWEL and find your Business Object and related event in it.
For connnecting your WF to your transaction you have to create a start event in your WF in SWDD,where in you specify the Business Object and start event which you find using above method.
Eg.You want your WF to be triggered whenever you have an error in your idoc.For this your BO will be IDOCAPPL and your event will be (inputErrorOccurred).This you will give in header data in SWDD.
Neerja

How to find Info Source for Export Data source in Data Marts node

Similar Messages

Maybe you are looking for