How to find key figures not created in a Structure.

After using Where Used on a selection variable Z_FISCPER3_M_SV a list of Key Figures appear. I wish to amended these Key Figures as the selection variable used is incorrect. However, I cannot find these Key Figures in the Structure? Does anyone know how to find Key Figures not created in a Structure.

Thanks for such a quick response.
I am assuming the following about the table :
-     Column u201CCALDAYu201D contains a date value for each day the Index is active.
-     Column u201CBIA_USEDu201D contains a value that is iterated for the given day each time the Index is used.
-     Column u201CBIA_NOTPOSSIBLEu201D contains a value representing how many times a query could not access this Index.
-     Column u201CNO_BIAu201D tells if a BWA Index exists at all on any of my BWA Blades
-     Column u201CBIA_TECHINAu201D ????????
-     Column u201CBIA_INAu201D ???????
-     Column u201CDB_FALLBACKu201D ???????
I am not sure if my understanding of the column is correct. Can you tell me they are? The columns with u201C???????u201D mean I have no solid understanding of how to use these columns at all.
Thanks

Similar Messages

How to filter Key Figures - not using the GUIDs

An example How to filter Key Figures may look like this:
http://XXX.com:8000/sap/bw/BEx?sap-language=DE&bsplanguage=DE&CMD=LDOC&TEMPLATE_ID=XXX&FILTER_IOBJNM=41F68RV4ZB5VYSARODYU70CAQ&FILTER_VALUE=41F68SAI18DB01DO023IR49QA
The GUIDs consume the space in the URl. Is there a way to work with an alias.
To use the technical name of a Key Figure defined in the Query does not work.

Hi Cherie,
This is exactly the type of problem that I'm currently trying to figure out. I'm trying to following your solution but I'm not clear on how you actually achieved this in you last note. I want to dynamically select actuals/budget column fields based on what period I enter. I thought about creating 12 separate RKF fields for actuals and 12 separate RKF fields for the budget reforecast and outputting these all and then doing some VBA to hide the fields not required based on which period was selected... how is your variable ZFYAPER7 defined and calculated?
Cheers

Unable to find key figure attribute in the cube

Hi all of you,
I am struggling while working on this "Display Attribute". Please read this and help me out.
I want to create attributes and then load data into a cube.
I had created an InfoArea IA_ATTRIBUTES.
Under this IA_ATTRIBUTES I created an InfoObject Catalog IOC_DISPATTR.
Under IOC_DISPATTR I created an InfoObject ZCUSTNUMB which is my primary key.
After defining the ZCUSTNUMB I clicked on the Attributes tab and entered the other attributes like ZCUSTNAME, ZCUSTADDR, ZCUSTREGI, ZCUSTLOCA, and ZPRICE. All of these attributes except ZPRICE are characteristics WHILE ZPRICE is a keyfigure.
I've also made sure that the Attributes only check box is not checked for all the characteristics.
I then activated the InfoObject ZCUSTNUMB and came back.
Now I created a cube DISP_ATTR. I clicked on the InfoObject Catalog button and selected the above mentioned catalog IOC_DISPATTR and transferred the IOs from the template into the structure.
Now when I transfer IOs in this way all the IOs both characteristics and key figures should come into the structure of the cube isnt't. But only characteristics have come and the keyfigure ZPRICE hasn't come.
Moreover when I hit on the key figures tab and hit on the find button and find ZPRICE I am getting a message saying "No (further) object found". So when I hit on the create button and create a key figure ZPRICE I am getting a message saying "InfoObject ZPRICE already exists as Key Figure (please rename)".
However when I double click on ZCUSTNUMB which is the primary key, the screen "Display characteristic ZCUSTNUMB: Detail" opens. In this screen I find all the attributes in the attributes tab that I had defined while defining attributes including ZPRICE.
So what I don't understand is when all the characteristics IOs are visible under the characteristics tab then why am I unable to find the key figure ZPRICE under Key figures tab when I created it while defining attributes. Can anyone please explain me this situation and tell me how should I find the key figure ZPRICE so that I can go ahead and create the cube.
Lastly I want to know what are the differences between InfoObjects and Attributes. Is an attribute also an IO?
Please explain.
I would appropriately rewards your answers.
Thank you.
TR.

Hi Oscar Romero,
Thanks a lot for your reply. As per your suggestion I created another IOC FOR key figures called IOC_ATTR_KF. In this IOC I had included the key figure ZPRICE and activated the IOC.
Now I have created a cube again ATTR_DISP. On the right corner where we find 5 buttons I clicked on the InfoObject Catalog button. The screen "Select InfoObject Catalog" opened displaying the IOC_ATTR_KF that I had created earlier. When I double clicked on the IOC_ATTR_KF I got the msg asking "Do you want to transfer the IOs from the template into the structure?" I clicked on Yes. But I don't find any key figures either in the Structure pane or in the Template pane. Both the panes are empty.
I also clicked on the All InfoObjects button and searched for ZPRICE but again I am getting the message "No "further) object found". However when I try to create ZPRICE I am getting the message ZPRICE already exists.
Please explain me why this is happening like this?

How to sort key figures

Hi Gurus,
Thanks in Advance...........
How to sort key figures & Way to find out customers with 0 sales.
Thanks,
Venkat.

Hi Rakesh,
Thanks for your info, i assigned point to you.
any idea on Way to find out customers with 0 sales....
Thanks,
Venkat.

How to find out which user create folder

how to find out which user create folder in shared drive?

Hello,
you have to enable Auditing in on the DCs OU and also on the top folder level where this should be monitored.
http://technet.microsoft.com/en-us/library/cc784387(v=ws.10).aspx
http://support.microsoft.com/kb/310399
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

How to find a user who created message in satelite system ?

hi all,
Does anybody know how to find a user who created message in satelite system, but when there is no business partner created for him in Solman ? In tx crm_dno_monitro, crmd_order or dnotifwl there isn`t any information. Is there any Tx or something where i can check it ?
Regards,
M.

Hi,
BP should ne maintained for the user in satellite system as a identification in solman system.
how you are trying to create a message in satellite system..
if you are using help-> create support message then, you can get the message log details on the table BCOS_PROT.
please update us
Thanks,
Jansi
Edited by: shivjansi on Jan 25, 2012 7:44 PM

How to find when index was created in the database.

Hi,
Please help me, how to find when index was created in the database. It should give with date and time.
Thanks... Bakser

Please help me, how to find when index was created in the database. It should give with date and time.DBA_/ALL/User_objects Created
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
OBJECT_NAME                                        VARCHAR2(128)
SUBOBJECT_NAME                                     VARCHAR2(30)
OBJECT_ID                                          NUMBER
DATA_OBJECT_ID                                     NUMBER
OBJECT_TYPE                                        VARCHAR2(19)
CREATED                                           DATE
LAST_DDL_TIME                                      DATE
TIMESTAMP                                          VARCHAR2(19)
STATUS                                             VARCHAR2(7)
TEMPORARY                                          VARCHAR2(1)
GENERATED                                          VARCHAR2(1)
SECONDARY                                          VARCHAR2(1)
select OBJECT_NAME,TIMESTAMP,CREATED from ALL_OBJECTS where OWNER='OWNERNAME' AND OBJECT_NAME='OBJECT_NAME' AND OBJECT_TYPE='INDEX';Edited by: Anantha on Apr 21, 2009 3:18 PM
Edited by: Anantha on Apr 21, 2009 3:19 PM

Key Figures not showing up in the Query disigner

I added a key figure to a characteristic as an
attribute, but it is not showing up in the Query designer
any idea why
Raj

Hi RajShekhar,
This KF that you have added as an attribute to a char will not be available in the Key Figure section. Open the dimensions and find the char for which you created this attribute. Open up the attributes under it and you should find the KF. If you need to use this KF value in a calculation, then you will need to create a formula variable to pull in its value.
Hope this helps...

How to block key figure value input in DP?

Hello everyone!!
I need to create a way to block the input of value in some key figures in some planning books in DP.
I tried to create a macro to block cell input - CELL_INPUT(XXX) = 0 - , but unfortunately it doens´t work, because I have another macro (default) that keeps one cell of the entire row opened to the user insert the values.
I can not put the "closing" macro as an interactive macro in the planning book, because, only one user is able to execute the macros, not all of them. And I also can not take off the other macro from the default event or change in the design mode of the planning book.
Does anybody know´s another way to do it?
Thanks a lot!!
Regards
Angela

Hello Visu
It´s not possible to create another planning book. They will have to use the same. But I have another solution. I´ll create this macro to block the values input in the determined row to be executed only for one user. This user will be the administrator, and only he would be able to execute this macro to block the other users.
But I have one doubt, how can I set the macro to be execute only by this user using the USER( ) function? The way I did it´s locking only this user, and it has to block all the others. The function user will be used only for the administrator.
The macro is like this:
IF
    USER ( 'AAA') = 1
    Line XXX (Attributes) =
        ROW_INPUT( 0 )
ENDIF
Best Regards
Angela
Edited by: Angela Christina Martelli on Mar 26, 2009 4:49 PM

How to Filter Key Figures in Columns Based on a Selection

Hello,
I am trying to get my columns to dynamically filter based on some selection and would like to know what is the easiest way to make this happen. My scenario involves displaying 12 months of data for an actual / budget view. So we may need 8 months of actuals and 4 months of plan, 9 months of actuals and 3 months of plan, 10 months of actuals and 2 months of plan, etc. The row is cost element and my columns are restricted key figures. I want the user to be able to easily select an 8/4 look and the dynamically remove the unnecessary columns. Same with a 9/3 or a 10/2. Besides these 12 months of Act / Bud, I have 12 months of plan, 12 months of actuals for other years, so I have lots of key figures. Just doing the basic filter can be too cumbersome.
Thanks,
Cherie

Hi Cherie,
This is exactly the type of problem that I'm currently trying to figure out. I'm trying to following your solution but I'm not clear on how you actually achieved this in you last note. I want to dynamically select actuals/budget column fields based on what period I enter. I thought about creating 12 separate RKF fields for actuals and 12 separate RKF fields for the budget reforecast and outputting these all and then doing some VBA to hide the fields not required based on which period was selected... how is your variable ZFYAPER7 defined and calculated?
Cheers

Dynamic Texts from Bex ( for Key Figures ) not coming to WEBI Query

Hi Gurus,
We have a Query in BEx : Each Key figure column text changes dynamically - Like based on Present month
it will Display Month +1 Month +2 up to Month +12. Used dynamic Text variables .
But when i created the universe and Webi report , i am missing the text in the column for Key figures .
How should i get the column text in Webi which is same as in Bex : Points will be awarded for helpful
answers.
Thanks
Magge

Hi,
text variables with replacement path are supported in BO4.0, see following document: SAP BusinessObjects BI4 - Supported BEx Query Elements
As an example after entering 2012 in the prompts window, the name of the corresponding key figure will dynamically change:
After refreshing and selecting 2013, the column name will update:
Im not sure though if this is the case with unv universe access to BEx queries.
Best regards,
Victor

How to reference Key figure in (BAdI) IF_EX_RSR_OLAP_BADI~COMPUTE method?

Hi,
I am a new bee to the ABAP world.
I am writing a BAdI implementation (Definition name: RSR_OLAP_BADI) for a 'Virtual KeyFigure' named D_TAX1.
I dont know how to set the value for key figure D_TAX1 in BADI implementation COMPUTE method (IF_EX_RSR_OLAP_BADI~COMPUTE).
D_TAX1 is a virttual key figure I had added in DSO.
I want to populate the value in BADI compute method (IF_EX_RSR_OLAP_BADI~COMPUTE).
I haven't written any method implementation for IF_EX_RSR_OLAP_BADI~DEFINE.
Is it mandatory that I need to write some thing there? I haven't declared any attributes either.
I want to set tax amount to the D_TAX1 virtual key figure based on the amount (another key figure in DSO).
I don't know if I need to write this, but the class name in BAdI is: : ZCL_IM_VAL_IMPL.
I really appreciate your help in this matter.
Thank you.
Sekhar

Thank you for your answers.
I have added the following code to the methods DEFINE, INITIALIZE & COMPUTE methods.
method IF_EX_RSR_OLAP_BADI~DEFINE.
DATA: l_s_chanm TYPE rrke_s_chanm,
      l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
      <l_s_chanm> TYPE rrke_s_chanm.
Insert Code
CASE i_s_rkb1d-infocube.
WHEN 'D_DSOIC1'.                                "DSO name
    l_s_chanm-chanm = 'D_CST1'.              "Characteristic
    l_s_chanm-mode = rrke_c_mode-read.
    APPEND l_s_chanm TO c_t_chanm.
    APPEND 'D_TAX1' TO c_t_kyfnm.          "D_TAX1 is a newly added Virtual KeyFigure
ENDCASE.
ENDMETHOD. "if_ex_rsr_olap_badi~define
[In the following INITIALIZE method, I didn't change any thing. I used the INITIALIZE method from the CL_EXM_IM_RSR_OLAP_BADI as is]
method IF_EX_RSR_OLAP_BADI~INITIALIZE.
DATA: l_global_name TYPE string.
FIELD-SYMBOLS:
        <l_global>    TYPE i,
        <l_s_sfc>     TYPE rrkg_s_sfc,
        <l_s_sfk>     TYPE rrkg_s_sfk.
there's no need to change this method
Just create attributes for each charactersitic
with name P_CHA_<characteristic> TYPE i.
and constants for each key figure with name
P_KYF_<key figure> TYPE i.
CLASS cl_exm_im_rsr_olap_badi DEFINITION LOAD.
get field postions for characteristics in structure
LOOP AT i_th_sfc ASSIGNING <l_s_sfc>
       WHERE user_exit NE rrke_c_mode-none.
field name in structure is keyreturnnm
name of the global variable
    CONCATENATE 'P_CHA' <l_s_sfc>-chanm
        INTO l_global_name
        SEPARATED BY '_'.
fill the global variable
    UNASSIGN <l_global>.
    ASSIGN (l_global_name) TO <l_global>.
    CHECK <l_global> IS ASSIGNED.
    <l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
                                       i_fieldnm = <l_s_sfc>-keyreturnnm
                                       i_s_data = i_s_data ).
ENDLOOP.
get field positions for key figures in structure
LOOP AT i_th_sfk ASSIGNING <l_s_sfk>
       WHERE value_returnnm IS NOT INITIAL.
name of the global variable
    CONCATENATE 'P_KYF' <l_s_sfk>-kyfnm
        INTO l_global_name
        SEPARATED BY '_'.
fill the global variable
    UNASSIGN <l_global>.
    ASSIGN (l_global_name) TO <l_global>.
    CHECK <l_global> IS ASSIGNED.
    <l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
                                       i_fieldnm = <l_s_sfk>-value_returnnm
                                       i_s_data = i_s_data ).
ENDLOOP.
endmethod.
METHOD if_ex_rsr_olap_badi~compute.
FIELD-SYMBOLS <fs_d_tax1> TYPE ANY.
FIELD-SYMBOLS <fs_d_cst1> TYPE ANY.
ASSIGN COMPONENT p_kyf_d_tax1 OF STRUCTURE c_s_data TO <fs_d_tax1>.
ASSIGN COMPONENT p_cha_d_cst1 OF STRUCTURE c_s_data TO <fs_d_cst1>.
<fs_d_tax1> = 10.
ENDMETHOD.
When I display the virtual key figure D_TAX1 in the query, it is not populated with value 10.
Can you guys please tell me what I need to change?
I haven't written any code in GET_FIELD_POSITION_D (in the example class CL_EXM_IM_RSR_OLAP_BADI, this method is implemented).
I appreciate your suggestions and help.
Thank you,
Sekhar

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Disaggregation of Key figure not in proportion at monthly bucket

Dear Expert,
Please find the below case.
Here Key figure 2 is disaggregated based on Key figure 1 (Calculation Type P) also we maintained Time based disaggregation K.
The issue is - if you check total, it is 13 for both key figures as shown in below screen shot.
But region wise (Detail level) if you checked, it is not in 1:1 proportion and it is causing problem for us.
For example Region 2 having value in KF1 as 2 for Week 11.2015 but after disaggregation it got nothing on KF2.
(The reason is Key figure 2 is having value in week 12 and week 13 and nothing in Week 11)
We tried 2 different approach to get 1:1 proportion in Monthly bucket, but it could solve our problem.
Approach 1-After Key figure2 calculated in Weekly bucket, Reset Key figure 2 at total level in Monthly data View and enter the Total of Key figure 2 at Total level in Monthly bucket.Check the result at detailed level.
But in this case it is calculated for week 10, 11, 12 and 13 as 0, 9, 3, 1. (We want Key figure2 as per original calculation i.e it should be 12 and 1 in week 12 and 13 respectively)
Approach2 -
Approach 2 - Add another New Key figure as Key figure 1 Total- which sum the Key figure1 at detailed unit at Month level and then disaggregation of Key figure2 based on this new KF.
Its working for this scenario but different scenario is not working.
For example- here region 3 and 4 affected.
If disaggregation at Month level is corrected, our issue will be resolve.
Waiting for your feed back.
Thank you
Sachin

Hi,
In Planning Area u2013 Key Figure settings, did you try to use u2018N - No disaggregation in timeu2019 for KF2 key figure ?
This will mean that copying will occur in technical periods of the storage bucket profile and not the way it happens now.
Other option:
Now, you storage bucket profile and also the planning bucket proifile are in Days/Weeks/ .Months
Is it necessary for your user to view data in daily buckets ? Can the user view the data in weekly buckets only (and not in daily buckets) ?
Your planning bucket profile can be in Weeks/..Months .
This way your displayed data will be in weekly buckets.
Regards
Datta

Retractor for Statistical Key Figures Not Sending Values

I have configured the standard retractor for primary costs and stat key figures based on all the documentation. Primary costs retract perfectly. Stat Key Figures do not send over the values.
I have configured UPBR_RETRACT with UPB_RET_STKEYFIG. In the update rules the only thing I have changed is assigned ZRATENU to 0BPS_PRICE and 0QUANTITY to 0BPS_QUANTITY. I copied the delivered planning level 4EXP0004 to a Z level assigned to my custom cube. In UPBR_STRUCT I assigned to the correct structures /1SEM/_YS_CHAS_210ZEXP0004 and /1SEM/_YS_KYFS_210ZEXP0004.
From BPS, when I run the retractor I get the message that "Retraction: Update completed without errors. Number of records:   56". All of this tells me things are running fine. My parameter group is setup as follows:
Retr. R/3 Comp.          6
Retractor Control          3
Delta Update          0
Destination          DE1CLNT209
Test mode Is Active          0
I go over to ECC and look at KP46. The stat key figures by cost center have been transferred but the planned values all show 0. When I go to table COSR, I see 0 in the planned fields.
Has anyone had this issue and do they know how to solve it?
Thanks,
Cherie

Dear Chrie,
Can u explain, what are the keyfigures that are not getting retracted to R/3?
If quantities and Unit of measure is not getting retracted, you will have to apply the note 889634. Check once.
If you are using the function modules UPR_COST_PLAN_INIT and UPR_COST_PLAN_EXECUTE, then make sure that you pass only Object Currency (0AMOCCC) values to it, as it supports only those.
Regards,
Srinivas Kamireddy.

How to find key figures not created in a Structure.

Similar Messages

Maybe you are looking for