How to find licence number to activate software ?

I have just bought the Adobe creative Cloud for enterprise.
I had download the creative cloud and now each software is asking for a licence number but I can't find it.
And I have no acces to Adobe Licensing website to get one.
Can you help me?
Thanks.

Hi Berengere,
Welcome on the Adobe Forums!
There is no serial number needed to activate the Creative Cloud, the Adobe ID will be used to activate the product.
As the product mentioned is Cloud for Enterprise, you have to verify first if your Adobe ID (email address) has been assigned to the user rights.
You will find more information in the following link: http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html
If you have already proceeded the the previous steps, please try the steps below then:
1. Clean Up cached user login information
Close the Creative Cloud application.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE
Delete the opm.db file.
Launch Creative Cloud.
2. Reset the Hosts file
Windows
Choose Start > Run, type %systemroot% \system32\drivers\etc, and then press Enter.
Right-click the hosts file and select Open. Select Notepad for the application to open the hosts file.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Mac OS
Log in as an administrator to edit the hosts file in Mac OS.
In a Finder window, choose Go > Go To Folder.Type /etc.
Select the hosts file and open it.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Please, let us know how it goes.
Thank you.
Arnaud.

Similar Messages

How to find the number of references created for a given object ??

How to find the number of references created for a given object in a big application environment.
That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??

Please do not post the same question multiple times.
As for your original question, there is no direct way to do it.
Especially not the way you phrased it,
since objects don't have "names".
Applications also don't have "names".
They have classes and instances.
Also, there are 2 related issues, and I'm not sure which one is the one you asked.
#1. Finding the number of references to the same object.
Eg.
Map<String,String> a = new HashMap<String,String>();
Map<String,String> b = new HashMap<String,String>();
Map<String,String> c = a;In this case, there are only 2 objects.
The first object has (at least) 2 references pointing to it.
The second object has (at least) 1 reference pointing to it.
(There may be more, if the HashMap library keeps
references to these things, or if the HashMap object has
some internal cyclic references...)
If you're asking this, then it can't be done.
It's an active research topic in universities
and software research labs, called "alias analysis".
Type it in google, and you'll see people are working hard
and having little success so far.
#2. Finding the number of instances created from a class.
In this case, what you have to do is to add a counter to
the constructor of the class. Every time an object is constructed,
you increment the counter. Like this:
 class MyClass
 public static int counter = 0;
 public MyClass( ) { counter++; }
 // Then later in your program, you can do this:
 MyClass a = new MyClass();
 MyClass b = new MyClass();
 System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
For every class you care about, you have to modify its constructor.
Also: when an object is deleted, you won't always know it
(and thus you won't always be able to decrement the counter).
Finalizers cannot always work (read Joshua Bloch's
"Effective Java" book if you don't believe me), but basically
(1) finalizers will not always be called, and
(2) finalizers can sometimes cause objects to not be deleted,
and thus the JVM will run out of memory and crash

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to Find PO Number after Importing PO through Interface Table

Hello All,
I am Importing PO through an Interface. now I wanted to find PO Number(Segment1) which has been created.
Please tell how to find PO Number....?
Thanks in Advance
Regards
Ravi Raj.

Got Answer

How to find the number of links in a website

hi every body
can any one clear my doubt
my doubt is that
in a website how to find the number of links the hole website contains
is there any navigation tool to find that
plz help me yar
i am waiting for the reply

If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
Hope this helps.

How to find port number , when there will be different instance number ?

In case of portal url,
port number is 50000 for default instance number 00.
how to find port number , when there will be different instance number , instead of 00?
Thanks

Hi
You can find the port number by your instance number as follows:
There is a general format for the port number like you have mentioned.
For 00 instance the port number is 50000.
The general format for the port number goes like this:
5<instance_no>00
If your instance number is 01 then the port number would be 50100.
It depends on the installation type which you perform.
You can also change the instance number during the installation but normally you dont do this.
If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
Hope this solves your doubt.
If you need some more clarification please lemme know.
Regards
Sumit Jain
**Rewrd with points if useful.

How to find the number of times method being called.....

hi,
can any one pls tell me how to find the number of times the method being called......herez the example....
Refrence ref = new Refrence();
for(int i = 0;i < arr.length; i++){
if(somecondition){
ref.getMethod();
here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

can any one pls tell me how to find the number of times the method being called......
herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

How to find Negative number

can any one pls tell me how to find negative number ?
Thanks

1. One easy method is to look for the giveaway dash in front of the number, e.g. "-1" is a negative number, given the "-" instead of the "1."
2. Negative numbers can also sneakily be found by multiplying i by itself: i^2^ is a negative number.
3. Negative numbers can hide in the exponent of e as complex numbers. e.g. e^i*pi^ is a negative number.
4. If we're referring to Java here, perhaps the following could be of some use:
final int ZERO = 0;
public static void main(String[] args) {
int a = 3;
int b = -13;
System.out.println(a + " is negative? " + lessThanZero(a));
System.out.println(b + " is negative? " + lessThanZero(b));
boolean lessThanZero(int n) {
return n < 0;
}

How to find the number of occurance of a string in text field of Infopath form?

Hi All,
In Infopath text field, How to find the number of occurrence of a particular string in that field?
Thanks in advance!

You can check to see if it contains a string once by using the contains function, but there isn't a very clean way to do what you want. If you wanted to guess at the maximum number of occurrences, then you could:
Box A has your initial. Set Box B to do a concat of string-before and string-after of Box A where it copies Box A minus the string we're looking for. Then we have Box C that does the same thing to Box B. Repeat as many times as you see necessary.
Example:
String: "1"
Box A - "123451234512345"
Box B - "23451234512345"
Box C - "2345234512345"
Box D - "234523452345"
etc.
We then have a field that has nested ifs looking backwards from Z -> A looking for a non-blank. Based on that, we return the number of occurrences. Again, this isn't clean, but it will work if you think there's a predefinable maximum.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

How to find next number range for project definition in tcode CJ20N

Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.

Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

How to find the number simultaneous call at a given moment on UCCX ?

Hello,
I would to know how to find the number simultaneous call at a given moment on UCCX ?
it's on UCCX or UCCX RTMT, I don't know thanks a lot for your help.
Aubert

Hi Gergely,
I should made a report on the number simultaneous call at a given moment on UCC on the server (all calls on the server)..

How to Find the number of Databases in a server.

HI,
Please tell me how to find the number of Databases are in a server . when the DB is not up.
ps -ef | grep ora_
This i know whether our DB is up or not. But i want to know how many databases are in a server .If the database is down .
Cheers,
Gobi.

Hi,
[oracle@oralinux admin]$ lsnrctl status
LSNRCTL for Linux: Version 9.2.0.4.0 - Production on 01-DEC-2006 16:25:41
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-01169: The listener has not recognized the password
[oracle@oralinux admin]$
Plz give me the solution.
Cheers ,
Gobi.

How to find licence number to activate software ?

Similar Messages

Maybe you are looking for