How to find list of standard sap exits are there in BW
HI ALL,
Please tell me how can i find list of sap exits in BW
Thanks in Advance.
Hi,
Refer this link, it will give you entire list + how to get the list:
http://www.easymarketplace.de/userexit.php
Hope this helps.
Thanks,
Rahul
Similar Messages
-
How to find list of languages installed in the SAP system?
Hi All,
Please tell me, how to find list of languages installed in the SAP system?
Thanks and Regards,
Kumar.Hi Virgo Rhyme
Hope the following info will be helpful
3rd - SAP is the 3rd largest software company in the world
30,000 - Total number of people employed by SAP
5,400 - Number of programmers employed by SAP
$7.024 billion - FY03 Revenue
$1.077 million - FY03 Net Income
12,000 - Number of companies using SAP
79,800 - Number of SAP installations
12,000,000 - Number of people using SAP
120,000,000 - Total number of people in the 12,000 companies who are using SAP
28 - Number of languages supported by SAP
46 - Number of country-specific versions of SAP
22 - Number of industry-specific versions of SAP
1,000 - Number of pre-defined best practices contained in the SAP system
10,000 - Number of tables requiring configuration in a full SAP implementation
55,000 - Number of SAP experienced consultants worldwide
28 - Number of years ago SAP was started
Reward if helpful
Regards
Lakshman -
How do we find tables for standard SAP programs?
Dear Friends!
I have received a project in which I have to create a report on the employees skill-sets(qualifications). Qualifications we can see in in the Transaction PA30 in the form of infotypes. But infotype tables are not sufficient itself. So do you guys have any idea that where else do we maintain records like this moreover how do we find tables in standard SAP Programs.
Please reply!!Whats up Guys...??
Gave up??
I have found a table for position but not really for Qualifications.. (Not in terms of Infotypes..)
Tables ARE
HRPY_WPBP
- PERNR
- PLANS
T528T
- PLANS
- PLSTX
See if you guys can do something more about it. -
How to find out the standard info stucture for a customized IS in LIS
Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
SaddyHi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy -
How to find list and cost price in MM module
Hi
Can any one help me in how to find List and cost price in MM module for pricing.
thank you.
Davidhi Saquib Khan
Many thanks Saquib Khan for ur reply. Actually iam trying to create a report which displays material number, material description, plant, product hierarchy, cost and list price, based on the selection criteria of a range of materials, plant and also product hierarchy.
If u want to share any information.It would be much better for me.Like iam learning SAP.
thanks. -
How to find datasource and standard cube for given R/3 table
Hi All,
Can anyone help me that how to find a datsource, standard cube and Standard BI reports for given R/3 table.
For example if am having the table names "EKKO (Header)
EKPO (Line item)
EKET (Schedule Lines)
EKBE (PO History)
EKKN (Account Assignment/WBS)
EKAN/EKPA (Partner Info)" for all these tables how can i find the standard datasource and standard Cube.
Please help in this. I will assign the points.
Regards,
Shanthihttps://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
MM
Data Sources Tables
Purchasing
2LIS_02_SCL EKKO, EKBE, T001, T001W, EKET, EKPA.
2LIS_02_HDR EKKO, EKBE, T001, EKPA.
2LIS_02_ITM EKKO, EKBE, T001, T001W, EKPO, TMCLVBW, T027C, ESSR, T147K, T147
2LIS_02_SCN EKET, EKES, EKPO.
2LIS_02_CGR EKBE, EKES, EKPO.
2LIS_02_SGR EKET, EKBE, KKPO
Inventory
2LIS_03_BX stock tables, MCHA, MARA, T001, T001W, CALCULATED FROM MBEW, EBEW, QBEW.
2LIS_03_BF MSEG, MBEW, MKPF.
2LIS_03_UM BKPF, MBEW, QBEW, EBEW, BSEG.
MM
Purchasing Datasources
ODS
0PUR_O01 2LIS_02_ITM, 2LIS_02_SGR, 2LIS_02_CGR, 2LIS_02_SCN.
0PUR_O02 2LIS_02_HDR, 0PUR_O01
0PUR_DS03 2LIS_02_SCL and 2LIS_02_SGR.
CUBE
0PUR_C10 2LIS_02_SCL and 2LIS_02_SGR.
0PUR_C07
0PUR_C08
0PUR_C09 0PUR_O02, 80PUR_O01, 2LIS_02_HDR
0SRV_C01 2LIS_02_S174
0PUR_C04 2LIS_02_S011, 2LIS_02_SCL, 2LIS_02_ITM, 2LIS_02_HDR
0PUR_C01 2LIS_02_S012, 2LIS_02_ITM, 2LIS_02_SCL
0PUR_C02 2LIS_02_S013
0PUR_C05 0MM_PUR_VE_01
0PUR_C06 0MM_PUR_VE_02
0PUR_C03 2LIS_02_S015
Inventory Management
CUBE
0IC_C03 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM
0IC_C02 2LIS_03_S195, 2LIS_03_S197
0IC_C01 2LIS_03_S196, 2LIS_03_S198
SD
Data sources Tables
2LIS_11_VAKON VBUK, VBUP, VBAK, VBAP, VBKD, KOMV, T001.
2LIS_11_VAHDR VBAK, VBUK, T001
2LIS_11_VAITM VBAP, VBUP, VBAK, VBKD, VBAJP, T001, VBUK, PRPS.
2LIS_11_VASCL VBAP, VBUP, VBAK, VBEP, VBKD, T001, PRPS
2LIS_11_VASTH VBUK
2LIS_11_VASTI VBUP, VBUK
2LIS_11_V_ITM VBAP, VBAK, VBKD, VBUP, T001, PRPS, VBUK.
2LIS_11_V_SCL VBUP, VBEP, VBKD, VBAP, VBAK, T001, PRPS.
2LIS_11_V_SSL VBAP, VBEP, LIPS, WVBEP, VBUP
2LIS_13_VDKON VBUK, VBRP, KOMV, T001, VBRK.
FI
DATASOURCES Tables
Cost Center Accounting
0CO_OM_CCA_1 COSP, COSS
0CO_OM_CCA_2 COSP, COSS
0CO_OM_CCA_3 COSL, COKL.
0CO_OM_CCA_4 COSR
0CO_OM_CCA_5 COSB
0CO_OM_CCA_6 COOMCO
0CO_OM_CCA_7 BPJA, BPPE.
0CO_OM_CCA_8 COST, TKA07,COOMCO, CSLA, COST, COKL.
0CO_OM_CCA_9 COVP (COEP& COBK), COSP, COST, COEJ, COEP, T001.
0CO_OM_CCA_10 COOI, COSP_VTYPE.
Product Cost Controlling
0CO_PC_PCP_01 KEKO, TCKH3, TCKH8.
0CO_PC_PCP_02 KEKO, TCKH3.
0CO_PC_PCP_03 CKIS, T001K, TKA02, KEKO, MARA, MBEW.
0CO_PC_PCP_04 CKIS, T001K, TKA02, KEKO, MBEW, MARA
0CO_PC_01 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
0CO_PC_02 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
Hope this Helps. -
List of Standard Sap ineteractive forms
Hi Experts
i would like to know if there is a list of standard sap interactive forms that can be utilised. I know if you do a drop down in transaction SFP you can view all the standard sap forms availble for you to utilise but a large number of them do not have a description next to them and some of the one's that do have description, the descriptions are not very helpfull.
i want to see if there are standard sap forms available before going and creating a new one, also how do i know in which program these forms are utilised eg webdynpro's etc.Hi ,
Go to SE38 and use FP* to get reports used for Interactive forms , similarly go to SFP transcation and serach forms FP*.
You will get list of it.
Reward if helpful.
Thanks,
Madhura -
How to find list of pending statements ????
How to find list of pending statements ? I want to show a report using SALV_WD_TABLE component for providing basic ALV features like sorting, filtering, exporting to excel sheet. ?
Aisurya Kumar Puhan wrote:
Hi kris,
> No not any standard component using for this.. I need only to know in which tables i can find these.....
>
> Thkx
> Aisurya.
You need to elaborate your requirement.
this is not leading anywhere.
thanks
sarbjeet singh -
How to find out the standard smartforms?
how to find out the standard smartforms?
Hi Sunil
You just go to transaction <b>SE80</b>(Object Navigator)
and in that enter <b>Package BC470</b>
which contains the standard Programs on Smart forms ,
I think there you can find some Smart forms in those programs.
I hope it will help you.
If it helps reward with points.
Regards Rk -
How to find the webclient in SAP MDM server
How to find the webclient in SAP MDM server
Thanks In Advance
GuruvaReddyHi Guruva,
If you are talking about MDM APIs, then you will get them from Service place when you download the complete MDM 5.5 Suite. You need to choose the API which is appropriate to you. MDM comes with 2 different APIs - Java API and COM API as of SP1(The news is.. ABAP API is under development).
Pre-requisite for building applications using Java APIs is basic Java skills.
Regards,
Rajani Kumar K -
Standard SAP EXIT on Text Variables
Hello Experts,
I am working on Customer Aging Analysis. first of all I want to use standard SAP Queries and want to have a look on standard SAP EXIT created on variables.i have opened the query no 0FIAR_C03_Q0005. here it shows me one text variable 0P_KEYD2. now i want to see that SAP EXIT created on the variable of Posting Date.
I went to SE37. i entered the Function Module EXIT_SAPLRRS0_001. but i didn't get standard SAP EXIT given by SAP.
Can anyone tell me from where i can activate or Get the standard SAP EXIT ?
Regards,
Komik ShahHi Mansi,
Thanks for your reply.
now if i want to add that SAP EXIT in EXIT_SAPLRRS0_001, then can i add it ? or do i have to directly use RSVAREXIT_0P_KEYD2 ??
All standard SAP EXIT will work the same way you mentioned ?? means goto SE37 --> type Variable Name --> get that exit.
Regards,
Komik Shah -
How to find Archive data In SAP
Hi experts ,
How to find Archive data in SAP throught the following tcodes FTWL & AS_afb.
Thnx
VenkyHello,
Transaction FTWL is for the DART files (not actually archived data) that are stored in your archive server. In order to run a query, or browse the DART file, you would need to "Import from archive" from within FTWL and then browse the file.
I am not sure what you mean by AS_afb. Please provide more information.
Regards,
Karin Tillotson -
List of standard SAP Reports with their description
I nned to have a list of standard SAP reports along with their description. Is there a way to retrieve this by a T-Code?
Please help asap.Run the T-code
System -> Status -> Program
TSTC table (SE16) has the complete list of all t-codes that exists in your system and their program name.
Table TSTCT will give you the description of the t-code.
Cheers.
Ashish -
Hi, how to find existing prog in sap
hi
can anyone tell me how to find existing prog in sap, i mean is there any transaction code or anything through which i can know all the existing prog in sap.
pl help as fast as u could
thanx
rockyhi Rocky,
If there are two programs with same functionality they will have the same description . so to search the program based on description ... use SE84 Tcode
in that expand Programming -> Program Library -> Programs double click on programs and give the description and execute ..
or else goto TADIR table and give the object type as PROG and execute
Regards,
santosh -
How to find whether the installed sap software is 32 bit or 64 bit?
How to find whether the installed sap software is 32 bit or 64 bit?
Hi Community,
We have Windows machine - 64 bit - x64. So, we can install either 32 bit or 64 bit sap software, both are supported, right. Now, a sap system is already installed on this machine and i would like to find out whether the sap software is 32 bit or 64 bit, how can i check?
I have already seen under Menu System - Status - Other Kernel Info & at OS level, with the command disp+work but i cant find the info iam looking for.
Please help.
Regards,
Mohan.Hi Sunny,
Thank you very much for your quick reply.
Didnt know that one has to look under "Compiled for".
Regards,
Mohan.
Maybe you are looking for
-
I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?
-
Best way to extend Airport Extreme signal
Like most folks, I had no idea what a poor choice it was to let my internet service providor install my DSL connection in the far corner of my home. So until I install a phone or cable jack in the middle of my place, half my signal is wasted in the b
-
IPhoto 5 slideshow music still available after upgrade to iPhoto6?
I've just upgraded to iPhoto6 and see that the default slideshow music has changed. I'd still like to use the iPhoto5 default music - does anyone know if this should still be available?
-
Error in initializing the database engine
Hi everyone, We are currently facing a problem while trying to login the MDM repository. Earlier we got the WinSock error after that we were not able to login to the repository, afterwards we try to remount tyhe server but it showing the following er
-
10.4.9 Scroll Wheel Problem - using Safari with a mouse with scroll wheel.
Since installing 10.4.9 I have noticed that when on web sites with Safari, when using the scroll wheel on my Logitech MX1000 Laser cordless mouse (Jan 2005) with Logitech control Center 2.1.3 (latest), suddenly you can no longer scroll using the whee