How to find "Macintosh HD" like in os 10.6

I've recently installed Mountain Lion on my mac, but i am in trouble : i can't find the "Macintosh HD" icon also I can't find the user folder in the finder .
How can I solve these problems?
regards

Bad upgrade, it happens
Step by Step to fix your Mac

Similar Messages

How to find the Changes like functional location category

Hi Experts,
Can anyone guide me as to how to get the changes in Func loc category made for a func location through front end transactions or through tables when the Change document check box for Func location category has been activated and/or not activated.
Faster response will be highly appreciated and rewarded.
Regards,
Manish

Hi,
Go to that Functional Location, Extras -> Display Changes, that will display all the changes made on that FL.
Regards,
Maheswaran.

How to find print preview for purchase order like what we find in va03

hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank u

Hi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji

How to find out important fields in table like MARA?

How to find out important fields in a table for example like MARA?
Details: In R/3 or ECC table for example MARA;
1) How to find out what are the important fields?
2)Does the table have only key figures not characteristics right?
3) There are so many tables in FI; Can you please tell me what are the important tables?
4) There is any easy automatic way to figure out that the particular datasource for example 2lis_02_item is pulling data from so and so table. I like to know the process not the results please.
Thanks in advance.
York.

Hi York,
Let me go by points:
1. There is nothing like important fields ... The question could be Key fields ... the fields which identify a record uniquely ... If you go to SE11, and go inot the dispaly of MARA table ... you will see that there is tick mark under key to indicate that the field is a key field ... All the fields which are so marked would identify a record in the table uniquely. If your question is otherwise ... (Important fields) ... then it depends on the purpose you wnat to meet ... Some fields might be important for me but not for you ... so there is not hard nad fast rule for important fields.
2. No... Tables in R/3 or ECC would contain both Key figures and characteristics.
3. Important tables in FI would be BKPF, BSEG and BSET.
4. The procedure for finding out which table are used by say 2lis_02_item would be different from that of other non LO/LIS extractors.
In case of LO/LIS turn on the trace (below process) while populating the setup tables and for thoers while executing RSA3.
1. Open one session and go to ST05, click on "Activate Trace"
2. Open another session and execute the transaction you want to track for the tables it is going to hit.
3. Go to the session of point 1 above and click on DEACTIVATE TRACE
4. Click on DISPLAY Trace
This will show you all the tables that were hit while extracting data. Point to remember here is ... it will hit some standard tables as well ... so you will have to filter out what is relevant from what is not.
Hope this helps.
best regards,
Kazmi

I would like to update the latest Adobe Flash as mine is outdated, but it says it can't install as my antivirus software is preventing it and I need to allow it. My problem is I don't know what my antivirus software is or how to find it on my Mac to

I would like to update the latest Adobe Flash as mine is outdated, but it says it can't install as my antivirus software is preventing it and I need to allow it. My problem is I don't know what my antivirus software is or how to find it on my Mac OS X 10.9.5 to adjust the settings. Help

We don't know what it is either.

HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual)

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello there, g0ddess.
The following link proves to be a great resource to get started with Apple Training and Certification:
Training and Certification
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How can I find all messages like this?

What criteria can I use in a smart mailbox to find all messages like this?
The message from Robert Nicholson <[email protected]> concerning “Hi Testing” has not been downloaded from the server. You need to take this account online in order to download it.
I have a lot of these because I use IMAP for my mail but there's no point in keeping these messages as they were deleted from the server a long time ago.

Robert,
I am not sure what a Smart Mailbox would have to offer with respect to this?
However, the problem is likely not that the message has been deleted from the server, but that Mail 2.0 has problems with some IMAP servers at displaying some messages.
I am hopeful, but cannot assure anyone, that a fix is being worked on for this, and perhaps will be available sometime in the future.
If you were to access with a different version of Mail, such as 1.3.11, or another mail client, you might access these messages. Therefore, I would not be quick to try and eliminate them.
Ernie

How to find the records using contains with the word like this 'some text-some text'?

Hi,
How to find the records using the full text contains keyword and that column contains ‘some text-some text’
In the above some text can be anything.
Does anybody know please let me know.
Thanks,

Hello,
You can try to create a Full Text Index on the table and use CONTAINS() to get the record which contains the specify words.
For example:
SELECT * FROM TABLE WHERE CONTAINS(column_name, 'some text')
Reference:
Full-Text Search (SQL Server)
Creating Full Text Catalog and Full Text Search
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out web-inf path from the physical drive?

How to find out web-inf path from the physical drive?
I have some user profiles in web-inf directory.SO I want to know the path from root directory like
d:/program files/allaire/jrun/appname/web-inf/profiles/username like that.
Presently I am able to get the path upto the application directory and from that I am concatinationg web-inf/profiles/username .
But it is giving problems when it is deployed under unix or linux.Because web-inf there it treats as WEB_INF
SO I want to get the path of web-inf directory with out hard coding.
Thanku

String path = application.getRealPath("/WEB-INF/profiles/username");
Note sure why you need this, but you don't need the real path to read the file - you can get an InputStream using the relative path. See ServletContext getResource() and getResourceAsStream().

How to find out number of years worked using sql

Hello,
How to find from a table which has hiredate and should return number of years worked with range like 0-5, 5-10,10-15 etc.
Any help is highly appreciated.
Thanks

I think this query can solve your issue
SELECT CASE yeared,COUNT(CASE) FROM
SELECT
CASE
WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=5 THEN '0-5'
WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 5 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=10 THEN '5-10'
WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 10 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=15 THEN '10-15'
WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 15 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=20 THEN '15-20'
WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 20 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=25 THEN '20-25'
WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 25 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=30 THEN '25-30'
ELSE '>=30'
END CASE
FROM scott.emp )
GROUP BY CASE
Regards.

How to find PO number from ORDRSP Idoc.

Hi,
Can anybody let me know how to find the PO number from the Idoc ORDRSP.
Scenario is as below:
SAP system1 will send PO to SAP system2.(Idoc type ORDRS05).
When SO is created in SAP system2, it will send a confirmatory Idoc of message type ORDRSP.
From this I have to find the PO number as I can find only VBLNR.
Points assured for workful solutions.
-B S B

Hi BSB,
CHECK THIS CODE
DATA : BEGIN OF itab_status OCCURS 0,
          idoc           LIKE edids-docnum,
          date_stauus    LIKE edids-logdat,
          status_counter LIKE edids-countr,
          status         LIKE edids-status,
          descrp(70),
          ponumber       LIKE ekpo-ebeln,
          mess           LIKE edidc-mestyp,
END OF itab_status.
DATA: text111        LIKE e1mbxyi.
DATA: text11         LIKE e1edp02.
IF itab_status-MESS = 'WMMBXY'.
   select single * from edid4 INTO ITAB where segnam = 'E1MBXYI' AND
                 HLEVEL = '02' AND DOCNUM = itab_status-idoc.
MOVE : ITAB-SDATA TO TEXT111 ,
text111-EBELN TO itab_status-ponumber.
ELSE.
YOUR CASE FALLS IN THIS CATEGORY****
select single * from edid4 INTO ITAB where segnam = 'E1EDP02' AND
                 HLEVEL = '03' AND DOCNUM = itab_status-idoc.
MOVE : ITAB-SDATA TO TEXT11 ,
text11-BELNR TO itab_status-ponumber.
ENDIF.
endif.
LET ME KNOW IF YOU NEED ANYTHING ELSE.
THANKS
VENKI

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to find port number , when there will be different instance number ?

In case of portal url,
port number is 50000 for default instance number 00.
how to find port number , when there will be different instance number , instead of 00?
Thanks

Hi
You can find the port number by your instance number as follows:
There is a general format for the port number like you have mentioned.
For 00 instance the port number is 50000.
The general format for the port number goes like this:
5<instance_no>00
If your instance number is 01 then the port number would be 50100.
It depends on the installation type which you perform.
You can also change the instance number during the installation but normally you dont do this.
If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
Hope this solves your doubt.
If you need some more clarification please lemme know.
Regards
Sumit Jain
**Rewrd with points if useful.

How to find "Macintosh HD" like in os 10.6

Similar Messages

Maybe you are looking for