How to find main program
Hi,
I have a include program RV64A811. i need the main program. But if used where used list its saying there is no related prgram.
So how to find, plz help this
Mohana
SAPLV61A is the main program name.
Your Include is a Routine. What you can do is .. goto your report and click the 'Display Object List' button
(CtrlShiftF5) and it will show the main function group in which your include has been defined.
<b>Reward Points if useful</b>
Regards,
Abhishek
Message was edited by:
Abhishek Jolly
Similar Messages
-
HOw to find Report program associated module pool program?
HOw to find Report program associated module pool program?
I.e
Me21n is the tcode.I want to find screens related to this tcode.
Associated report program is RM_MEPO_GUI.(It has no screens hence it is a report program).
(if module program is attached to tcode,i can easily find entries in d020s)
Here report program is calling a module pool program SAPLMEGUI(Has screens).
If i give the Tcode Me21n,i want to list out all the screens of it..
Can u give any suggestion....Hi Sampath.
Manually i can see it (by seeing in system-status)..
programmatically i want to know..
for ex:if u take Tcode:Va01
we can get program (dialog) and tcode in Tstc table .
If we know the program name(dialog), we can find program and screens in d020s table.
Va01 is atatched to a module pool program..No problem to find screens..
In case of me21n,
It is atatched to report program(calling module pool program)..
Here i could not be able to get the screens ..
I think u undrstood my problem.. -
How to find standard Programs for perticular prog.
Hi Abapers,
How to find standard program is avalible or not in SAP to up load data for vendor master updataion ... through BDC or LSMW or BAPI ? .
If standard program is avalible in SAP . we can use it to upload ?.hi madhu
yes we can upload the data , we can use the Direct input methods to upload the vendor master using LSMW tool . As goutham suggested use RFBIKR00 to upload the vendor master.
~linganna -
How to find the program name of the smart form?
How to find the program name of the smart form if output type is not known?
thanks in advance...How to find the program name of the smart form if output type is not known?
thanks in advance...
T-code SE16
Enter table name: TNAPR -> Press enter key
Enter smartform name in input field(SFORM): Z_your_smartform_name
Execute
you can find program name under the column PGNAM/Program name.
Regards
sudheer -
How to find the program name of the created sap query ?
how to find the program name of the created sap query ?
Hi avinash,
Try in this way..
Go to SE16 and then go to table TSTC.
in that give program name as <b>*followed by your query name</b>
(for example *TESTQUERY)
and run , that will give progname======queryname.
this way you can find program name.
vijay -
How to Find Which Programs running in my Domain Computers
How to Find Which Programs running in my Domain Computers.
In addition, there are other third tools you can use. Here is a script from the TechNet Scripting Gallery:
List All Installed Software
Returns a list of all software installed on a computer, whether or not by Windows Installer. This script reads installed applications from the registry. (See Richard Mueller's comment on how to output it to a CSV file)
http://gallery.technet.microsoft.com/scriptcenter/8035d5a9-dc92-436d-a60c-67d381da15a3/view/Discussions
Of course that's just running it against one computer. There's also a script in the above link (scroll to the bottom) that will find installed software of a list of computers in a network and also detect the defined forbidden installed software, and
another script that will uninstall that software remotely.
Overall however, if you want to do this network wide with much a much easier method (although more complex to setup), I agree with using SCCM or Spiceworks. There is also Altiris, and a number of other third party solutions that you can use.
Maybe if you can provide more specific information on the end result of the solution you are looking for, we can provide more specifics to help you.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
If we dont know the request no and program name how to find that program
hi gurus
can anyone suggest me
if we dont know the request no and program name how to find that program
thank you
regards
kals.Hi,
If u forget all the details It is very difficult to find, u have to remember at least some details regarding to that program.. for that
1.. goto SE80 give u r package name u will get all the programs which r u developed according to the discription u can get some idea which u want.. and
2... go to SE09 trcode.. display all tr numbers..here all trs are there what u developed, u can get some idea by looking the description of the tr numbers..
I hope so u can get at least some thing .
Thanks and Regards,
Surya -
How to find a program, which is using "Z" variant
Hi All,
I know only on custom devloped variant name, say "ZTEST". I do not know, which program is using it. Entry is there in TVARV table.
Please let me know, how can I find the program, which is using that variant.
Thanking you,
Chetan ShahHi Chetan,
The variants for a report will be stored in the table <b>VARI</b>.
Give your variant name to the field VARI-VARIANT and it will give the report name in the field VARI-REPORT.
If you have same variant for the other reports, then it will shows the list of reports which the same variant name.
I am working on ECC 5.0 and able to see this table.
Thanks,
Vinay -
How to find print program from script
Hi,
How can i find the print program from the script .
i unable to find in TNAPR table.
thanks,
sriiHi Sridhar,
U can find in NACE transaction.
Please check this link
search print program and sap script
with po no how to find script and print program for that po.
Best regards,
raam -
How to find Application Program for fstandard orm in GTS
Hi,
Good day!
I would to ask for your assistance with regard to the Application Program that retrieves data for standard Smartforms in GTS.
To be specific, anyone knows how to find the Application Program for the standard Export Declaration Form --- /SAPSLL/SF_CH_802AZV --- in GTS?
Thank you very much!
Best regards.
BrandoTransaction NACU or NACE doesn't exist in GTS. But, in SPRO i already saw the standard form as the defualt value. However, there's no Application Program assigned to the form in SPRO. Can anyone help me with this?
-
How to find Transactions/Programs are Active or Locked
Hello Friends,
How to find, what are all the Transactions/Programs are Active/Locked in the Production(PRD) Environment.
Is there any table or transactions available to find it out?
Please assist.
Regards,
Shrinivas- To be confirmed : look at field CINFO in table TSTC, if it contains hexadecimal values of '80', '01', '02' or '20' it is locked (not sure, check)
- Use a call 'DY_CHECK_TRANSACTION' id 'TX' <tcode> if sy-subrc = 3 the transaction is locked.
- Use a call FM AUTHORITY_CHECK_TCODE, if NOT_OK is raised and the message i348(s#) is sent the transaction is locked
- First check via AUTHORITY-CHECK OBJECT 'S_TCODE' ID 'TCD' FIELD <tcode> and if the object is allowed but NOT_OK is raised by the FM AUTHORITY_CHECK_TCODE, the transaction is locked.
Regards,
Raymond -
How to find Driver program for a smartform
Dear Friends,
I'm new to smartforms. Can any of you tell me how to find the Driver prog for a smartform.
Many thanks in advance.
Thanks & regards,
Raghuveer K.If the application uses message control to print the smartform, then chekc in TNAPR, TNAPR-PGNAM is program name and TNAPR-SFORM is smartform.
If you are trying to look for SAP standard program for SAP smartform, get the development class/Package name of the smartform from general attributes, and look for the best matching program name in the dev class in SE80.
That's one way to find.
Do a where used list on fm SSF_FUNCTION_MODULE_NAME, and search for the smartform name in the resulting programs. if you are lucky, you can find it quickly.
There's no defined process to fine print program for a smartform.
Regards
Sridhar -
How to Find unused programs / T-codes for the past three months
How to find the unused programs / transaction codes for the past three months,
I tried with the ST03 Transaction but it gives only the Tcodes, program used in last one monthu2026
Regards,
PurshothThis depends on the data retention time (in days) maintained in your system. In ST03, on the right hand side, check "Collector" tab, under that "Performance Database" and then "Reorganization" which will give you the details retention times (in days).
Also please check the link http://inet.tamko.com:8081/saphelp/helpdata/EN/c4/3a68d5505211d189550000e829fbbd/frameset.htm for more details.
Thank You. -
How to find out program name to the corresponding output type of invoice..
hi ALL,
I want to findout program name to my output type.
For one invoice functional peoples are configured. Here i know the outtype. But i don't know the program name .
Can any body please tell me how to find out the program name for the output type..?Hi,
Goto NACE t-code
Select Billing (V3)
Press 'Output Types' Button
In the next screen select the corresponding output type you want.
Then press 'Processing Routines' in the left pane. You can see the program name
Cheers,
Kothand -
How to find the programs created by date
Hi all
I would like to find the programs created by date and by report title. Is there any report to find programs by date or by report title..?
Thanks
Prasead KHi ,
Can anybody tell me how fo find out the date on which a Tcode was created?
Thanks,
Manjula.s
Maybe you are looking for
-
I am unable to open Firefox whenever I want to go online
This morning I tried to open Mozilla Firefox to go online like I always do, but it didn't open. I tried several more times and even tried restarting my computer, but it never worked. I even tried deleting it and re-installing/downloading it, but then
-
Back from ALV Grid with multiple refresh
I have a report that from a selection screen shows an editable ALV Grid, and after I save it, it will refresh the grid. My problem is when I hit the BACK button it returns to the "previous grid" instead of the selection screen I am using the followin
-
I have an iTunes with music and videos. My wife has an iPhone with music and apps. How do I get both on our iPad2? Without syncing to just one account? We each have our own laptops.
-
Java Script in OAF to open a client machine Application
I was trying to use java script in OAF to open any kind of application located on client machine like notepad, calc etc.. Here is my original java script <html> <script Language="JScript"> function runcmd() { File='mspaint.exe'; WSH=new ActiveXObject
-
Regarding Remuneraton Statement Smartform
Hi Experts, I am using HR_ESS_PAYSLIP_TO_PDF Smartform but i don't know the input can any body tell me input of this SF. becasue right now when i am executing the SF then i am getting empty page. Please its very urgent...... Rajneesh