How to find master data and atrribute

Hi Experts,
I have table in ECC, transectional data coming from there.
how to find attrib and hierarchies
they have attrib and hierarchies, how to find which one to use.
Thanks

Since there is a table doesn't mean that you will have attribute and hierarchy from that table. Seems like you are using top to down approach (Since you have the table, you are looking to create master data from that table). try to think bottom up approach; basically you have requirement and you need to find which object will satisfy your requirement. Look at what objects you need and check if SAP delivered of those objects with their extractor, never mind where it is coming from (Object Oriented approach.... Incapsulations) but it does what you need.
HOpe I am clear.
thanks.
Wond

Similar Messages

How to find the Date and Time of Modification of Column in aTable?

Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar M

I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

How to load master data and hierarchies from R/3 systems

HI all,
how to load master data and hierarchies from R/3 systems.
Please explain the steps.
Thanks,
cheta.

HI,
Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
Generally, the control parameters for data transfer from a source system are maintained in extractor
customizing. In extractor customizing, you can access the corresponding source system in the source
system tree of the SAP BW Administrator Workbench by using the context menu.
To display or change the settings for data transfer at source system level, choose Business
Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
limits can be followed.
In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
DataSources. You can determine the size of the data packet, the number of parallel processes for
data transfer and the frequency with which the status IDocs are sent, for every possible update
method for a DataSource.
To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
In this way you can, for example, update transaction data in larger data packets in the PSA. If you
want to update master data in dialog mode, smaller packets ensure faster processing.
Hope this info helps.
Thanks,Ramoji.

How to find master data info objects. Partner function and customer class.

hi,
Can you please tell me what are the available extractors for Partner Function (PARVW from VBPA)and Customer Class (KUKLA from KNA1).
I hope these fields are master data. I checked in 0customer. But I didn't find it. There is a info object (Business partner). Is it the same?
pls reply

I will admit that I am not familiar with ECC and there may be different interpretations of what KUKLA means and different means of extracting Customer information to/from ECC.
However, for us, when extracting Customer Attributes using the 0CUSTOMER_ATTR datasource in R/3, we map KUKLA to 0CUST_CLASS. They are both set up as 2 CHAR. That is not to say that you should also. You can map it to a custom infoobject in BW as long as you set it up as an attribute of 0CUSTOMER. KUKLA is available in the standard datasource 0CUSTOMER_ATTR in R/3. When looking at what is available in the infosource for 0CUSTOMER in BW, 0CUST_CLASS is a logical choice to map.
As far as VBPA-PARVW, VBPA is not a source for master data for 0BPARTNER. VBPA contains the business partners associated with Sales documents. So if you are going to create a data provider (cube/ODS) in BW and VBPA-PARVW is part of the transactional datasource in R/3, the you can map it to 0BPARTNER in your cube/ODS.
Hope this helps.

How to find the date and time difference in InfoPath 2013?

Hi All,
My date and time format is like: 2013-12-24T10:47:38 and have three fields Start date, End date and Actual time taken.
If start date and end date filled then actual time taken field should automatically should fill, for example 2 days 12 hours 48 min 3 sec.
How to achieve this?

Hi Sam,
I believe we had discussed the same issue in the below thread. Can you please refer the below one?
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d93e16ff-c123-4b36-b60b-60ccd34f6ca7/calculate-time-differences-in-infopath?forum=sharepointcustomizationprevious
If it's not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

How to find the Date and time of Installation of Oracle in Windows?

Hi ,
Is there any way to find the installation Date and time of Oracle in Windows?
Regards
Rajesh

If you have never recreated/restored/reincarnated the database, then CREATED column from v$database should tell you when you created the database.
If you are looking for the date/time of installation of Oracle home, check the logs under OraInventory.
Reply by Satish sir at following link:
installation date/time of a database !!
Hth
Girish Sharma

How do I find the date and time stamp on pictures?

How do I find the date and time stamp for my pictures?

The Photos app will not do this but other apps will. iPhoto has an icon that when tapped with the photo open will show the EXIF information you are looking for. iPhoto is not free but you can purchase it in the App Store.
There may be other photo apps that provide this information as well.
PhotoForge2 will show the EXIF data as well as the GPS data if it is available.

HT5527 I HAVE OLD PHONES BACKED UP. how do i find the data and recover or delete dups and junk

I HAVE OLD iPHONES BACKED UP. how do i find the data and recover or delete dups and junk

You can't see the data inside the backup, and you can't restore just part of the data if that's what you're asking. To see the data you have to restore the entire backup.

How to configure CVC automation process using SNP master data and BI customer master data

Hi Gurus,
How to configure CVC automation in MPOS structure technically, using SNP master data in CVC creation such as Product and location details
and in parallel extract date from ECC to BI customer master data in DP. Where-in a APO BI cube should have only new combinations which are to be validated with ECC and existing combinations in the MPOS structure before creation of CVC in different regions of MPOS.
Second the automation should also check certain validations of product, location and are part of SNP-ECC master data and are these new combinations.
Could someone guide us in this process.
Thanks
Kumar

Praveen,
The short answer is to move the data into infoproviders or flat files for all of the 'characteristic-type' source data; and then copy CVCs from the infoproviders into the Planning area, probably using one or more Process Chains (program /SAPAPO/TS_PLOB_MAINTAIN).
The long answer is that this is not a trivial undertaking; this could end up being a pretty involved solution. If you do not have enough BW/DP expertise available locally to create this solution for you, then I recommend you consider engaging external resources to assist you. I personally wouldn't even consider starting to work on such a solution without first knowing a lot more about the detailed business requirements, and about any existing solutions that may already in place. An SCN forum is not really suitable for such an answer. In my opinion, the BBP doc alone would be 20+ pages, assuming no enhancements..
Best Regards,
DB49

How to start Designing Master Data and transactional Data

Can anyone tell me how to really start to design Master Data and transactional Data in Sales? What are the steps if is it possible to share? Thanks!

Hi Lei,
first step is to read all necessary document on help.sap.com about Business Content for SD. Here you can see all the parts covered directly by SAP with the Business Content.
Then you can start the GAP analysis: you check if all your requirements are fully covered by BC or not, in this second case you can start developing your own InfoObjects.
Start always by Business Content.
Take a look also at this doc:
<a href="https://websmp110.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E">https://websmp110.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E</a>
Ciao.
Riccardo.

SAP BPC 7.5: Master Data and Hierachiy Load from InfoObject

Hallo Forum Participants,
I am going to load Master Data from a "Clarity" Reporting Tool in BW to SAP BPC 7.5 via Process Chains (/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) delivered from SAP.
These Process Chains load the Master Data and Hierarchies from an InfoObject. To find out more about Ticking of BPC I have performed a following test. So, on BPC Admin Interface I have duplicated the Dimension u201CAu201D and called it as Dimension u201CBu201D (in BW site InfoObject u201CAu201D and u201CBu201D). In the Member Sheet of Dimension u201CBu201D I have implemented the several changes und tried to load Master Data from BW namely from infoObject u201CBu201D into BPC Dimension u201CAu201D. Therefor I created a transformation file and mapped one for one IDu2019s. The data Manager started these chains, but resulted nothing (Status: red X).
What are the features of BPC InfoObjects in Comparision with regular InfoObject?
How can I load Hierarchies into InfoObject?
What else I must take into account?
Why does not work this simple test?
Regards.
Alisher
Edited by: Alisher Babaev on Jan 6, 2012 1:59 PM

Hallo pkrishna,
so it is successed with master data load, but without hierachiies.
My Master Data Properties on Dimension Sheet are:
-ID
-EVDESCRIPTION
-PARENTH1
-CURRENCY
I have mapped as below:
ID=ID
CURRENCY=/CPMB/CURR
/CPMB/CURR- my technical id in BW.
In the Note you advised transformation file has been mapped like below:
-NODENAME=NODENAME
-HIER_NAME=HIER_NAME
-PARENT=PARENT
-ORDER=ORDER
After executing of package i get whether rejected list or log file. No data can be retirieved from InfoObject.
Have you any Idea?
regards

What is master data and bussiness data

Dear all
I am new guy of crm.
I have some question.
What is master data and transaction data.
What is sold to party,ship to party.
What is heirar key.
What is header data and item data.
Regards
Amit sahay

Hi,
Master Data
Purpose
Data about basic objects used in business transactions and stored in the system on a long-term basis.
This area enables you to store, augment, and consolidate master data, while ensuring consistent distribution to all applications and systems within your IT landscape. By ensuring cross-system data consistency, master data management reduces data maintenance costs, accelerates your business processes, and greatly improves your decision-making processes.
Business Transaction
Definition
Business object in SAP CRM that offers the following possibilities:
        Business interaction with a business partner at a given point in time
        The result of an interaction (for example, a contract)
        The initiation of or request for an interaction (for example, an opportunity)
        The preparation (that is, the collection or supplementation of information) for a possible business interaction (for example, an activity)
        The product or object or a (potential) interaction (for example, a sales transaction or service process)
The same interface and processing concept is used for all business transactions. The various components of business transactions are reusable.
Use
The business transaction provides business structures and functions that can be used in various processes of a company, for example, in sales, marketing, or service.
In CRM, business transactions are used in the following areas:
        Sales:
¡        Sales transactions (sales orders, inquiries and quotations)
¡        Opportunities
¡        Contracts
        Marketing:
¡        Lead Management
        Service
¡        Service Process
¡        Complaints
¡        Service Confirmation
         Activity Management
¡        Interactions
¡        Task Lists
Business transactions can be created, displayed, and processed in various channels.
A sales order can be created in Internet Sales, post processed in CRM Enterprise and then transferred to SAP ECC.
Structure
Business transactions are structured as follows:
The structure of a business activity is based on the answers to three questions:
Who?
The participating business partners can be entered at transaction level.
What?
The products and services to which the business transaction refers can be entered at item level.
When / How Much?
The quantity and the times to be considered can be scheduled at schedule line level.
This is a basic structure, and can differ for certain business transaction categories. Activities, for example, do not contain items or schedule lines. Sales transactions contain all three levels.
Similarly to the business transaction, the item category defines the characteristics and attributes of a transaction item, and controls the processing of an item.
Integration
Various basic functions are linked with the business transactions and can be triggered from the interface for the business transaction if the relevant Customizing settings have been made. These include, for example, the availability check, pricing and partner determination. You can find more information in the SAP Library under mySAP CRM.
See also:
You can find more information on the business transaction in the Implementation Guide (IMG) under Customer Relationship Management ® Transactions ® Basic Settings ® Define Transaction Types and Define Item Categories.
Sold to party:'A' sells product to 'B'.Then "B' is the sold to party for 'A'
Ship To party:A ships(send to ) 'B'.Then 'B' is the ship to party to 'A'(In some scenarious the product can be deliverd eg:'C' then the the ship to party varies
Regards,
Satish Mathala

How to download master data of vendor to Excel

Dear All,
how to download master data of vendor to Excel?

Hi Expert,
To download Vendor Master Data:
Go to T-Code: SE16 and provide LFA1 for General Data and LFB1 for Company Code Data..
and Press Enter, then provide the Vendor Range and Press Execute Button.
Select Menu -- Edit --- Download then select Spread sheet provide the path to save the download file and provide file name and press OK...
Go to the provided path, which may find your Vendor Master Data in Excel format...
Regards,
GK
SAP

How to find BADI Defination and Implemantation from Method of BADI?

HI,
   can anyone tell me that how to find BADI Defination and Implemantation from Method of BADI?

& Report ZPJA_PM002 (V2)                                            &
& Text Elements:                                                     &
& P_DEVC Show user-exits from development class                      &
& P_LIMIT Limit submit program selection                             &
& P_FUNC Show function modules                                       &
& P_SUBM Show submit programs                                        &
& S01    Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 158.
*tables: enlfdir.     "Additional Attributes for Function Modules
data: tabix      like sy-tabix,
      w_linnum   type i,
      w_off      type i,
      w_index    like sy-tabix,
      w_include like trdir-name,
      w_prog     like trdir-name,
      w_incl     like trdir-name,
      w_area     like rs38l-area,
      w_level,
      w_str(50) type c,
      w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
           c_subm(40) type c value 'Submit programs selected: ',
           c_col1(12) type c value 'Enhanmt Type',
           c_col2(40) type c value 'Enhancement',
           c_col3(30) type c value 'Program/Include',
           c_col4(20) type c value 'Enhancement Name',
           c_col5(40) type c value 'Enhancement Description'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
      pname    type tfdir-pname,
      include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of t_userexit,
      type(12) type c,
      pname    like trdir-name,
      txt(300),
      level    type c,
      modname(30) type c,
      modtext(40) type c,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
      clas   like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
Submit programs
types: begin of t_submit,
      pname     like trdir-name,
      level,
      done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab,                        "#EC * (SLIN lügt!)
        line(200),                                  "#EC * (SLIN lügt!)
      end of t_sourcetab.                           "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC
keywords for searching ABAP code
types: begin of t_keywords,
      word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
      name   like rs38l-name,
      pname like trdir-name,
      pname2 like trdir-name,
      level,
      bapi,
      done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options                                                  &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
           p_tcode like syst-tcode,
           p_limit(4) type n default 100,
           p_devc like rihea-dy_ofn default ' ',
           p_func like rihea-dy_ofn default ' ',
           p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION                                                 &
start-of-selection.
if p_pname is initial and p_tcode is initial.
    message e008(hrfpm). "Make entry on the selection screen
    stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
    p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT                                                   &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Get programs/includes'       "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
    select single pgmna from tstc into wa_tstc-pgmna
                 where tcode eq p_tcode.
    if not wa_tstc-pgmna is initial.
      p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
    else.
      select single param from tstcp into wa_tstcp-param
                   where tcode eq p_tcode.
      if sy-subrc = 0.
        check wa_tstcp-param(1)   = '/'.
        check wa_tstcp-param+1(1) = '*'.
        if wa_tstcp-param ca ' '.
        endif.
        w_off = sy-fdpos + 1.
        subtract 2 from sy-fdpos.
        if sy-fdpos gt 0.
          p_tcode = wa_tstcp-param+2(sy-fdpos).
        endif.
        select single pgmna from tstc into wa_tstc-pgmna
               where tcode eq p_tcode.
        p_pname = wa_tstc-pgmna.
        if sy-subrc <> 0.
          message e110(/saptrx/asc) with 'No program found for: '
p_tcode."#EC NOTEXT
          stop.
        endif.
      else.
        message e110(/saptrx/asc) with 'No program found for: ' p_tcode.
"#EC NOTEXT
        stop.
      endif.
    endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
    message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens     into i_stoken
                             statements into i_sstmnt
                             keywords   from keywords
                             overflow into c_overflow
                             with includes.
                             WITH ANALYSIS.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
    message e130(enhancement) raising syntax_error.         "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
    w_level = '0'.
    w_prog = ''.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform.                        "DATA_SELECT
& Form GET_FM_DATA                                                   &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Get function module data'    "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
    clear:   i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
    refresh: i_stoken, i_sstmnt, sourcetab.
    clear wa_tfdir.
    select single funcname pname include from tfdir into wa_tfdir
                            where funcname = i_fmodule-name.
    check sy-subrc = 0.
    call function 'FUNCTION_INCLUDE_SPLIT'
      exporting
        program = wa_tfdir-pname
      importing
        group   = w_area.
    concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
    i_fmodule-pname = w_include.
    i_fmodule-pname2 = wa_tfdir-pname.
    modify i_fmodule.
    read report i_fmodule-pname into sourcetab.
    if sy-subrc = 0.
      scan abap-source sourcetab tokens     into i_stoken
                                 statements into i_sstmnt
                                 keywords   from keywords
                                 with includes.
      if sy-subrc > 0.
        message e130(enhancement) raising syntax_error.
      endif.
check i_stoken for entries
      clear w_linnum.
      describe table i_stoken lines w_linnum.
      if w_linnum gt 0.
        w_level = '1'.
        w_prog = i_fmodule-pname2.
        w_incl = i_fmodule-pname.
        perform data_search tables i_stoken using w_level w_prog w_incl.
      endif.
    endif.
endloop.
if p_devc = 'X'.
    loop at i_fmodule.
      clear: wa_tadir, wa_enlfdir.
      select single area from enlfdir into wa_enlfdir-area
                            where funcname = i_fmodule-name.
      check not wa_enlfdir-area is initial.
      select single devclass into wa_tadir-devclass
                      from tadir where pgmid    = 'R3TR'
                                   and object   = 'FUGR'
                                   and obj_name = wa_enlfdir-area.
      check not wa_tadir-devclass is initial.
      move wa_tadir-devclass to i_devclass-clas.
      append i_devclass.
      i_fmodule-done = 'X'.
      modify i_fmodule.
    endloop.
    sort i_devclass.
    delete adjacent duplicates from i_devclass.
endif.
endform.                        "GET_FM_DATA
& Form GET_SUBMIT_DATA                                               &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Get submit data'             "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
    clear:   i_stoken, i_sstmnt, sourcetab.
    refresh: i_stoken, i_sstmnt, sourcetab.
    read report i_submit-pname into sourcetab.
    if sy-subrc = 0.
      scan abap-source sourcetab tokens     into i_stoken
                                 statements into i_sstmnt
                                 keywords   from keywords
                                 with includes.
      if sy-subrc > 0.
       message e130(enhancement) raising syntax_error.
        continue.
      endif.
check i_stoken for entries
      clear w_linnum.
      describe table i_stoken lines w_linnum.
      if w_linnum gt 0.
        w_prog = i_submit-pname.
        w_incl = ''.
        perform data_search tables i_stoken using w_level w_prog w_incl.
      endif.
    endif.
restrict number of submit program selected for processing
    describe table i_submit lines w_linnum.
    if w_linnum ge p_limit.
      w_level = '1'.
    endif.
    i_submit-done = 'X'.
    modify i_submit.
endloop.
endform.                       "GET_SUBMIT_DATA
& Form DATA_SEARCH                                                   &
form data_search tables p_stoken structure stoken
                        using p_level p_prog p_incl.
loop at p_stoken.
    clear i_userexit.
    tabix = sy-tabix + 1.
    i_userexit-level = p_level.
    if i_userexit-level = '0'.
      if p_incl is initial.
        i_userexit-pname = p_pname.
      else.
        concatenate p_pname '/' p_incl into i_userexit-pname.
      endif.
    else.
      if p_incl is initial.
        i_userexit-pname = p_prog.
      else.
        concatenate p_prog '/' p_incl into i_userexit-pname.
      endif.
    endif.
Include
    if p_stoken-str eq 'INCLUDE'.
      check p_level eq '0'.    " do not perform for function modules
*(2nd pass)
      w_index = sy-tabix + 1.
      read table p_stoken index w_index into wa_stoken.
      check not wa_stoken-str cs 'STRUCTURE'.
      check not wa_stoken-str cs 'SYMBOL'.
      read table i_submit with key pname = wa_stoken-str.
      if sy-subrc <> 0.
        i_submit-pname = wa_stoken-str.
        i_submit-level = p_level.
        append i_submit.
      endif.
    endif.
Enhancements
    if p_stoken-str eq 'CUSTOMER-FUNCTION'.
      clear w_funcname.
      read table p_stoken index tabix.
      translate p_stoken-str using ''' '.
      condense p_stoken-str.
      if p_prog is initial.
        concatenate 'EXIT' p_pname p_stoken-str into w_funcname
                     separated by '_'.
      else.
        concatenate 'EXIT' p_prog p_stoken-str into w_funcname
               separated by '_'.
      endif.
      select single member from modsap into wa_modsap-member
            where member = w_funcname.
      if sy-subrc = 0.   " check for valid enhancement
        i_userexit-type = 'Enhancement'.
        i_userexit-txt = w_funcname.
        append i_userexit.
      else.
        clear wa_d010inc.
        select single master into wa_d010inc-master
              from d010inc
                 where include = p_prog.
        concatenate 'EXIT' wa_d010inc-master p_stoken-str into
w_funcname
               separated by '_'.
        i_userexit-type = 'Enhancement'.
        i_userexit-txt = w_funcname.
      endif.
    endif.
BADIs
    if p_stoken-str cs 'cl_exithandler='.
      w_index = sy-tabix + 4.
      read table p_stoken index w_index into wa_stoken.
      i_userexit-txt = wa_stoken-str.
      replace all occurrences of '''' in i_userexit-txt with space.
      i_userexit-type = 'BADI'.
      append i_userexit.
    endif.
Business transaction events
    if p_stoken-str cs 'OPEN_FI_PERFORM'.
      i_userexit-type = 'BusTrEvent'.
      i_userexit-txt = p_stoken-str.
      replace all occurrences of '''' in i_userexit-txt with space.
      i_userexit-modname = i_userexit-txt+16(8).
      case i_userexit-txt+25(1).
        when 'E'.
          clear wa_tbe01t.
          select single text1 into wa_tbe01t-text1 from tbe01t
                           where event = i_userexit-txt+16(8)
                             and spras = sy-langu.
          if wa_tbe01t-text1 is initial.
            i_userexit-modtext = ''.            "#EC NOTEXT
          else.
            i_userexit-modtext = wa_tbe01t-text1.
          endif.
          i_userexit-modname+8 = '/P&S'.                    "#EC NOTEXT
        when 'P'.
          clear wa_tps01t.
          select single text1 into wa_tps01t-text1 from tps01t
                           where procs = i_userexit-txt+16(8)
                             and spras = sy-langu.
          i_userexit-modtext = wa_tps01t-text1.
          i_userexit-modname+8 = '/Process'.
      endcase.
      append i_userexit.
    endif.
Program exits
    if p_stoken-str cs 'USEREXIT_'.
      i_userexit-type = 'Program Exit'.
      i_userexit-txt = p_stoken-str.
      replace all occurrences of '''' in i_userexit-txt with space.
      append i_userexit.
    endif.
Submit programs
    if p_stoken-str cs 'SUBMIT'.
      check p_level eq '0'.    " do not perform for function modules
*(2nd pass)
      check not p_stoken-str cs '_'.   " ensure not SUBMIT_XXX
      w_index = sy-tabix + 1.
      read table p_stoken index w_index into wa_stoken.
      check not wa_stoken-str cs '_'.   " ensure not SUBMIT_XXX
      replace all occurrences of '''' in wa_stoken-str with space.
      read table i_submit with key pname = wa_stoken-str.
      if sy-subrc <> 0.
        i_submit-pname = wa_stoken-str.
        i_submit-level = p_level.
        append i_submit.
      endif.
    endif.
Perform routines (which reference external programs)
    if p_stoken-str cs 'PERFORM'.
      check p_level eq '0'.    " do not perform for function modules
*(2nd pass)
      w_index = sy-tabix + 1.
      read table p_stoken index w_index into wa_stoken.
      if not wa_stoken-ovfl is initial.
        w_off = wa_stoken-off1 + 10.
        w_str = c_overflow+w_off(30).
        find ')' in w_str match offset w_off.
        w_off = w_off + 1.
        wa_stoken-str = w_str(w_off).
      endif.
      check wa_stoken-str cs '('.
      w_off = 0.
      while sy-subrc = 0.
        if wa_stoken-str+w_off(1) eq '('.
          replace section offset w_off length 1 of wa_stoken-str with ''
          replace all occurrences of ')' in wa_stoken-str with space.
          read table i_submit with key pname = wa_stoken-str.
          if sy-subrc <> 0.
            i_submit-pname = wa_stoken-str.
            append i_submit.
          endif.
          exit.
        else.
          replace section offset w_off length 1 of wa_stoken-str with ''
          shift wa_stoken-str left deleting leading space.
        endif.
      endwhile.
    endif.
Function modules
    if p_stoken-str cs 'FUNCTION'.
      clear i_fmodule.
      check p_level eq '0'.    " do not perform for function modules
*(2nd pass)
      w_index = sy-tabix + 1.
      read table p_stoken index w_index into wa_stoken.
     if wa_stoken-str cs 'WF_'.
     if wa_stoken-str cs 'IF_'.
       break-point.
     endif.
      if wa_stoken-str cs 'BAPI'.
        i_fmodule-bapi = 'X'.
      endif.
      replace first occurrence of '''' in wa_stoken-str with space.
      replace first occurrence of '''' in wa_stoken-str with space.
      if sy-subrc = 4.   " didn't find 2nd quote (ie name truncated)
        clear wa_tfdir.
        concatenate wa_stoken-str '%' into wa_stoken-str.
        select single funcname into wa_tfdir-funcname from tfdir
                     where funcname like wa_stoken-str.
        if sy-subrc = 0.
          i_fmodule-name = wa_tfdir-funcname.
        else.
          continue.
        endif.
      else.
        i_fmodule-name = wa_stoken-str.
      endif.
      i_fmodule-level = p_level.
      append i_fmodule.
    endif.
endloop.
endform.                        "DATA_SEARCH
& Form GET_ADDITIONAL_DATA                                           &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Get additional data'         "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
loop at i_userexit.
Enhancement data
    if i_userexit-type cs 'Enh'.
      clear: wa_modsapa.
      select single name into wa_modsapa-name from modsap
                        where member = i_userexit-txt.
      check sy-subrc = 0.
      i_userexit-modname = wa_modsapa-name.
      clear wa_modsapt.
      select single modtext into wa_modsapt-modtext from modsapt
                        where name = wa_modsapa-name
                                     and sprsl = sy-langu.
      i_userexit-modtext = wa_modsapt-modtext.
    endif.
BADI data
    if i_userexit-type eq 'BADI'.
      clear wa_sxs_attr.
      select single exit_name into wa_sxs_attr-exit_name from sxs_attr
                                    where exit_name = i_userexit-txt.
      if sy-subrc = 0.
        i_userexit-modname = i_userexit-txt.
      else.
        i_userexit-modname = 'Dynamic call'.                "#EC NOTEXT
      endif.
      clear wa_sxs_attrt.
      select single text into wa_sxs_attrt-text from sxs_attrt
                                     where exit_name =
wa_sxs_attr-exit_name
                                       and sprsl = sy-langu.
      i_userexit-modtext = wa_sxs_attrt-text.
    endif.
    modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
                             where pgmid    = 'R3TR'
                               and object   = 'PROG'
                               and obj_name = p_pname.
if sy-subrc = 0.
    clear: wa_modsapa, wa_modsapt.
    select name from modsapa into wa_modsapa-name
                          where devclass = wa_tadir-devclass.
      select single modtext from modsapt into wa_modsapt-modtext
                          where name = wa_modsapa-name
                            and sprsl = sy-langu.
      read table i_userexit with key modname = wa_modsapa-name.
      if sy-subrc <> 0.
        i_userexit-modtext = wa_modsapt-modtext.
        i_userexit-type = 'Enhancement'.                    "#EC NOTEXT
        i_userexit-modname = wa_modsapa-name.
        i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
        i_userexit-pname = 'Unknown'.                       "#EC NOTEXT
        append i_userexit.
      endif.
    endselect.
endif.
endform.                        "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY                                                  &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Prepare screen for display' "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'.                  "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: /    sy-vline,
         (12) c_col1,                    "Enhanmt Type
              sy-vline,
         (40) c_col2,                    "Enhancement
              sy-vline,
         (30) c_col3,                    "Program/Include
              sy-vline,
         (20) c_col4,                    "Enhancement name
              sy-vline,
         (40) c_col5,                    "Enhancement description
              sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
    case i_userexit-type.
      when 'Enhancement'.
        format color 3 intensified off.
      when 'BADI'.
        format color 4 intensified off.
      when 'BusTrEvent'.
        format color 5 intensified off.
      when 'Program Exit'.
        format color 6 intensified off.
      when others.
        format reset.
    endcase.
    write: / sy-vline,
             i_userexit-type,
             sy-vline,
             i_userexit-txt(40),
             sy-vline,
             i_userexit-pname(30),
             sy-vline,
             i_userexit-modname(20),
             sy-vline,
             i_userexit-modtext(40),
             sy-vline.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
    write: /.
    write: / 'User-exits from function module development class'."#EC
*NOTEXT
    write: 157''.
    uline (90).
    write: 157''.
    loop at i_devclass.
      clear wa_modsapa.
      select name from modsapa into wa_modsapa
                   where devclass = i_devclass-clas.
     select single name modtext into corresponding fields of wa_modsapt
                                   from modsapt
                                     where name = wa_modsapa-name
                                       and sprsl = sy-langu.
        format color 3 intensified off.
        write: / sy-vline,
                 (12) 'Enhancement',
                 sy-vline,
                wa_modsapa-name,
                sy-vline,
                wa_modsapt-modtext,
                sy-vline.
      endselect.
    endloop.
    uline (90).
    format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum.                         "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
    uline (38).
    write: 157''.
    loop at i_fmodule.
      write: sy-vline,
             i_fmodule-name,
             sy-vline,
             i_fmodule-bapi,
             sy-vline.
      write: 157''.
    endloop.
    uline (38).
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum.                         "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
    uline (44).
    write: 157''.
    loop at i_submit.
      write: sy-vline,
             i_submit-pname,
             sy-vline.
      write: 157''.
    endloop.
    uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform.                        "DATA_DISPLAY
reward points if it helps
gunjan

How to find 12,13 and 15 character products for 10 char product

Hello Experts,
I Hope you are doing good.
I am unable to find solution for the given below,Its very urgent.
I have to find the 10 character products first. For every 10 chars product i have to find all the 12,13 and 15 chars product.for example
0010101213---10 chars product
0010101213S21---13 chars product
0010101213B1225--15 chars product
We can see the products in customs mgmnt->master data->maintain products->display.
It is very urgent, any solution will be appreciated.
Thank you In Advance.
Regards,
Anand.

Hi Dave and Aman,
Really Thank you very much for your reply.
Explaining question more clear here.
Every product will have classification right! That is happening the same here that is , I have a object saying that 10 chars product will have some grouping{(Ex: ABCD Z) (this can be seen in the path sap menu legal->customs mgmnt->master data->maintain products->display->legal control tab)} ,for this 10 char prroduct i have to find 12,13 and 15 char products first(for example0010101213 ---10 chars product
0010101213S21---13 chars product
0010101213B1225--15 chars product ) and then check the grouping for these 12,13 and 15 products.
After that if there is no grouping for these 12,13 and 15 products, i have to assign 10 char product grouping to all three types of products.
that is the main requirement.
If not ths is clear please let me know.
My qyestion here is
1) how to find 12,13 and 15 chars product for a 10 char product for example
0010101213 ---10 chars product
0010101213S21---13 chars product
0010101213B1225--15 chars product
Thank you.
Best Regards,
Anand

How to find master data and atrribute

Similar Messages

Maybe you are looking for