HOW TO FIND MENU PATH FOR A TCODE

PLZ TELL ME HOW TO FIND MENU PATH FOR A TCODE .
I HAVE MADE A MENU ENHANCEMENT WITH TCODE +DW2.
IT MENU PATH IS NOT TRACEABLE.

Hi Madan,
It is in the transaction code S001.
Check my previous post on this.
It is not listed on the SAP Menu. Thats why SEARCH_SAP_MENU returns nothing...
Go to the Initial Screen and then type /n in the TCODE.
From there now type S001 to go to transaction S001.
The other ways do not work. Like combining both in a single step : "/ns001".

Similar Messages

Menu path for Configuration TCodes

Hi
I want to know menu path for creating bank key (TCode is FI01).
Also i want to know how to find menu path for configuration TCodes.
For enduser transaction, we can find menu path using SEARCH_SAP_MENU

the path is
SAP Menu > Accounting > Financial Accounting > Banks > Master Data > Bank Master Record > Create
and for any Tcode Go to SE93 and f4
you will find the list of t codes with descriptions
Hope it will help
Bilal

How to find Related Tables for the Tcode given.

How to find Related Tables for the Tcode given. (master data)
Thanks in advance.

Hi Sridhar,
Welcome to SDN.
The tables for a given transaction can be seen in the transaction SE80.
First goto SE93.
Give ur Tcode and find the program name.
Now goto SE80. select program in the first dropdown and give the program name in the second box. U can find the list of tables used.
One more way is : use ST05.
and One more is using FM 'get_tables'
Thanks,
Shailaja
Edited by: Shailaja on Jul 11, 2008 12:33 PM

How to find business object for particular tcode at particular event

Hi,
I want to know how i can find particular business object for particular tcode for certain event?
For example suppose for tcode PA40, if i create infotype for employee and when i save it after creating it then it must be stored in certain object. How i can find business object where all data realted to emp. get saved?
Thanks & Regards,
Parag

Hi Parag,
To get the business object for given transaction,
1) Go to transaction SWELS
2) Switch on the event trace.
3) Go to the given transaction (For which you want to know the business object)
4) Execute the transaction
5) Go back to SWELS and Switch off the event trace
6) Go to transaction SWEL.. Here you will get the Business Object name (one which starts with BUS)
Hope this will help you.
Best Regards,
Deepa Kulkarni

How can I find a bapi for perticular tcode?

hi,
How can I find a bapi for perticular tcode?
Thank you
ASHOK KUMAR

HI Ashok
If you mean that you need to know what BAPI's a particular tranx uses, which I can only assume that's what you mean, then you should access the code behind the transaction and search for 'CALL'. That normally is the standard method that think that most people use.
Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
1. Find out the package of the transaction.
Start Va01 go to system --> status.
Double click on transaction
Package is VA
Open this package in SE80
Open business engineering-->Business object types
Find the BO which sounds the most appropriate
I would suggest BUS2032 Sales Order
Double click.
Open methods.
Find the released method with from data or something similar in the name
, Createfromdat2
Position the cursor in it and click the program button
Scroll down to find the bapi used in this method
With this way you can also find out programs and FM's
2. Start va01 go to system-->status 
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order
createfromdat2
Regards
Preeti

Please reward for useful reply

How to find USER-EXIT for tcode - F110

I am new in USER-EXIT Please help   how to find USER-EXIT for F110
ASAP

Hi,
Enhancement/ Business Add-in            Description
Enhancement
RFFOX074                                Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075                                Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081                                Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082                                Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100                                Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101                                Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102                                Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103                                Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104                                user exit
RFFOX105                                Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200                                Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210                                Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211                                Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230                                General program for user exit RFFOX230 (in program RFFOJP_L)
RFFOX240                                Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250                                Enhancement for User Exit 250 (RFFODK_E)
RFFOX901                                Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902                                Framework for user exit RFFOX902 (in program RFFOM100)
FDTAX001                                Enhancement to Transaction FDTA (event after the download)
FEDI0002                                Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003                                Function exits for EDI docs in FI - Save PEXR segments
FEDI0004                                Function exits for EDI docs in FI - particular events
FEDI0006                                Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003                                Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041                                Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042                                Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043                                Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061                                Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062                                Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063                                Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064                                Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065                                Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066                                Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071                                Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072                                Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073                                Frame for user exit RFFOX073 (in program RFFOCH_U)
Business Add-in
FI_BSTM_MC_EXIT                         FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB                    F110: Check before scheduling a proposal/update run
No.of Exits:         36
No.of BADis:          2
Arunima

Menu path for factory calender. SCAL tcode

Dear all,
Please let me know the menu path for factory calender. SCAL tcode

Madhava
I cannot comment on Raghavendra's company's business policies.
User menus are user specific. SAP menu is generic (by default).
My personal opinion is that everyone should have full access to every branch of the standard SAP Easy Access menu. If you wish to prevent users from accessing certain transactions, it should be handled through standard auth objects, and not by 'hiding' branches of the SAP menu.
In most production systems, config change is locked down. Therefore, regardless of authorization, SCAL is only effective to VIEW calendars, and not CHANGE them in production. Pretty harmless, as far as I am concerned.
If your company wishes to add SCAL to a particular menu path, this can be done. In my company, this type of change is handled by developers.
Rgds,
DB49

How to find user exit for a perticular screen?

Dear all,
Can some one tell me how to find user exit for a perticular screen?
ex: MC88 screen can we figure out are there any user exit for that screen!!
Regards,
Vj

User exits are built into the Standard SAP code. You just activate them and insert your code into the include programs.
Here is a program that will list the user exits per transaction code. Not perfect, but it may help.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
        trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
      FORM get_data                                                 *
form get_data.
select single * from tstc
              where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
            where pgmid = 'R3TR'
              and object = 'PROG'
              and obj_name = tstc-pgmna.
if sy-subrc ne 0.
    select single * from trdir
             where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir
                     where pname = tstc-pgmna.
      select single * from enlfdir
                     where funcname = tfdir-funcname.
      select single * from tadir
                     where pgmid = 'R3TR'
                       and object = 'FUGR'
                       and obj_name eq enlfdir-area.
    endif.
endif.
select * from tadir into table jtab
             where pgmid = 'R3TR'
               and object = 'SMOD'
               and devclass = tadir-devclass.
select single * from tstct
          where sprsl eq sy-langu
            and tcode eq p_tcode.
endform.
      FORM write_list                                               *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
endif.
endform.
SMOD, is where you can find the system modifications provided by SAP. CMOD is where you will implement them. If you are looking for all the enhancements provided, then go to CMOD, follow the menu, 'Utilities-->SAP Enhancements'. This will take you to a screen where if you just execute it, you will get all the enhancements provided by SAP.
It is always difficult to find a user exit if all you have is a program name or a transaction code, unless you do a program like Rich suggested. But even there, you will not be able to find user exits that are implemented as sub-routines(also called forms not sapscript forms). Most of the user exits are documented under the corresponding task under IMG structure. So use transaction code SPRO, go to the IMG structure, choose the application area that your program or transaction might be and then you should find a task that talks about enhancements. If you execute that task most often it will take you to CMOD and sometimes to SE38. But all you want to know is there in the documentation attached to the task. Then you can go to CMOD and see which components are there.
Regards,
Amey

Menu path for MMPV

Hi experts,
Please tel me the menu path for MMPV.
For some of the thing i know the Tcode but i dont knoe the menu path.
In easy acess we can find by search_sap

Dear,
In SPRO screen, go the find filed and give your query definiton example: define period. System will give you the path as required.
Regards,
Prashanth Pai

Menu path for transactions

would someone please tell me how to find the menu path for any given transaction.
thank you

Hope below link is useful
http://www.sap-basis-abap.com/sapbs007.htm
Version 4.6C, 4.7 , ECC 5 & 6
Transaction code - search_sap_menu
Version 3.0x
go to transaction SE43
click Utilities - Global Search
Global search in area menu - key in '*'
Find - key in the transaction code you want to find
A list will be display. The line with the word Functions is the Main Menu.
Pls assign points as way to say thanks

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

Menu path - for goods receipt for purchase order (MB01)

Hi
What is the menu path for Goods receipt for purchase order (MB01) - ECC6.0

hi
the path is too deep
plz just log in ur system and find MB01
Materials Management > Purchasing > Master Data > Subsequent Settlement > Vendor Rebate Arrangements > Environment > Condition/Arrangement > Environment >Pricing > Environment Value assignment > Inventory management > Goods receipt >For purchase order > MB01 - PO number known
regards
KI

How to find print preview for purchase order like what we find in va03

hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank u

Hi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji

How to find condition type for a material???

How to find condition type for a material??

Hi Suman.
Refer the following
tcodes:http://www.tcodesearch.com/sap-tables/search?q=condition+types
and http://wiki.scn.sap.com/wiki/display/Snippets/Get?original_fqdn=wiki.sdn.sap.com
Please search for condition type with pricing condition/pricing procedure.
Regards,
Kannan

HOW TO FIND MENU PATH FOR A TCODE

Similar Messages

Maybe you are looking for