How to find minimum LMS release / patch to use starting a given equipements

Hello,
I'am looking for a way to find the correct (and minimum) LMS version to use starting a given equipement.
Objective is to know if my customer can still use it's current LMS release + patch or change to next major LMS version
I browsed tons of cisco documentation without finding a clear information
if someone can help !
Regards,

Hello Svetlana,
I did not have this link .
I'am not very familliar with cisco products but if i look at this link (LMS 3.2) : http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html#3.2table
and take the Cisco Catalyst WS-C6506 Switch for the sample, you will see that it does not appears in the LMS 3.2 matrix, but in the table 8 (switches) of LMS 3.0 section
What should be considered ? supported or not with LMS 3.2 ?
Thanks,

Similar Messages

Hi, I don't know how to find a specific security patch to apply to my Oracle database version to fix a vulnerability

Hi, I don't know how to find a specific security patch to apply to my Oracle database version 11.2.0.2.0 (on windows server 2003 32 bits) to fix the following vulnerability:
Risk: High
Application: oracle_tnslsnr
Port: 1521
Protocol: tcp
Synopsis:
It is possible to register with a remote Oracle TNS listener.
Description:
The remote Oracle TNS listener allows service registration from a remote host. An attacker can exploit this issue to divert data from a
legitimate database server or client to an attacker-specified system.
Successful exploits will allow the attacker to manipulate database instances, potentially facilitating man-in-the-middle, sessionhijacking,
or denial of service attacks on a legitimate database server.
Solution:
Apply the work-around in Oracle's advisory.
Thank you for your help

2835604 wrote:
Hi, I don't know how to find a specific security patch to apply to my Oracle database version 11.2.0.2.0 (on windows server 2003 32 bits) to fix the following vulnerability:
Risk: High
Application: oracle_tnslsnr
Port: 1521
Protocol: tcp
Synopsis:
It is possible to register with a remote Oracle TNS listener.
Description:
The remote Oracle TNS listener allows service registration from a remote host. An attacker can exploit this issue to divert data from a
legitimate database server or client to an attacker-specified system.
Successful exploits will allow the attacker to manipulate database instances, potentially facilitating man-in-the-middle, sessionhijacking,
or denial of service attacks on a legitimate database server.
Solution:
Apply the work-around in Oracle's advisory.
Thank you for your help
that sounds like the "tns poison" vulnerability. CVE 2012-1675 - Oracle Security Alert CVE-2012-1675
See MOS note 134083.1 and 1453883.1

How to Find Credit Check Released Sales Orders /Deliveries?

Hi Gurus,
How to Find Credit Check Released Sales Orders /Deliveries for a particular Customer.
Regrds,
Binayak
Message was edited by: Binayak
Binayak Ghosh

Hi,
You can chech inthe Tcode VKM2 Released SD documents, and VKM4 SD documents.
reward if useful
Regards
syed

CRM Release confirmation for billing (how to find out who released)

Hi All,
Does anybody know how to find out who released a confirmation for billing. Tx for releasing is /BEA/CRMB02. After releasing the confirmation for billing it will show up in /BEA/CRMB01. But there is no way to find out who released the confirmation since there is no change log. Or is there a change log?
Does anyone know the answer?

You will need to use 'grep' from the CLI of your appliance(s) in order to view the mail_logs and gui_logs. Use "released" in the mail_logs to get the timeframe of when the mails in question were released. (You may need to verifiy the MID for the mails in order to verify the particular ones in question.)
Enter the regular expression to grep.
[]> released
Then use 'grep' again to search the timeframe in gui_logs. This should display who carried out the action, or what userID they were logged in with --- showing "user:<userID>" in the log line.
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

How to find that which release is set to the plant

Hi,
I am having the plant name, but i don't have any other details. how to find the which release procedure is set for that one.Hpw to reach that link.
Regards,
Sydanna

Hey you can go to the release strategy in SAP SPRO>MM>PO->Release->Release startegy and can check for the PO class what is the release strategy and can check for plant as a charactestic what are the diffrent values for other parameters are maintained.
Dont forget to award points for the same.
Lekhram

How to find out the time when the ASE started?

Normally, ASE not reboot for production. Only for maintenance or performance tuning, maybe need to reboot ASE.
Question is how to find out the time when ASE was started?
one way maybe is check errorlog. Any more simple way no need to login to server OS?

Hi Kent,
In ASE 12.5 and up, you can do 'select @@boottime' For older releases, a general method is 'select crdate from sysdatabases where dbid=2'
1> select @@boottime, crdate from sysdatabases where dbid=2
2> go
crdate
Jul 15 2014 9:19AM Jul 15 2014 9:19AM
(1 row affected)
Cheers
Dan

How to find out that particular structure is used in which tables

Hello Friends,
Most of the times through techinal information we come to know the table name for a particular field.And in se16 when i give that table name than system says its structure and not the table.So in se11 when i give that structure name in database table field, its shows all the field in that structure, but not the data stored in that field.
So my question is how to find out that particular structure is used in which tables,so that i can view data stored in that structure?
Thanking you guys in advance.
Regards,
Jitendra

Dear,
When you click on the technical information it will give the structure name and field, double click on the structure and it will take you the display structure screen, there you will have the where-used List icon (Ctrl + Shift + F3) at the top , click on that and it will show the options, select Database tables and execute, it will give the tables related to the structure, you can explore the list of tables and find where your required field is stored in them.
Thanks & Regards,
Vijaya Bhaskar A

How to find out the Non Partitioned Tables used 2Gb on oracle

Hi team
how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system
regards

heres 1 I made earlier
set pagesize 999
set linesize 132
col owner format a25
col segment_name format a60
select owner,segment_name,segment_type,(bytes/1024/1024)"MB size"
from dba_segments
where owner not in ('SYS','SYSTEM','XDB','MDSYS','SYSMAN') -- edit for taste
and segment_type = 'TABLE'
having (bytes/1024/1024) > 2000
group by bytes, segment_Type, segment_name, owner
order by 4 asc

How to find where the below sql is used in database

Hi all,
I am tring to find the below SQL in our data base where it is used?
I had done the checking in all reports manually, But have no luck.
But i am sure that the below sql is in our data base and having some issue on it.
Can any one please let me know how to find where the below query is used in our database? I mean in packages/ triggers/ procedures or any where in our database
Please find the query
select count(sh.shipment_gid) from SHIPMENT sh, SHIPMENT_TYPE stp, LOCATION ld where (sh.shipment_gid in (select sstop.shipment_gid from SHIPMENT_STOP sstop where (sstop.appointment_delivery > trunc(TO_DATE(:1, :2), :3)) and (sstop.appointment_delivery is not null))) and (sh.is_to_be_held=:"SYS_B_0") and (sh.domain_name=:4) and (sh.insurance_policy_number like :"SYS_B_1") and (sh.perspective=:"SYS_B_2") and (sh.shipment_type_gid=stp.shipment_type_gid) and (sh.dest_location_gid=ld.location_gid(+)) and (stp.shipment_type_xid!=:5) order by ld.location_name, sh.start_time
Regards,
Dpk

There is video demonstration how to import from data dictionary.
After import you can select from the main menu: View->DDL File Editor menu item to open the DDL dialog and then click on "Generate" button on the dialog. When the DDL is generated you can search in it using "Find" button.
Ivan

How to find function module's and tables used for the particulat screen or TCODE?

Hello Nation,
I would like to know how to find the function modules and tables used for the particular screen or TCODE or program.
Example : I would like know the function module used in the program RDBGFT?
How can i find that?
Thanks in advance ,Awaiting your reply.

Make use of Find function with the keyword "CALL FUNCTION".
Make use of the same find function with the keyword "Select" to know the database tables used.
Regards,
Philip.

How to find out the plants and storage location for a given company code

hi
How to find out the plants and storage location for a given company code

Hi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore

How to set request number of info package using start routine

Hi All,
I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
Thanks
Sangita

You'll probably want to do this in a start routine. It is probably not advisable to hard-code the technical name of the InfoPak. They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
I would do a SQL select like this in a start routine, and then filter based on the results of the SQL. You'll probably want to sort the results by date and time, both descending. Or do a MAX in the SQL.
Please let me know if this isn't clear.
select q~rnr q~logdpid q~tdatum q~tuzeit
from rsreqdone as q
inner join rsldpio as p
on p~logdpid = q~logdpid
where p~objvers = 'A'
and p~logdpid like 'ZPAK%'
and p~source = 'your data source'

How to find what is the patch no for my BI java ?

Note 1330884 recommends to apply the BI Java patch Support Package 18 Patch 50 for SAP NetWeaver 7.0 BI Java to your BI system.
Two questions
1) I want to know how to find the patch no for my installation ?
2) where is the information for bi java ? Below is the component info from my BI system. I dont see any BI JAVA component here ?
thank you.
I got the below from : http://<system>:<port>/monitoring/ComponentInfo
Software Components
Vendor Name Version Provider Location Applied
sap.com ADSSAP 7.00 SP18 (1000.7.00.18.0.20081123153837) SAP AG SAP AG 20090515173903
sap.com BASETABLES 7.00 SP18 (1000.7.00.18.0.20081123154558) SAP AG SAP AG 20090515171425
sap.com BI-BASE-S 7.00 SP18 (1000.7.00.18.12.20090129073318) SAP AG SAP AG 20090518112357
sap.com BI-IBC 7.00 SP18 (1000.7.00.18.0.20081124051700) SAP AG SAP AG 20090515180641
sap.com BI-REPPLAN 7.00 SP18 (1000.7.00.18.0.20081125103147) SAP AG MAIN_APL70P18_C 20090515180729
sap.com BI-WDALV 7.00 SP18 (1000.7.00.18.0.20081125103146) SAP AG MAIN_APL70P18_C 20090515180651
sap.com BI_MMR 7.00 SP18 (1000.7.00.18.0.20081123154631) SAP AG SAP AG 20090515173946
sap.com BI_UDI 7.00 SP18 (1000.7.00.18.0.20081123154646) SAP AG SAP AG 20090515174042
sap.com BIWEBAPP 7.00 SP18 (1000.7.00.18.12.20090129073354) SAP AG SAP AG 20090518112351
sap.com BP_BIADMIN 60.1 SP5 (1000.60.1.5.0.20060118134900) SAP AG SAP AG 20090720155956
sap.com CAF 7.00 SP18 (1000.7.00.18.0.20081125143229) SAP AG MAIN_APL70P18_C 20090515174948
sap.com CAF-KM 7.00 SP18 (1000.7.00.18.0.20081125132429) SAP AG MAIN_APL70P18_C 20090515181229
sap.com CAF-UM 7.00 SP18 (1000.7.00.18.0.20081125143246) SAP AG MAIN_APL70P18_C 20090515174049
sap.com CORE-TOOLS 7.00 SP18 (1000.7.00.18.0.20081123154839) SAP AG SAP AG 20090515171444
sap.com EP-PSERV 7.00 SP18 (1000.7.00.18.0.20081217162400) SAP AG SAP AG 20090515180804
sap.com EP-WDC 7.00 SP18 (1000.7.00.18.0.20081113110900) SAP AG SAP AG 20090515180833
sap.com EPBC 7.00 SP18 (1000.7.00.18.0.20081123205100) SAP AG SAP AG 20090515174158
sap.com EPBC2 7.00 SP18 (1000.7.00.18.0.20081123205100) SAP AG SAP AG 20090515180835
sap.com JLOGVIEW 7.00 SP18 (1000.7.00.18.0.20081123152100) SAP AG SAP AG 20090515171508
sap.com JSPM 7.00 SP18 (1000.7.00.18.0.20081123152100) SAP AG SAP AG 20090515110509
sap.com KM-KW_JIKS 7.00 SP18 (1000.7.00.18.0.20081123155108) SAP AG SAP AG 20090515174202
sap.com KMC-BC 7.00 SP18 (1000.7.00.18.0.20081124023400) SAP AG SAP AG 20090515180855
sap.com KMC-CM 7.00 SP18 (1000.7.00.18.0.20081124045000) SAP AG SAP AG 20090515180911
sap.com KMC-COLL 7.00 SP18 (1000.7.00.18.0.20081124050800) SAP AG SAP AG 20090515180926
sap.com LM-PORTAL 7.00 SP18 (1000.7.00.18.0.20081125133231) SAP AG MAIN_APL70P18_C 20090515180928
sap.com LM-TOOLS 7.00 SP18 (1000.7.00.18.0.20081218100553) SAP AG MAIN_APL70P18_C 20090515175236
sap.com NET-PDK 7.00 SP18 (1000.7.00.18.0.20081124003300) SAP AG SAP AG 20090515180432
sap.com RTC 7.00 SP18 (1000.7.00.18.0.20081124050800) SAP AG SAP AG 20090515180434
sap.com RTC-STREAM 7.00 SP18 (1000.7.00.18.0.20081124050800) SAP AG SAP AG 20090515180930
sap.com SAP-EU 7.00 SP18 (1000.7.00.18.0.20081125133807) SAP AG MAIN_APL70P18_C 20090515181146
sap.com SAP-JEE 7.00 SP18 (1000.7.00.18.0.20081123155510) SAP AG SAP AG 20090515171540
sap.com SAP-JEECOR 7.00 SP18 (1000.7.00.18.1.20090120111509) SAP AG SAP AG 20090518112033
sap.com SAP_JTECHF 7.00 SP18 (1000.7.00.18.1.20090120111547) SAP AG SAP AG 20090518112036
sap.com SAP_JTECHS 7.00 SP18 (1000.7.00.18.1.20090120111716) SAP AG SAP AG 20090518112429
sap.com UMEADMIN 7.00 SP18 (1000.7.00.18.0.20081125103148) SAP AG MAIN_APL70P18_C 20090515175248
sap.com UWLJWF 7.00 SP18 (1000.7.00.18.0.20081124030000) SAP AG SAP AG 20090515180944
sap.com VCBASE 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181246
sap.com VCFLEX 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181231
sap.com VCFRAMEWORK 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181234
sap.com VCKITBI 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181248
sap.com VCKITGP 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181250
sap.com VCKITXX 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181252
sap.com WDEXTENSIONS 7.00 SP18 (1000.7.00.18.0.20081125134217) SAP AG MAIN_APL70P18_C 20090515181322

Manoj,
Thank you. I can see in jspm (release.splevel.PATCHlevel). But which component is the BI JAVA ? I done see any component by that name in jspm !!!
I can see a sap.com/SAP_JAVASL. Is this the one ?
Anil , Royi,
I know I am on netweaver 7 and sp 18. I want to know PATCH NO. Pasted above is the component info. Where is the java PATCH information ?
Does ADSSAP 7.00 SP18 (1000.7.00.18.0.20081123153837 mean
release 7
sp 18
patch 0
thank you.

How to find out the Release date & Release code of PO's ?

Dear All,
Is there any standard reports available to find out the Release date & Release codes of PO's which are already released & the PO's which are pending for release ?
Regards,

HI All,
Thanks a lot for your response.
In ME2N,ME2M etc..I have to select each single PO line item & then have to go to Header Changes to find out this info.
So, Is it possible to find out the release codes/release date of all the PO's in a single shot?
Hope my query is clear.
Thanks & Regards,

How to find out who released an encrypted email in ironport? C160 Appliance

Hello,
We have quite a few users who can release emails. We need to find out who released an encrypted email. When we track the encrypted message through message tracking it shows it was manually released but no credentials are provided. I checked the help command for any useful commands when I ssh'd but nothing seemed useful. Last, findevent, nothing showed who released it.
Does anyone have any ideas?

You will need to use 'grep' from the CLI of your appliance(s) in order to view the mail_logs and gui_logs. Use "released" in the mail_logs to get the timeframe of when the mails in question were released. (You may need to verifiy the MID for the mails in order to verify the particular ones in question.)
Enter the regular expression to grep.
[]> released
Then use 'grep' again to search the timeframe in gui_logs. This should display who carried out the action, or what userID they were logged in with --- showing "user:<userID>" in the log line.
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

How to find minimum LMS release / patch to use starting a given equipements

Similar Messages

Maybe you are looking for