How to find mounted path of Adobe Drive?

Hello,
I want to find out mounted path(on mac) of Adobe Drive 4 on client machine from inside of my plugin code and want to write it to some properties file. I am not able to find any API to do this.
Can someone please help? Its urgent....
Thanks.

On Mac it's under "/Volumes/my_dam_server_name"

Similar Messages

How to change Cache path of Adobe Drive manually?

Hi there,
i have a problem with one of my clients running Adobe Drive 2.1. The Operatingsystem Username of the Standard User on the Client computer was changed (MAC OSX) and now Adobe Drive links its cache file to the old user profile folder. If i try to change it in the Drive settings, it says something like "cannot be done, try again later". Think it must be a rights problem. Tried different ways with new users in the system, drive reinstllation with deletion of preferences a.so. still with the same result, i can't change the path to the cache folder in Adobe Drive and this prevents me from logging in to the cmis server. So the client can't use the Connector and Bridge to handle the connection to the cmis server - a bit unhandy
I think there must be a file in which the cache path of Adobe Drive is hardcoded, but i haven't found the correct file yet (looked in the package contents of Adobe Drive via the Mac Finder). Can you give me a hint, where i can find the cache-path entry?
Many thanks.
best regards,
Volker

Hi LUXMEDIA,
To change cache path manully, please follow the below steps:
Assuming that the original cache location is /User/userA/Library/Application Support/Adobe/CS5ServiceManager/diskcache, the new cache location is /User/userB/Library/Application Support/Adobe/CS5ServiceManager/diskcache
1. Quit Adobe Drive, and kill CS5ServiceManager
2. Copy files under /User/userA/Library/Application Support/Adobe/CS5ServiceManager/diskcache to /User/userB/Library/Application Support/Adobe/CS5ServiceManager/diskcache
3. Launch Terminal, input the following commands:
3.1 cd /User/userB/Library/Application Support/Adobe/CS5ServiceManager/configuration
3.2 ls -al
you will see .settings folder
3.3 cd .settings
3.4 ls -al
you will see a file with the name org.eclipse.core.runtime.preferences.OSGiPreferences.11.prefs
3.5 vi org.eclipse.core.runtime.preferences.OSGiPreferences.11.prefs
change 'system/cache_location' value to '/User/userB/Library/Application Support/Adobe/CS5ServiceManager/diskcache'
4. Relaunch Adobe Drive, go to settings panel, you'll see that the cache path has been updated.
Thanks,
Hui

HOW TO FIND MENU PATH FOR A TCODE

PLZ TELL ME HOW TO FIND MENU PATH FOR A TCODE .
I HAVE MADE A MENU ENHANCEMENT WITH TCODE +DW2.
IT MENU PATH IS NOT TRACEABLE.

Hi Madan,
It is in the transaction code <b>S001</b>.
Check my previous post on this.
It is not listed on the SAP Menu. Thats why SEARCH_SAP_MENU returns nothing...
<b>Go to the Initial Screen and then type /n in the TCODE.
From there now type S001 to go to transaction S001.</b>
The other ways do not work. Like combining both in a single step : "/ns001".

How can find software to install lbp3010b driver, how can find software to install lbp3010b driver

dear all, how can find way to install software driver for lbp3010b, thanks.....

contact makers of stuffilt deluxe http://www.stuffit.com/about/contact.html

How to find a path in Application server?

Hi,
I have a reqirement that i need to download the original document which is attached in the DIR links for each line item in the PO.
Say for Eg. user is uploading the original document in CV03n.
Through program i have to download it and save it in local desktop.
But as per my concern when user uploads that document in CV03N, it should get updated in application server.
I wants to know how can i find that path through the document got updated in AL11.
Please let me know if you have any idea on this.
Also please let me know if my question is not clear.
Regards,
Prabu

Hi Prabu,
It depends on how DMS is implemented in your place.
If DMS is implemented along with CONTENT SERVER, then the actual document uploaded is stored in CONTENT SERVER and only a link is saved in SAP DB and whenever you refer to this link the image is being retrieved and displayed.
If you dont have content server then the uploaded documents are stored in your application server only. Generally the big companies which implement DMS do have a content server otherwise DB size will grow enormously in no time.
Once you check out the basics of ur requirement, then search through FM's available related to DMS.
Hope this answer helps.
Regards,
Lakshmi Narayana

How do I mount my internal hard drive?

Can anyone tell me how to mount my internal hard drive? I have a macbook air late 2010 model. 128gb flash storage. I was having problems because it would freeze on me after sleep. I ran disk utility and repair disk. It says everything is fine. But it is unmounted. Clicking on mount didn't do it. I already backed it up before it was unmounted. I did the hardware test too. It said there were no hardware issues. I see the apple brand hd but the "macintosh Hd" is grayed out. Please help!

Try doing this:
Drive Preparation
1. Boot from your Snow Leopard Installer flash drive. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

How do I mount a second hard drive in Beige G3 its listed in the profiler

Inherited a 300 Mhz Beige G3 with 6 GB system drive running OS 9.2.2
Has a card in SCSI Bus 1 with IDE drive cable. I have installed a 60 GB drive on the sled and the system profiler recognizes it as Mac OS Extended, but says the drive is not mounted.
Hate to be stupid in front of so many people but, how do I mount the drive.. the profiler is the only place it shows up?
Also has a Firewire/USB card in PCI slot 1. Any chance firewire or USB will actually work?
I eagerly await your responses.

Some PCI-slot Drive Controller cards report to the System they are SCSI Controllers to be able to use the more mature and flexible SCSI drivers with "Logical Block Addressing" instead of the older "Track-Head-Sector" addressing. Track-Head-Sector has not worked for so long the drives are all faking that they have 32 or 64 heads, even in drives only 9 mm tall.
These Controllers can then support up to two drives, often larger than 120 GB each, on each of two cables, if they have places to plug them in.
One problem is that if you format it in OS 9 on the motherboard-attached cable, you only get the ATA/IDE driver. If you want to move the drive to the card later, you really do need the SCSI driver on it, so it must be reformatted while attached to the PCI card.
If you have an OS 9 CD, a later version of OS 9 Drive Setup can be found in the Utilities folder on the CD. You need not boot to the CD or install to use it, just insert the CD, and when it mounts on the desktop, open the Utilities folder and double-click Drive Setup.
Mac OS X will usually format all major brands and many obscure ones. If you check the checkbox for "Install Mac OS 9 Drivers" you get the OS 9 IDE/ATA driver, the SCSI driver, and the IDE/ATA in FireWire Driver ALL installed.

How to find full path

Hi,
how to find the directory total path where my java programm is running programatically?
thanks in advance....

hi,
Try
System.out.println("Working directory: " + new File(".").getAbsolutePath());
Anil.
Developer Technical Support
Sun Microsystems Inc,
http://www.sun.com/developers/support

How to find Brows() path?

I am working with flash.net.FileReference, I am using the brows function, and I know how to find the chosen file name, but I need the whole path, now how can I do that?

So I can use images from my user machine directly insteed of
uploading/downloading them.
2009/8/24 p_m_williams <[email protected]>
This information is not available on FileReference. As far as I know it
is for security reasons. What do you need the path for?
>

How to release Compound Path in Adobe illustrator javascript

Hi,
How to release Comound path with java script

Thanks For answer
Actually i want to take .PNG image for compound path Items.
But when i release compound path Items then it is break in small small object.
When i save compound path items separately it saved as a blank image...
What am i do now.

How to find Application Path

Hi
How to get Application Path from form module (Any Built Ins)

Hi,
declare
curform varchar2(100);
begin
curform:=get_application_property(current_form);
end;
hope it helps u..
navneet jain
[email protected]

How to find the path of a PDF sent for email review

Hi everyone
We have a problem where the path linking an email review to the original source document has been changed. The emailed comments do not prompt the user to merged the comments with the original file.
I assume there must we some way to identify the original file path so that it can be reinstated.
Can anyone help us find this path information?
Thanks
Suze

How about:
URL url = ClassLoader.getSystemResource("testfile.txt");
if (url == null) {
System.out.println("not found");
} else {
System.out.println(url.getPath());
}

How to find complete path of a file in computer by java

Hi frens !!
i want to have a simple java program which takes the input file name say one.html and yields the complete path of the that file ,which is already stored somewhere in computer.
my problem is that i am not getting the method in java ,which could do the same.i am using jdk 1.4.
Thanks
Allwyn

simply PATHETIC !!!
btw thanks for advise.The options are:
- Search your computer manually for the file, TELL your code where it is by typing in the path.
- Have some operating system tool (e.g. Windows Explorere) search your hard drive for you. When it finds it, TELL your code where it is by type in the path.
- TEACH your code how to search your entire computer, all hard drives, all directories, for the file by that name.
- Create a new file by that name, either in the 'current' directory (which it appears you alraedy have), or some other path you give it.
- go hungry

How could i mount the usb image drive at the desktop?

i'm using Lion and since my new computer has arrived I got a little disapointed! First, and at least for me the more awful issue, the image of a pluged usb drive DO NOT appear at desktop!!!!!!!!!!!!!!!!!!!!!! how could that happen? it was a very usefull treat! my hope is my ignorance: i think i'm not dealing properly with my new computer, i really hope there is a hidden way to activate that!
second: why **** the quickplayer DO NOT recognise subtitles? every time i try to watch a movie with subtitle the quicktime closes and the quicktime 7 opens!
third: why activity monitor DO NOT show the right disk free space? even erasing huge files the available free space is frozen! do not increase!
sorry for my english mistakes!

Thanks for the reply. I was able to save the data on the Macbook Air whose HD got corrupted by using File Sharing (ethernet connecting two Macbook Airs).
I am also going to make a disk image of the HD using Disk Utility and mount that Disk Image onto an external hard drive. That way I can save the hard drive contents.

How to create mount point from external drive directory

Hi,
Is it possible to create a mount point pointing directly to an external drive directory?
For example I would like to have /Volumes/Media point to my external eSATA drive /eSATA/Media
What I am trying to achieve is that I can see a virtual drive in Finder called "Media"
This is important because when this external drive is connected on my NAS Server the /eSATA/Media directory
shows up as a mounted drive called "Media" alse (through afp).
What I want is to see "Media" pointinf to /eSATA/Media regardles if it is connected directly to my MacBook or connected on my NAS.
Thanks for your help.
JM

Hi,
Is it possible to create a mount point pointing directly to an external drive directory?
For example I would like to have /Volumes/Media point to my external eSATA drive /eSATA/Media
What I am trying to achieve is that I can see a virtual drive in Finder called "Media"
This is important because when this external drive is connected on my NAS Server the /eSATA/Media directory
shows up as a mounted drive called "Media" alse (through afp).
What I want is to see "Media" pointinf to /eSATA/Media regardles if it is connected directly to my MacBook or connected on my NAS.
Thanks for your help.
JM

How to find mounted path of Adobe Drive?

Similar Messages

Maybe you are looking for