How to find my restore password for ipad

Hi, hoping someone can help with a small situation, my son while apparently showing off what the ipad can do with a few friends managed to reset the thing. wont lull you to sleep whit his seemingly sensible at the time reasoning, suffice to say I now have two choices reload a years worth of information manually or restore from a previous back-up. my last save was at the begining of august and since then have had to use the good old command R trick,(another by junior still gotta love the kid ) so my password was saved on a now deleted hard drive and was hoping to somehow bypass or redo the pass word to save a little time. is it possible or am I on a seek and find through my app library?

is it an itunes encrypted backup password?  if so see this
http://support.apple.com/kb/TS5162
or is a passcode lock? do this
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone.  do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

Similar Messages

  • Restore password for IPAD

    restore password for IPAD
    Как восстановить пароль для IPAD, если его забыл?

    I hope that you can translate.
    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    Instructions can be found here.
    http://support.apple.com/kb/ht1212
    You may have to use recovery mode if that didn't work.
    http://support.apple.com/kb/ht4097

  • How  to   find  article based  support  for  ipad  or  technical notes

    how  to   find  article based  support  for  ipad  or  technical notes

    The problem comes from VBUK/VBUP which are the control tables for most of SD tables (from VBAK/P to LIKP/PS and VBRK/P) and manage uniqueness of id in the module (and stores statuses). Even item tables don't refer to their header but both refer to the same VBUK record.
    e.g.
    LIPS : VBELN/POSNR -> VBUK/VBUP -> but you will only find LIKP/PS itself and no record in VBAK/VBAP
    LIPS : VBELV/POSNV -> VBUK/VBUP -> you should find VBAK/VBAP
    The table VBFA "Sales Document Flow" manages the relations from/to between two different SD documents which exist in VBUL/P and in only one other table depending on type of document. (Also note that the exact relationship may sometimes be modified to some extent by Customizing SD.)
    As Katan wrote, look for views defined in ddic, look also at logical databases (SE36) like VLV.
    You can also find valuable information in OSS notes/documents like 185530 - Performance: Customer developments in SD.
    Regards,
    Raymond

  • How to find a restore dvd for MacBook Pro A1278

    I will be helping my neice with a MacBook Pro,13-inch, Mid 2010, with a failed hard drive. (She tells me that the the system does not recognize the hard drive.) I have a SATA hard drive we can use, but she can not find the original restore dvd.  How can I find a replacement?      
    Any other suggestions on how to proceed?
    Thanks.

    Phone AppleCare and order replacements. You'll need the computer's serial number and a credit card number.
    (100875)

  • How can I set a password for my pictures on iPad Air ?

    How can I set a password for my pictures on iPad Air ? if anyone have my iPad access mail or something I don't want anyone access my photos so how can I set it up.

    You can't set a password for the Photos nor Mail apps, you can only set a passcode for your iPad as a whole (via Settings > Passcode).
    There are third-party photo management apps such as Photo Manager Pro which you can copy your photos into from the Photos app (and then delete them from Photos), that app allows you (via its settings within the app) to set a password to access it.
    For email you could access your email via a browser (and not have your password stored in the browser), or see if there are any email apps in your country's app store which have a password option

  • HT2204 how do i get my password for BJ282 on my new mini ipad?

    How do I get my password for BJ282 on my new mini ipad?

    Apple ID Security -
    Telephone Apple Care for your country and ask for the Account Security Team, then request help resetting the password.

  • How do I find out my password for my work Outlook account?

    As the subjects says How do I find out my password for my work Outlook account?
    I'm trying not to have to contact IT to find this out too

    Sorry, but you can't. You're stuck contacting IT.

  • How do I find out my password in iPad mail?

    How do I find out my password in iPad mail?

    Check with whoever is your mail service provider.

  • Forgot privacy password for ipad

    forgot privacy password for ipad how do i unblock it

    If you mean you forgot your four digit passcode, you will have to restore by attaching to iTunes on a computer via the recovery mode, instructions are in http://support.apple.com/kb/HT1212

  • HT1766 is there a way around the restore password for backup through I tunes if you cant remember your password?

    I cannot remember my password from 2 months ago for a back I want to restore to .Is there a way around this? I have already begun the process and am stuck at  this point. Help please...

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT4623 forgot password for ipad

    how do i change my forgotten password on my ios 7

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to find out the password of system?

    Dear all,
    I would like to know how to find out the password of system as I forgot it?
    Thanks a lot
    Francis SZE

    Since oracle passwords are encrypted so you cant see actual password. But you can use following procedure to login to oracle with system user.
    For any account issue this statement.
    select username,password from dba_users where username='SYSTEM';
    EMDU27ANS729273
    this will give you the password in encrypted format.
    Now you can change that password for temporary purpose.
    alter user system identified by test;
    Now login and do your work.
    After login you can issue this statement to reset the password to its original value.
    Alter user system identified by values 'EMDU27ANS729273';
    You have to enter the same encrypted password in the quoted string which you had found in 1st statement.
    Cheers.

  • How do I get the password for an old apple id, when I don't have access to that old email address, and it doesn't recognize my birthdate?

    How do I get the password for an old apple ID when I dont have access to the email address and it does not recognize my birthdate?

    Hi Attila528,
    Thanks for visiting Apple Support Communities.
    If you are not able to receive a rescue email to reset your security questions and password:
    You'll need to contact iTunes Store support to have your questions and answers reset.
    You can find the article with this information here:
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    After your password, security questions and answers are reset, I'd recommend providing a new rescue email address:
    You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
    Navigate to My Apple ID using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    All the best,
    Jeremy

  • How to diable power on password for hp pro 3420 all in one

    how to disable power on password for hp pro 3420

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this HERE.
    HP Pro 3420 All-in-One PC Support Page
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How to i lock with password for my contacts folder in ipad3

    how to i lock with password for my contacts folder in ipad3

    You cannot lock specific applications or folders, but you can set a passcode on your iPad:
    Setting a Passcode on an iOS Device

Maybe you are looking for

  • 16:9 aspect ratio - export to DVD

    We want to produce some DVDs in 16:9 which play on a widescreen TV properly ie filling up all the screen and not warped in any way. also we would like the DVD to play on a regular 4:3 TV as letterboxed, and on a computer as 16:9 We filmed the product

  • Tree drag initiation, replace 'treeItems' format

    When dragging an item from a tree, I'd like to change the format of the dragSource from 'treeItems' to a custom format. There are plenty of examples that show how to do it for a non-drag enabled component like a label using DragManager.doDrag (ie cre

  • New iPad 2 won't bring up log on pages when I sign on to hotel wifi networks. Is there anyway to "refresh" Safari so it looks for the log on page?

    Have had new iPAD 2 for a month now- about 90% of the time it won't sign on to wifi networks that require a log on page - it simply won't bring the log on pages up and I haven't figured out anyway to make it do so - I have tried rebooting, turning wi

  • Msi usb mp3 player i/o error

    i recently connected my megastick usb mp3 player and windows diaplyed a window that says: the request could not be performed because of an i/o device error. Now i can not store files to my usb mp3 player. How do i fix this problem???

  • CS5 Crop Tool Presets Not Working - HELP!

    I am using CS5.  The Photoshop crop tool presets are not working.  For instance, if I use the Preset 8 inch x 10 inch and drag on an image which is say 12 x14 the crop does not stop at 8x10 but continues on to cover the whole image OR it covers only