How to find next requirement from MRP for 2 week or a month.

Dear Sir,
My client is required to have reqirement of mateial for next 15days. So that buyer should concentrate on PR or PO.
Please guige me for the same. Thanks in advance.
Regards,
Sanjay

Hi Sanjay,
If this is for SBO, you want to post in the correct forum.
Heather

Similar Messages

  • How to find next number range for project definition in tcode CJ20N

    Hai Experts,
          Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
    Note: I searched in forum before posting, but couldn't find the solution.
    Thanks
    Regards,
    Prabu S.

    Hi,
    For project defination internal number is assigned by system.
    When you saves's project then system allocate one number to project defination, you can view it,
    SE11 >>> table  PROJ >> Click on contents >>> execute,
    here you will get your project defination & number is assigned to project defination.
    kapil

  • How to find the exact user exit for our requirement?

    Dear Mr. keerthi,
    can you please explain me how to find the exact user exit for our requirement?

    Hi sandip
    There is more than one method in which you can check for user-exits.The following method is used very often.
    <b>How to find the exact user-exit for your requirement.</b>
    1.     You can check the user exists using transaction SE85.
    2.     Repository Information System -> Enhancements -> Customer exits
    3.     You can search the user-exits by package name.
    4.     Double click on each exit name to check the function module exits.
    <b>The procedure to find the package name.</b>
    Execute transaction SE93 
    Enter the tcode of the transaction for which you want to check the user exit.
    Example: if you want to find the user-exit for purchase orders while changing, enter ME22n  and press display.
    You will get to see the package name
    But you need to confirm that the user exit will get triggered at the appropriate event.
    ( example: you might want some validations to be done ON SAVE of a purchase order)
    <b>Checking if the user-exit is getting triggered or not.</b>
    1.     Open the user exit function module (that you have got in step 4) in Tcode SE37.
    2.     Click on where used button. In the pop up that immediately appears choose only programs .
    3.     You will get a list of programs. Double click on the program name.
    4.     You will get the list of location where this function module user exit is used.
    5.     Place session break points at each of these location ( at each CALL FUNCTION statement)
    6.     Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
    regards,
    Prasad

  • How to find and install right java for ECC6 intstallation on AIX5.3

    Hello
    I wander how to find and install right java for ECC6 intstallation on AIX5.3. I went thruroughly thru note 723909 and underlying 716927, 1008311 and 1039948 notes but I still do not understand.
    I guess I should logon to IBM site http://www.ibm.com/developerworks/java/jdk/aix/service.html
    where I can choose :
    " Java 1.4.2 64-bit "
    and then :
    "64-bit SDK 1.4.2 base images (at 1.4.2.0 level; in installp format) "->"Base SDK (required)
    Java14_64.sdk.tar  ((50001920)
    then I assume (on AIX ) I should "tar xvf Java14_64.sdk.tar".
    then I get extracted "Java14_64.sdk"
    Is this ok?
    I know on Linux(
    from IBM site I downloaded "IBMJava2-amd64-142.rpm"
    then I issued
    "rpm -i IBMJava2-amd64-142.rpm "
    and finally issued
    "export JAVA_HOME=/opt/IBMJava2-amd64-142")
    What in case of AIX5.3? Could you help me?

    I was told to use smitty (just I am not familiar with it). furdermore i do not hace read.me file. the ziped files are:
    Java14_64.ext
    -rw-rr 1  202 bin    371712 Mar  2  2010 Java14_64.license
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.ja_JP
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.Ja_JP
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.ko_KR
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.zh_CN
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.Zh_CN
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.zh_TW
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.Zh_TW
    -rw-rr 1  202 bin   4888576 Mar  2  2010 Java14_64.samples
    -rw-r----- 1 root root 67190784 Oct  4 09:53 Java14_64.sdk
    -rw-rr 1 root root 77370639 Nov 20 19:36 Java14_64.sdk.tar.gz
    -rw-r----- 1 root root 12612608 Oct  4 09:53 Java14_64.source

  • HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02

    hi
    HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02.
    i want to display this field in my report. what is the fieldname and in which table it is ?

    Hi Jyothsna,
    There are 2 dates when you say Requested Delivery Date
    1.  Header level in VBAK-VDATU is the field
    2.  At item level it is in the schedule line. VBEP-EDATU.
    The relationship between item (VBAP ) and schedule line ( VBEP )is 1 to many. But there will be mutiple schedule lines only if you are using the scheduling functionality. Also note to check for confirmed quantity (VBEP-BMENG) to be greater than 0 and use that schedule lines EDATU date as Requested delivery date.
    regards,
    Advait Gode.

  • MD04 - How to create a requirement in MD04 for a scheduling agreement

    Hi,
    Pls advice How to create a requirement in MD04 for a scheduling agreement. pls mention the steps and t codes.
    thanks in advance.

    Hi Prajit,
    Sales people will create sales scheduling greements through VA31 T-Code (normally for finished products).In that they define forecast schedules as well as JIT schedules.After creation, these will be appeared in MD04 screen as requirement for that finish material.
    In MRP run,system will create procurement elements (planned orders for example) for these requirements.
    Regards,
    Raja.

  • How to find print program from script

    Hi,
    How can i find the print program from the script .
    i unable to find in TNAPR table.
    thanks,
    srii

    Hi Sridhar,
    U can find in NACE transaction.
    Please check this link
    search print program and sap script
    with po no how to find script and  print program for that  po.
    Best regards,
    raam

  • How to find whether MIRO is done for a PO

    Hi All,
    Is there any indicator attached to POs that indicates whether MIRO is done for that PO?
    I mean after PO creation in ME21N -> GR in MIGO -> Excise (if applicable) and -> MIRO... how to find whether MIRO is done for a particular PO?
    Helpful tips will be gratefully rewarded...
    Regards,
    Karthik

    See if an entry exist in EKBE for the PO Number and its items.
    The complete process though is, to find the GR Quantity for each PO Item and see if it matches with the PO Item quantity.
      SELECT EBELN
             EBELP
             MENGE
             LOEKZ
        FROM EKPO
        INTO TABLE LT_EKPO
       WHERE EBELN = P_EBELN.
      IF NOT LT_EKPO[] IS INITIAL.
        SELECT EBELN
               EBELP
               MENGE
               BEWTP
               GJAHR
               BELNR
               BUZEI
               SHKZG
          FROM EKBE
          INTO TABLE LT_EKBE
          FOR ALL ENTRIES IN LT_EKPO
         WHERE EBELN = LT_EKPO-EBELN
           AND EBELP = LT_EKPO-EBELP
           AND VGABE = '1'.
      ENDIF.
      LOOP AT LT_EKBE.
    * Change the sign of the quantity for debit
        IF LT_EKBE-SHKZG = C_SHKZG_H.
          LT_EKBE-MENGE = -1 * LT_EKBE-MENGE.
        ENDIF.
        MOVE-CORRESPONDING LT_EKBE TO LT_EKBE_SUM.
        COLLECT LT_EKBE_SUM INTO LT_EKBE_SUM.
        CLEAR LT_EKBE_SUM.
        ENDLOOP.
       loop at it_ekpo.
    ** For each line item, calculate the total GR Quanity
        READ TABLE LT_EKBE_SUM WITH KEY EBELN = LT_EKPO-EBELN
                                        EBELP = LT_AWKEY-EBELP.
        IF SY-SUBRC = 0.
    * If the PO Item Quantity is equal to GR Quantity
            IF LT_EKPO-MENGE <= LT_EKBE_SUM-MENGE.
    * The PO Item can be considered completed GRed
            ENDIF.
        ENDIF.
      ENDLOOP.

  • How to find the profit center group for a profit center?

    How to find the profit center group for a profit center?

    Hi,
    try this also
    In order to pass the setid parameter of the FM, you have to concatenate the following things
    Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
    In my example below, I have declared as constants and concatenating to gv_setid.
    gc_01016 is the set id for profit centers
    gc_kokrs is the controlling area
    gp_pprct is the Profit Center group entered in the selection screen.
    You will get KOKRS value from the cepc-kokrs.
    data :   gc_0106(4)   TYPE c VALUE '0106',
               gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
               gv_setid          LIKE sethier-setid,
               gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
      CONCATENATE gc_0106  gc_kokrs gp_pprct INTO gv_setid.
      CONDENSE gv_setid.
      CALL FUNCTION 'G_SET_TREE_IMPORT'
        EXPORTING
          client                    = sy-mandt
          fieldname                 = 'RPRCTR'
          langu                     = sy-langu
          setid                     = gv_setid
          tabname                   = 'GLPCT'
          no_table_buffering        = 'X'
        TABLES
          set_values                = gt_set_values_1
        EXCEPTIONS
          set_not_found             = 1
          illegal_field_replacement = 2
          illegal_table_replacement = 3
          OTHERS                    = 4.
    By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
    Regards,
    Venkatesh

  • How to find a Transport Request no for Task or Workflow Template

    Hi All,
    Any body tell me.
    How to find a Transport Request No for Task or Workflow Template.
    Thanks,
    Lakhshmi.

    Hi.
    Next to the options already mentioned you can also try transaction SE03.
    Select: Search for objects in Requests/Tasks.
    Next, fill an empty line with the objectnumber you want to search (don't forget the checkbox).
    For workflow tasks use the object type PDTS, for workflow templates use PDWS.
    Kind regards,
    Jasper Blok

  • How to find the E-Mail address for my HP 6700? Printer shows E-Print connected.

    I got help on the board about getting a new printer code and the Home Printer page shows that it is on, but now I don't know how to find the E-Mail address for my computer -
    This question was solved.
    View Solution.

    Hi,
    From the printer Front panel, navigate to Setup. Locate and enter Web Services. Aprove any of the steps to enable the service... allow the device several minutes to complete the registration, a page will print automatically with the printer code and the directions to select the email address from hpeprint.com.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How To Find Opening Stock And Value For a Material

    Hi Experts,
    How To Find Opening Stock And Value For a Material  in Given Dates
    Moderator Message: Search.
    Edited by: kishan P on Sep 15, 2010 4:05 PM

    Thanks For Answering.....
    But I Need Any Function Module To Get Opening Stock And Value For Given Material With in Dates.

  • How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

    Hi all,
    I am new to this community p
    i have issue regarding  the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
    thanks,

    Hi ,
    welcome to SDN.
    You can select the appropriate Customer exit accrding to the available parameters .
    The list of exits available are 
    EXIT_SAPLVEDF_001
    EXIT_SAPLVEDF_002
    EXIT_SAPLVEDF_003
    EXIT_SAPLVEDF_004
    For Example , if you want  to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
    Hope this Helps
    Rgds
    Sree
    Edited by: Sree on Jul 23, 2010 12:11 PM

  • How to find that a sales order for which there is  delivery but no goods

    Hi
    How to find that a sales order for which there is  delivery but no goods issue has been done i.e we have an open delivery for a sales order.
    How in VBUK table can we find  out with the sales order no .
    Thanks in advance

    make use of table VBFA.
    Regards
    Peram

  • How to find delete message from iphone

    how to find delete message from iphone?

    I am afraid that I don't think there is a way to do this.

Maybe you are looking for