How to find open connection in application server

how find out how many request are hit in applcation server and reuest comes from which computer. if there r any solution plz give post the ans.

You could start reading the access logs of apache....
or check the server-status page...
or check in EM-website....

Similar Messages

Can any one tell me how to write open hubs to application server?

Hello Everone,
I created open hubs and my requirement is to write the file to application server. So, I created logical file name and logical paths as specified in below link.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
That is created 'logical file path defination' in 'FILE' transaction. Used the physical path as - 'bw/FTPOUT/BPR/GM/<FILENAME>' as given in above link..
In logical file name I used the above logical file path.
When I run the open hub, I'm getting the ABAP dump "UNCAUGHT_EXCEPTION
CX_RSB_WRITE_ERROR
12/18/2008 09:00:40"
Can any one tell me how to write open hubs to application server?

Hi David,
Goto transaction code - FILE
1) Create a Logical File Path definition, enter the technical name and description by clicking new entries and save it.(z_ftp)
2) create a Logical file name definition using cross client,
enter the logical file name = z_ftp , name = ftp , physical file = ftp_test.txt,
dataformat = ASC, Appln area = BW and Logical path = z_ftp(created from step 1).
click SAVE button.
3) Assignment of physical paths to logical paths, choose your logical path here.
enter the syntax group = UNIX
Physical path = /bwftp/....
Save it .
In the openhub,
choose definition type = file
Check the applicaion sever.
servername = dev
type of file name = Logical file
Applin server file name = z_ftp
separator = |
Hope this helps and solve your problem.
Thanks
Sat

How to find a path in Application server?

Hi,
I have a reqirement that i need to download the original document which is attached in the DIR links for each line item in the PO.
Say for Eg. user is uploading the original document in CV03n.
Through program i have to download it and save it in local desktop.
But as per my concern when user uploads that document in CV03N, it should get updated in application server.
I wants to know how can i find that path through the document got updated in AL11.
Please let me know if you have any idea on this.
Also please let me know if my question is not clear.
Regards,
Prabu

Hi Prabu,
It depends on how DMS is implemented in your place.
If DMS is implemented along with CONTENT SERVER, then the actual document uploaded is stored in CONTENT SERVER and only a link is saved in SAP DB and whenever you refer to this link the image is being retrieved and displayed.
If you dont have content server then the uploaded documents are stored in your application server only. Generally the big companies which implement DMS do have a content server otherwise DB size will grow enormously in no time.
Once you check out the basics of ur requirement, then search through FM's available related to DMS.
Hope this answer helps.
Regards,
Lakshmi Narayana

How to find characterSet of Oracle Application Server

How can I find out the character set that was installed when Oracle Application Server was installed?

- Refer to the OAS Globalization Support Document.
Oracle® Application Server Globalization Support Guide
10g Release 2 (10.1.2)
B14004-02
- Read with care these sections:
6.1 Installing Oracle Application Server for Global Deployment
- Also note that
"The NLS_LANG parameter controls the locale of the runtime environment on which OPMN runs. It should correspond to the default locale of the middle-tier runtime environment, which is the default locale of the operating system. The same NLS_LANG parameter is inherited by the OPMN managed processes, such as Oracle HTTP Server and OC4J, unless it is explicitly specified with a different value in opmn.xml.
For Microsoft Windows platforms, the pre-configured NLS_LANG is automatically registered in the Win32 registry as the NLS_LANG registry key at \\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOMEn. The NLS_LANG value in this registry key controls the locale of the runtime environment on which OPMN and its managed processes run. "
- Also note that the NLS_LANG parameter values will have different requirements for a monolingual and multilingual application architectures.
- to find the character set of infrastructure db or metadata repository, you may use the db method to find the character set installed.
SELECT * FROM nls_database_parameters WHERE parameter = 'NLS_CHARACTERSET'
hope that helps!
AMN

Connection to Application Server

Hello,
I have developed servlets using JDeveloper (in Desktop). Using connection wizard, How can i create connection to Application server( In unix box).
Thanks & Regards,
Viswa

Here's a link that introduces the features that are unique to Business Components:
http://otn.oracle.com/products/jdev/htdocs/bc4j/bc4jsod.html

Can I find out how many clients are connected to a server process?

Hi, I am hoping I can find out how many clients are connected to a server process. This could be either a programmatic lookout number, a number in a log file etc.
By the way, does lookout have any application (not data) logs? I have noticed that occasionally lookout will crash and I cannot find any logs to determine why, what processes were running, who last accessed it etc.
Thanks

Hello,
There's currently no way to acquire this data. I think that'd be a great suggestion for the product. Please submit your feedback to our developers at the following link: http://digital.ni.com/applications/psc.nsf/default?OpenForm&temp1=&node=
Best regards,
Yusuf C
Application Engineer
National Instruments

How to find if a SAP Application uses Shared server process ??

Hi,
Please find the details below wrt to SAP application:
SAP Release : SAP ECC 6.0
Oracle database Version : 10.2.0.4.0
Can you please tell me how to find if my SAP application with oracle uses Shared server mode or Dedicated server mode for oracle database access??
regards,
Arul S

Hi Nick,
Thanks for your reply.
I am also pasting the output of "lsnrctl services"
LSNRCTL for HPUX: Version 10.2.0.4.0 - Production
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=R1Q.WORLD))
Services Summary...
Service "R1Q" has 1 instance(s).
Instance "R1Q", status UNKNOWN, has 2 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
      "DEDICATED" established:269921 refused:0
         LOCAL SERVER
The command completed successfully
This looks like dedicated connection with the Oracle database..
Can you please comment on this?
Regards,
Arul S

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

How to save CSV file in application server while making infospoke

How to save CSV file in application server to be used as destination while making infospoke.
Please give the steps.........

Hi
If you want to load your flatfile from Application server,then you need to trasfer your file from your desktop(Computer) to Application server by using FTP.
Try using ARCHIVFILE_CLIENT_TO_SERVER Function module.
You Just need to give thesource path and the target path
goto SE37 t-code , which is Function module screen, give the function name ARCHIVFILE_CLIENT_TO_SERVER, on click F8 Execute button.
for path variable give the file path where it resides like C:\users\xxx\desktop\test.csv
for target path give the directory path on Application server: /data/bi_data
remember the directory in Server starts with /.
U have to where to place the file.
Otherwise use 3rd party tools to connect to ur appl server like : Core FTP and Absolute FTP in google.
Otherwise...
Goto the T.code AL11. From there, you can find the directories available in the Application Server.
For example, if you wanna save the file in the directory "DIR_HOME", then you can find the path of the directories in the nearby column. With the help of this, you can specify the target path. Specify the target path with directory name followed by the filename with .CSV extension.
Hope this helps
regards
gaurav

How to download from spool to application server

Hi all,
   Can any one tell me how to download from spool to application server. Quick response would be appreciated.
thanks
mahesh

Hi Kilaru,
Please find the sample code for your req,t and let me know if you found any difficulty on the same.
<b>Just copy paste the code :</b>
This will Convert spool to PDF format and download.
data: w_ident     like tsp01-rqident,
      w_doctype   like tsp01-rqdoctype,
      w_bytecount type i.
data: itab_pdf    like tline occurs 0 with header line.
parameter spoolnum like tsp01-rqident obligatory.
selection-screen begin of block a2 with frame.
parameters: to_pc   radiobutton group a2 default 'X',
             pcfile like rlgrap-filename lower case,
             to_unix radiobutton group a2,
             unixfile(255) lower case.
selection-screen end of block a2.
at selection-screen on block a2.
if to_pc = 'X' and pcfile is initial.
    message e398(00) with 'Enter PC File Name.'.
elseif to_unix = 'X' and unixfile is initial.
    message e398(00) with 'Enter Unix File Name.'.
endif.
at selection-screen on spoolnum.
select single rqident rqdoctype
         into (w_ident, w_doctype)
         from tsp01
         where rqident = spoolnum.
if sy-subrc ne 0.
    message e398(00) with 'Spool' spoolnum 'not found'.
endif.
at selection-screen on value-request for pcfile.
call function 'WS_FILENAME_GET'
       exporting
            mask     = ',.,..'
       importing
            filename = pcfile
       exceptions
            others   = 1.
if sy-subrc <> 0.
    message id sy-msgid type 'I' number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
start-of-selection.
if w_doctype = 'LIST'.
    perform get_abap_spool_in_pdf.
elseif w_doctype = 'OTF'.
    perform get_otf_spool_in_pdf.
endif.
if to_pc = 'X'.
    perform write_pdf_spool_to_pc.
else.
    perform write_pdf_spool_to_unix.
endif.
message i398(00) with 'Completed OK'.
form get_abap_spool_in_pdf.
refresh itab_pdf.
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
       exporting
            src_spoolid              = w_ident
       importing
            pdf_bytecount            = w_bytecount
       tables
            pdf                      = itab_pdf
       exceptions
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            others                   = 12.
if sy-subrc ne 0.
message e398(00) with 'Cannot convert to PDF. Error =' sy-subrc.
endif.
endform.
*********************************************************form get_otf_spool_in_pdf.
refresh itab_pdf.
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
       exporting
            src_spoolid              = w_ident
       importing
            pdf_bytecount            = w_bytecount
       tables
            pdf                      = itab_pdf
       exceptions
            err_no_otf_spooljob      = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_dstdevice        = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            others                   = 12.
if sy-subrc <> 0.
message e398(00) with 'Cannot convert to PDF. Error =' sy-subrc.
endif.
endform.
*********************************************************form write_pdf_spool_to_unix.
open dataset unixfile for output in binary mode.
if sy-subrc ne 0 .
    message e398(00) with 'Cannot open unix file for output:' unixfile.
endif.
loop at itab_pdf.
    transfer itab_pdf to unixfile.
    if sy-subrc ne 0 .
      message e398(00) with 'Cannot write to unix file:' unixfile.
    endif.
endloop.
close dataset unixfile.
endform.
*********************************************************form write_pdf_spool_to_pc.
call function 'WS_DOWNLOAD'
       exporting
            bin_filesize            = w_bytecount
            filename                = pcfile
            filetype                = 'BIN'
       tables
            data_tab                = itab_pdf
       exceptions
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            others                  = 10.
if sy-subrc <> 0.
message e398(00) with 'Cannot download to PC. Error =' sy-subrc.
endif.
endform.
Hope this will help you.
Cheers
Sunny
Rewrd points, if found helpful

InfoSpoke fails with message "Could not open file on application server"

BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.

Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help.

How deploy 6i Forms Fmx trought Application Server 10g

Hello every one,
Situation :
In my company, we have a software developed by a team using Oracle Forms 6i, the application is connected te Oracle 9i Database and every thing works well.
Problem :
I was able to upgrade the database from 9i to 10g. But my question : is it possible to deploy all the Forms (fmx 6i version) on Application Server 10g. I want to use the 3-tiers architecture.
Take note that i have not the fmb source files. Just the FMX (about 40 files)
If yes, can you explain also how to proceed (tools to install on Application Server) and how to setup the connection between the 3 tiers throught a LOCAL NETWORK.
Regards
Kira

You will at least need to recompile all those *.fmb to *.fmx in the version of the App server you will be using.
We have a forms6 c/s application we are migrating to forms 11g and it almost that easy (except for changes in how you launch reports).
The application server is setup alot like the client/server side of forms is, it needs a tnsnames.ora that points to the database and it needs to know where you will be storing the forms and report. Looks for any *.fmx and that will be the default location.

How to zip the folder in application server?

how to zip the folder in application server?

You can use
open dataset with filter
link:[http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET_OS_ADDITION.htm#!ABAP_ADDITION_2@2@]

How to find out the web/app server used by OBIEE and OBIEE HomePath (Urgent

Hi All ,
I have two questions
1) I wanted to know the OBIEE home path if it is installed on the some other machine (Client's Machine).
I wanted to update the .css files present on the machine, but before updating the file i should know the home path, to reach the desired .css file and update accordingly. I dont know where they have installed OBIEE.By default OBIEE home is (c:\) but if the user has selected some other drive then, how we can find the OBIEE Home path?
I have the access to the machine.
2) The path of the CSS files depends on the web server used by OBIEE.
When IIS web server is used, the CSS files in OracleBI_HOME\web\app\res directory
when OC4J is used, the CSS files in OracleBI_HOME\oc4j_bi\j2ee\home\applications\analytics\analytics\res
so inorder to update i must know which server is being used.
Is there any way to find out which web application server is installed on the clients machine?
Thanks in advance.!!!!!

Please see responses to your first posting here: OBI EE Home Path

How to rename a file in Application server

Hi All,
Here I have a issue with the present file which is being generated in application server.
Before the completion of the file the EDI tool is extracting the file from the app server.So here I would like to generate the file with a temp name and then rename to the actual file name which EDI recognises and fetches.
Please correct me If I am wrong and let me know how to rename the file in application server.
Thanks,
Vijay N

you can try using unix command , if your application server is unix.
use move command
mv   <source> <target>
REPORT ZUNIX line-size 400
                no standard page heading.
data: unixcom like   rlgrap-filename.
unixcom = 'mv file1 file2'.
data: begin of tabl occurs 500,
        line(400),
      end of tabl.
data: lines type i.
start-of-selection.
refresh tabl.
call 'SYSTEM' id 'COMMAND' field unixcom
                id 'TAB'     field tabl[].
or else you can open dataset/ read the dataset and move it to another file and delete the old file.

How to find open connection in application server

Similar Messages

Maybe you are looking for