How to find out all the OKCODEs for a particular screen?

I am working on t-code CL20N and trying to record with t-code SHDB, in the second screen when I press enter it is coming out, but when I run CL20N without SHDB it is going through all the screens perfectly, SHDB is not working for CL20N.
Is there any other way to find out all the OKCODEs for a particular screen/s?

Hi,
First look for any push button or menu item which can take you to the second screen instead of hitting enter directly in tcode CL20N . If any such button exist in the TCode, u can use the same button in SHDB also for moving to the  second screen.
Thanks,
Rajinikanth G

Similar Messages

  • How to find out all the tables associated with particular T-code or Program

    Hi All,
    In 4.6B we have a transaction code SE49, where we can see all the tables associated with particular Transaction code or Program.
    But in ECC 5.0 or in ECC 6.0 this transaction code is not available.So is there any alternative where i can find out all the tables associated with particular T-code or Program.
    Thanks
    Shubham

    Hi,
    you are right, Transaction SE49 as well as SE48 do not exist anymore I'm afraid, they        
    are discontinued.                                                              
    You might try to create a transaction variant:                                        
    1) Start SE93 to create a transaction variant                                         
    2) Specify a name, eg. ZSE49, and choose the first option:                            
       "program and screen (dialog transaction)                                           
    3) Here specify SAPMSEUZ as program, and 200 as screen number                         
    4) Choose a suitable development class (package) if you want it to be                 
       transportable or Local (=$TMP) if non-transportable                                
    5) press Save                                                                         
    Same applies for SE48, same program but dynpro 100.                                   
    Sorry for not being able the reasons behind the decision to discontinue            
    these transactions. I suppose at least part of the functionality was               
    integrated in SE38.           
    Best regards
    Erika

  • How to find out all the text elements in the report using Java?

    How to trace the contents of an rpt file?
    I am able to open the rpt file in my report viewer but can not trace it using the JAVA code.
    Actually, I need to find out all the text elements of rpt (Report) file and replace them with the contents of resource bundle.
    My Java code to open a report is given below:
    import com.crystaldecisions.reports.sdk.ISubreportClientDocument;
    import com.crystaldecisions.reports.sdk.ParameterFieldController;
    import com.crystaldecisions.reports.sdk.ReportClientDocument;
    import com.crystaldecisions.sdk.occa.report.data.ConnectionInfo;
    import com.crystaldecisions.sdk.occa.report.data.ConnectionInfos;
    import com.crystaldecisions.sdk.occa.report.data.Fields;
    import com.crystaldecisions.sdk.occa.report.data.IConnectionInfo;
    import com.crystaldecisions.sdk.occa.report.data.ParameterField;
    import com.crystaldecisions.sdk.occa.report.data.ParameterFieldDiscreteValue;
    import com.crystaldecisions.sdk.occa.report.data.Values;
    import com.crystaldecisions.sdk.occa.report.lib.IStrings;
    import com.crystaldecisions.sdk.occa.report.lib.PropertyBag;
    import com.crystaldecisions.sdk.occa.report.lib.PropertyBagHelper;
    import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException;
    import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;
    public String viewRpt()
                   //1.) Setting Database Infos
                            IConnectionInfo iConnectionInfoObj=setDatabaseConnectionInfos();
                   //2.) Setting Report Path
                   String reportPath=u201DE:
    was60
    rptFilesLocation
    u201D;
                   reportPath=(reportPath!=null)?                                             reportPath:AppConstants.CONSTANTS.BLANK;
                   String reportName="report1.rpt";
                   String reportFullPath = reportPath +   rptName;
                 //3.) Setting Report Source
                             ReportClientDocument reportClientDoc = new ReportClientDocument();
                                              reportClientDoc.open(reportPath, 0);
                  IReportSource reportSource = reportClientDoc.getReportSource();
                  setReportSource(reportSource);
                  reportClientDoc.close();
              //4.) Setting the Fields Starts
              setFieldsCrystal(null);
              Fields fields = new Fields();
              ParameterField pfield1 = new ParameterField();
              Values vals1 = new Values();
              ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
              pfield1.setName("@parameter1");
              pfieldDV1.setValue(u201Cvalue1u201D);
              vals1.add(pfieldDV1);
              pfield1.setCurrentValues(vals1);
              fields.add(pfield1);
              pfield1 = new ParameterField();
              vals1 = new Values();
              pfieldDV1 = new ParameterFieldDiscreteValue();
              pfield1.setName("@parameter2");
              pfieldDV1.setValue(u201Cvalue2u201D);
              vals1.add(pfieldDV1);
              pfield1.setCurrentValues(vals1);
              fields.add(pfield1);
              setFieldsCrystal(fields);
              //Setting the Fields Ends
    The sample jsp code to view the report is as follows:
    <%@taglib uri="http://www.businessobjects.com/jsf/crystalreportsviewers"
         prefix="bocrv"%>
    <bocrv:reportPageViewer viewerName="CrystalViewer"
                                                 reportSource="#{CrystalReportBeanObject.reportSource}"
                                                 displayToolbarRefreshButton="false"
                                                 allowDatabaseLogonPrompting="false"
                                                 allowParameterPrompting="false"
                                                 databaseLogonInfos="#{CrystalReportBeanObject.connectionInfosCrystal}"
                                                 parameterFields="#{CrystalReportBeanObject.fieldsCrystal}"
                                                 displayGroupTree="false" displayToolbarLogo="false"
                                                 displayToolbarToggleTreeButton="false"
                                                 enablePageToGrow="false" height="540"
                                                 zoomPercentage="100" width="750"
                                                 allowDrillDown="false"
                                                 displayToolbarPrintButton="true"
                                                 printMode="PDF"
                                                 ></bocrv:reportPageViewer>
    Edited by: JayKumarSharma on Mar 23, 2011 12:42 PM

    This is how you retrieve all the text fields in the reort:
    ReportObjects reportObjects = (ITextObject) oReportClientDocument.getReportDefController().getReportObjectController().getReportObjectsByKind(ReportObjectKind.text);
    for(int i=0; i< reportObjects.size();i++)
    ITextObject textObject = (ITextObject)reportObjects.get(i);
    // use ReportObjectController to modify the text object.
    If you want to modify the contents of the text element, you can do it as follows:
    TextObject oTextObject = new TextObject();
    Paragraphs oParagraphs = new Paragraphs();
    Paragraph oParagraph = new Paragraph();
    ParagraphElements oParagraphElements = new ParagraphElements();
    ParagraphTextElement oParagraphTextElement = new ParagraphTextElement();
    oParagraphTextElement.setText("This is the new text field");
    oParagraphTextElement.setKind(ParagraphElementKind.text);
    oReportClientDocument.getReportDefController().getReportObjectController().modify(textObject, oTextObject);
    oReportClientDocument.save();

  • How to find out all the reports in production, ran how many times?

    Hi experts,
    I like to find out all the reports in production, ran how many time and by which user. Can I use st03n for this? if yes how and where to go?
    Thanks in advance.
    Sharat.

    Hi,
    You can use the statistics Cube 0BWTCT_C02. To get the Frequency of how many times a report has been executed, drill down the particular report by 0CALDAY and the frequency in 0FREQUENCY Keyfigure.
    Make sure the Cube is loaded,
    Thanks & Regards,
    Namrata

  • How to find out all the tables in a schema with a particular column

    Hi
    Is there a way to find out all the tables in schema1 that has col1 as one of the columns?

    select table_name from dba_tab_cols where owner='schema' and column_name='col1';

  • HT5625 I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    A wet phone is out of warranty. This is considered user damage. Even if you were able to get it to start now, the chances of it working for long are slim. I suggest going to Apple and see about an OOW replacement. One for the iPhone 4 is only $149USD and it would come with a short warranty. It is a refurbished device and you would not be worried about encountering additional problems.

  • Table Name or Function Module to find out all the Screens & Subscreens for

    Hello Experts,
          Table Name or Function Module to find out all the Screens & Subscreens for all T-Codes
    Helpful Answer will b rewarded
    Arif Shaik

    Hi Balaji,
       But TSTC only Gives the Program Name , T-Code and Screen but not all the Subscreen details
    Any other which U know

  • How can i find out all the different meanings of  User ID Paramtrs (USR05)?

    Dear Gurus
    How can i find out all the different meanings of  User ID Parameters (table USR05)?
    Thanks
    Nuno Natividade

    hi,
       the values are stored in the table tpara and they are used to put the landscape of the system,and to know the log of the system.
      FORM DETERMINE_LANDSCAPE .
        SELECT SINGLE * FROM USR05
                        WHERE BNAME = SY-UNAME
                            AND PARID = 'ZLANDSCAPE'.
        IF SY-SUBRC = 0.
          IF NOT USR05-PARVA IS INITIAL.
       REPLACE
          ELSE.
            PERFORM DETERMINE_FROM_CENTRAL_SYSTEM.
          ENDIF.
        ELSE.
          PERFORM DETERMINE_FROM_CENTRAL_SYSTEM.
        ENDIF.
      ENDFORM.                    " determine_landscape
      FORM DETERMINE_LOG_PARAMETER.
        SELECT SINGLE * FROM USR05 WHERE BNAME = SY-UNAME
                            AND PARID = 'ZLOG_USER'
                            AND PARVA = 'X'.
        IF SY-SUBRC = 0.
          WITH_LOG = 'X'.
        ENDIF.
    <REMOVED BY MODERATOR>
    venkat.
    Edited by: Alvaro Tejada Galindo on Mar 4, 2008 12:47 PM

  • Is there a way to find out all the apps that I've deleted on my iPhone? If so how?

    Is there a way to find out all the apps that I have deleted on my iPhone ? If so how?
    And all so if I have cleared my history on safari but not in the settings is there a way to retrieve the last sites visited? If so how?
    Thanks.

    What is iOS 5 ?
    http://support.apple.com/kb/dl1521
    And does my iPhone 4 as that?
    Settings>>General>>About>>Version
    (Used my iTouch as example)
    And if it deos how can I see the apps that I've deleted ?
    App Store>>Updates>>Purchased
    Scroll through the list of apps that your purchased, and if you remember the apps that you delete, the search will be a lot easier.
    If you don't have iOS 5, you can update your iPhone and since you have an iPhone 4, you can only go up to iOS 6.1.3
    iOS: How to update your iPhone, iPad, or iPod touch
    Hope all this helps.
    Message was edited by: keeferaf

  • How to find out last update date for business partner's marketing attribute

    How to find out last update date for business partner's marketing attribute??
    Im freshie for SAP Application and im assigned to find out last update date for marketing attribute changed
    which table is involved??
    Yours kindness will be appreciated
    thanks

    You can take a look at table AUSP as well as CRMD_AUSP_HIST.
    The "changed by" and "changed at" are logged on attribute level, not on attribute value level. When you change one specific value, the system does a "re-insert" of all existing values of this attribute.
    Take a look at the SAP notes 938426 and 966670  these may assit you in resolving the issue.
    Regards,
    William Laverde

  • How to find out Max threads count for Custom Work Manager??

    Hi All,
    How to find out Max threads count for Custom Work Manager??
    I have created 1 WM & targeted it to a cluster of 2 MS. Later I created Max thread Constraint = 300 & assigned that to my WM.
    I need to check how many threads maximum were created by my WM after lets say 1 completed day.
    The idea behind that is to understand if .. 300 is enough or need to increase the same way as we do it for JDBC datasource like.. Active connections Max count.. etc.
    Any Idea?
    regards,
    Tanmay

    Hi Ashish,
    Thanks for your response.
    The monitoring page that you are suggesting does not indicate the max thread count reached for a particular WM.
    For example, If I have Sample WM with 300 Max Thread Constraint, is there a way for me to check how many threads have been used out of 300??
    Any pointers in this regard are appreciated.
    Thanks,
    Tanmay

  • How to find out all users accessing a schema

    Hi,
    How can I find out all the users which has accessed a schema for the last 30 days? Auditing is not enabled in the database.
    DB:10.2.0.4
    OS:AIX

    user13364377 wrote:
    Thanks Antonio.
    Is it possible to find all the users which have access to the schema?Do you mean OS users access .. ?
    Because from v$session we can find users sessions information, if thats what you mean.

  • How to find out all user exits edited

    Hi All,
    Would you know how to find out all user exits have been ever edited?
    Can we find out those user exit by some tcode or table?
    Thank you very much
    Best Regards,
    Calvin
    Edited by: Sam Sum on Mar 2, 2009 5:09 AM

    Hi,
    Just try this in your system.
    Go to SE38 and give ZX* and press F4.
    Have a look at table MODATTR to find the active projects in your system.
    Regards
    Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM

  • How to find out about the SMTP Server

    Hi,
    I have been trying to configure groupware in the portal - in particular I want to enable the sending of emails through the portal. I already have a how-to-guide that that seems to explain the steps quite well. However, it mentions that I need to know the SMTP Server of the email. Can you tell me how to find out about the SMTP Server? Where do I need to look for the name of it?
    Thank you and regards,
    Katharina

    Hi Katharina,
    you need the SMTP server of your company. This means you can't look for it in the portal, but have to ask the responsible person in your company.
    Kind regards,
    dominik

  • How to find out whether the system user is a vendor or a purchaser

    Hi,
    I am working in SRM 5.0. I have a requirement that some fields of Bid invitation can be visible by purchaser but not to bidder.
    How to find out whether the system user (user id though which system logged in) is a vendor or a purchaser. Kindly help me to resolve this issue.
    Sushmita Singh

    check his role.
    is surrogate bidding available for that bidder.
    via surrogate bid , purchaser can submit bid on behalf of the bidder.
    masa is correct
    pposa_bbp - search via user . so he might be  a purchaser.
    maintain business partner -supply your bidder bp number -edit
    go to bidder data .Under bidder data you must flag "PERMIT PROXY BIDDING"
    regards
    Muthu
    br
    muthu

Maybe you are looking for