How to find out Enhancement details for Sales Order
Hello,
Follwing is the scenerio:
As soon as Third Party Sales Order created, Header Billing block gets triggered (from Sales Doc settings in VOV8).
In Sales Order there are 4 items of items:
1. Hardware Material (Price) with Item Category, say A
2. Hardware Material (Free-of-Charge) with item category, say B
3. Service Material (Price) with Item Category, say C
4. Service Material (Free-of-Charge) with item category, say D
Now there is another billing block, at item level, for Hardware Material (Price) - item cat. A, ONLY.
I checked item cat. in VOV7, and this block is not configured there.
Sales Order saved (with pop-up message - Maintain Serial No. for Material, but as it's third party Order, stock is not in Inventory, so no Serial number at this point of time). PR triggered upon saving the Order. from PR, PO gets generated,and then MIRO.
Now, as vendor Invoice received with Stock details (Manufacturer's Serial No.), we go to VA02 and maintain Serial No. (Extra --> Serial No.) for all 4 types of material (Pls note that Billing block is for Hardware Price Material, but we need to maintain Serial No. for all 4 types of material) and save order.
As soon as, serial no. maintained, item level billing block gets removed for Hardware (price) material, automatically.
I need to understand how this functionality has been achieved?
More precisely how and where i can see the technical details, like What program is being developed, which user-exit is being used etc...
Thanks.
Hi Sumitra,
Since the system exit handler has to call your BADI go to SE24 and display
CL_EXITHANDLER
Chose method get_instance and set a break point.
And, then press F8, so it will show all the Badi's.
Regard's,
Shivesh Ranjan.
Similar Messages
-
How to find out the Tcodes for the exits
Hi All,
how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
Customer Exits: EXIT_RFEBBU10_001
EXIT_RFEKA400_001
EXIT_RFFOEXIT_100
User-Exits: USEREXIT_DELETE_DOCUMENT
USEREXIT_FIELD_MODIFICATION
USEREXIT_MOVE_FIELD_TO_VBAK
USEREXIT_PRICING_PREPARE_TKOMP
BADI: CUSTOMER_ADD_DATA_CS
HISTORICAL_VALUES
MD_ADD_ELEMENTS
MD_CHANGE_MRP_DATA
MD_PIR_FLEX_CONS
MD_PLDORD_POST
ME_REQ_POSTED
NOTIF_EVENT_SAVE
Can anyone help on this <urgency factor removed>.
Regards
Ksihore
Edited by: Suhas Saha on Feb 20, 2012 12:58 PMi have just started reading about all these-user exits ,customer exits etc.
i have read somewhere that:call to customer exits are triggered by function modules exits.
the structure of function modules are like this:
EXIT_RFEBBU10_001
MEANS
Keyword EXIT followed by program name fllowed by three digits.
and the call is like this:
call customer function 0001.
From above we can conclude that this customer exit must be used in program RFEBBU10.
GOTO SE38 andenter prog name RFEBBU10.check for above function module.
for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
using Where used lists.
please Tell me if i m wrong! -
How to find out the description for the given field?
Hi All,
How to find out the description for the given field?
I mean ETTYP Desription is VTEXT. This we can find in TVEPT Table. So, How canwe find this?
Thanks in Advance
Sri...Hi Avi,
If i want to disply the fields like AUART and 'Description of AUART',
Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
my question is if i have given T184-AUART and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
Thanks in Advance
Sri... -
URGENT: How to find out the Tables for Routines in BW.
Hi BW Gurus,
How to find out the Tables for Routines in BW.
I have this routine id <b>45XFAEI7LKIFIRDUKQG127YWW</b> and it is in inactive state and i want to activate it.
thanks in advance,
points will be rewarded.
Regards,
Maruthi.Hi Maruthi,
Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
Cheers,
Praveen. -
How to find out the link for the tables for sub contract PO
Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK. -
How to find out responsibility attached for particular user through query
hi
How to find out responsibility attached for particular user through query
Regards
9841672839Hi,
Following sql will help you find the responsibilities associated with the users in oracle applications.
SELECT frt.RESPONSIBILITY_NAME, furg.end_date
FROM
fnd_user_resp_groups furg,
FND_RESPONSIBILITY fr,
fnd_responsibility_tl frt,
fnd_user fu
WHERE fu.user_name = ‘&&username’
AND fu.user_id = furg.user_id
AND furg.responsibility_id = fr.RESPONSIBILITY_ID
AND frt.responsibility_id = fr.RESPONSIBILITY_ID
ORDER BY 1
Cheers... -
How to find out the script for the table using SQL
Hi,
Could any one tell me that how to find out the script for the table using SQL.
Thanks,
kamalKamal,
You can find the SQL query in Advanced tab of Answers
Thanks,
Balaa... -
How to find the standard Idoc for Transfer Order (LT03)
hi
How to find the standard Idoc for Transfer Order (LT03)
How to create the Idoc on LT03
plz help me out
Thank u
RamSomeone is using FM: L_IDOC_INPUT_WMTORD, message type WMTORD and basic type WMTOID01 in doing this when trying to send an Idoc to an external system when a transfer order for a delivery note is created (LT03). Is it OK
Please reward points -
How to create a daily report for sales order
hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji -
How to mark up the price for sales order entry?
Hi Gurus,
How to Mark up the price for sales order entry?
Example: Item Price: $10, Adding 20% Margin
Selliing price of the item is $12
we are giving many typs discounts like festival Discount, customerwise, Order value wise etc..
After giving above discounts, if discount falls below $10 system should not allow to book the order, Trigger should go to respective person or sales person saying that item price falling below cost, system should not allow to book the sales order.
How to configure this scenarios in Order management Module, appreciate your inputs, advise.
Regards
AKThanks for your response,
can you please guide me step to achieve this requirement.
Regards
AK -
How to find out the infoProvider for a given dimension table?
Experts:
In RSA1, I want to find out the infoProvider for a given dimension table.
But I am not sure how to display the tables linked to a given infoProvider.
Could you provide a way to display all tables linked to a given infoProvider?
Thanks a lot!See, The dimension table starts with Dcubename1 and incremental Dcubename2 .... so on
Ex.ZSD_C01 is your cube name
Dim tables starts for this is /BIC/DZSD_C011 /BIC/DZSD_C012 ...
Goto - LISTSCHEMA - derive cube name from given dim table and enter cube name - execute - will show you all the tables -
How to find out a lot for a specific stock posting?
Dear Friends
In our system every day 3 times rej posting ( and ok qnty posting) is done and 3 lots are supposed to be cleared for 3 consecutive shifts A, B, C. Now I found on 2.9.2009, 4 rej postings are done in mb51, (The unmatched rej qntity is X) rej storage.But I found only three lots are cleared from qa32.
I found that none of these 3 lots have rej qnty/ok qnty as X
So there must be a fourth lot that was cleared on 2nd sep but created on some other date. Can u tell me how to find out this lot?
Can I find out inspection lot no from material doment created due to stock posting in mb51?
In qa32 we can find production order number, but can i find order confirmation number from qa32?
Thanks
ChandraHi Chandra
It is very muxh possible to view the Inspection lot from the Material document if know either through MB51 or MIGO
Enter material document number>at the bottom there is QTy tab>Here you will find "Status Gr Doc" Inspection lot.
Also
Just check the Material document's mvt type for Qty X it may not be 321.......Revert back
This document may be generated due to additional mvt done in US screen.
Regards
Sujiy -
How to find out data source for a datawindow?
I have a datawindow and I want to identify it's datasource.
I open this datawindow in pb. then in design menu, Data Source is disabled. It means not direct sql
Then I go to Column Specific(small window), and right click on any space, in the popup menu, there is no 'Stored Procedure...'. It means not procedure.
(see screeshot attached)
then how to find out the data source for this datawindow?Hi Kent;
1) I would use the RHMB on the DWO in the System Tree and select the "Edit Source" option.
2) In the DWO source, locate the "TABLE ( ...." line
3) If the next major line starts with "DATA(...." then this is an external DWO.
4) If the next major line starts with "Retrieve(...." then this is a normal DWO (SQL or SP based).
5) If the next major line starts with "webservice=(WSDL...." then this is a Web Service based DWO.
Note: if your DWO has no #3, 4 or 5, then its external.
HTH
Regards ... Chris -
How to find out Query Statistics for the initial selections
Hi,
Is there a way to find out the statistics for the initial query execution(without any navigations)
/SantoshHi,
For knowing the statistics of the Query (Responce performence). U can find out with T-Code RSDDSTAT. The base rule is U have to execute the Query atleast once. If you the aggrigates are there at DATA TARGET level u can get a details view with TCode RSDDV.
Best Regards -
How to find out the URL for OAM at a new site
Hi
if you turn up at a new site, and you only have the oracle / applmgr account password
to a linux server, how would you go about finding out the URL for OAM ?
Many thanksOAM URL is:
http://hostname.domain:port/servlets/weboam/oam/oamLogin
Maybe you are looking for
-
Error while releasing billing documents to accounting
i am facing the following problem while releasing billing documents to accounting i.e, taxcode in procedure TAXD is invalid... pls solve it...
-
External DVD drive not working
Need some help with this one: My sister-in-law has an iMac G4 1.25Ghz 17" LCD USB 2.0 with 10.4.11. The internal DVD-ROM CD-RW died awhile back so she purchased a Sony external DVD-ROM CD-RW USB 2.0 to take its place. Everything was working fine. Rec
-
I have migrated my accounts from my old G5 to new Mac Pro and they all work just fine. However when I try to create a new user account for my youngest daughter whilst everything appears to be fine on creation when i try to switch between my admin aco
-
I have noticed a bug in the address lookup in iCal, it never seems to find the same addresses as it does in the native maps app which renders this function useless. I was wondering if anyone else has found this issue or a fix. When iCal is searching
-
[svn:fx-4.x] 15006: Menu check icon mirroring bug fix
Revision: 15006 Revision: 15006 Author: [email protected] Date: 2010-03-24 16:38:11 -0700 (Wed, 24 Mar 2010) Log Message: Menu check icon mirroring bug fix http://bugs.adobe.com/jira/browse/SDK-25976 - Un-mirror the check icon when layoutDirect