How to find out exchange active sync server address

Hi, I have just had exchange set up at work, I cannot get it working on the iPhone, the guy who set it up doesnt know what it may be. I have tried all sorts of things like the static ip address and domain name but just cant seem to get it working.
Any suggestions?
Thank you

Hi, its Exchange 2003 SP2, OWA was working up till some updates where done on the server last week, now after you enter the user name and password I get a error HTTP/1.1 503 Service Unavailable, the guy who installed the server has been rolling back the updates to try and get it working but still hasnt been able to. Its problem after problem ATM, I cant VPN in either, the installer can from his place though.

Similar Messages

  • How to find out an active LDAP Server?

    How to find all other active LDAP servers when one fails?

    Hi, its Exchange 2003 SP2, OWA was working up till some updates where done on the server last week, now after you enter the user name and password I get a error HTTP/1.1 503 Service Unavailable, the guy who installed the server has been rolling back the updates to try and get it working but still hasnt been able to. Its problem after problem ATM, I cant VPN in either, the installer can from his place though.

  • How to find out about the SMTP Server

    Hi,
    I have been trying to configure groupware in the portal - in particular I want to enable the sending of emails through the portal. I already have a how-to-guide that that seems to explain the steps quite well. However, it mentions that I need to know the SMTP Server of the email. Can you tell me how to find out about the SMTP Server? Where do I need to look for the name of it?
    Thank you and regards,
    Katharina

    Hi Katharina,
    you need the SMTP server of your company. This means you can't look for it in the portal, but have to ask the responsible person in your company.
    Kind regards,
    dominik

  • How to find out all active instances in a syste

    How to find out all active instances in a system

    Go to your basis team and ask them, as far as i know there is no other way then suggested in the other answer, but that is not a complete picture, And that is as designed, why should one want to be able to find out, the basis consultant will tell you!

  • How to find out the active associations and clear inactive associations?

    Hi guys,
    I can find out the associates on IOS AP using the command "show dot11 associations client". The output includes all associations even though the clients have left for a long while.
    1.How to find out the active associations?
    2.How to clear the inactive associations?
    3.What is the by default timeout for the inactive associations?
    Thanks,
    yytellmey

    Hi Huang,
    try this:
    Show the associated clients:
    sh dot11 associations all-client
    Deauthenticate client
    clear dot11 client
    Activity Timeout
    show dot11 activity-timeout
    per standard 60 secs.
    Best regards,
    Frank

  • How to find out the web/app server used by OBIEE and OBIEE HomePath (Urgent

    Hi All ,
    I have two questions
    1) I wanted to know the OBIEE home path if it is installed on the some other machine (Client's Machine).
    I wanted to update the .css files present on the machine, but before updating the file i should know the home path, to reach the desired .css file and update accordingly. I dont know where they have installed OBIEE.By default OBIEE home is (c:\) but if the user has selected some other drive then, how we can find the OBIEE Home path?
    I have the access to the machine.
    2) The path of the CSS files depends on the web server used by OBIEE.
    When IIS web server is used, the CSS files in OracleBI_HOME\web\app\res directory
    when OC4J is used, the CSS files in OracleBI_HOME\oc4j_bi\j2ee\home\applications\analytics\analytics\res
    so inorder to update i must know which server is being used.
    Is there any way to find out which web application server is installed on the clients machine?
    Thanks in advance.!!!!!

    Please see responses to your first posting here: OBI EE Home Path

  • How to find out who installed SQL Server in Big orgnization?

    Hi all,,,
    I want to find out who installed SQL server in their computers/servers. The internet is open and it's easy to install SQL server EXPRESS. Iam not looking for the command which will results computers in my vlan only. Iam looking for a query to result out
    all SQL installed with different Vlan within the organization.
    Anyway to find them out?!  Thanks.

    No need to know WHO install it but is it possible to know the Host name that SQL installed in?!
    You asked for "who", not for "where".
    You can use MS MAP =
    Microsoft Assessment and Planning Toolkit : "Software Usage Tracker Feature Overview ....
    SQL Server" to get reports, which software is running on which machine.
    Or you can use this PowerShell Script
    Create Inventory of SQL Server in Network as Html
    For both you need permissions to fetch the required information from all machines, of course.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How to find out Sessions in weblogic server

    Hi all,
    i am new to weblogic and i am struck at these two questions while creating managed servers. Many people questioned me regarding this. Can you all please help me out.
    1)Before adding a MS , how can we figure out the current load and what would be the impact/benefit be if we add a MS.
    2)How many sessions can be handled by the unix Weblogic server?

    HI,
    The answer of These kind of questions can be found only after the Load Test on the WLS. Because there is no formula to calculate these things. Because these things totally depends on various different things....Like Operating System, It's RAM, CPUs, JDKs, Application type(EJB, WebServices, Portal, Simple WebApp), Number of Users, The Physical Distance of ManagedServers and DataBases....Network Conjunction...etc
    So no one can tell here the exact value. But for performance diagnostics you can refer to *"René van Wijk"* best article to find out these things using small tests as described in the following Link:
    Topic: Performing Diagnostics in a WebLogic environment
    http://middlewaremagic.com/weblogic/?p=6016

  • How to find out total active employess/users in PeopleSoft system.

    Hi,
    We need to find out how many terminated employees and how many active employees we have in our Peoplesoft system.
    Thanks.

    Hi rajesh,
    You can use SU10, then click on "Authorization data" -> put * on user -> execute.. you should get a list of all users in the client with details included...
    Also you can list them using USMM and check all licensed users....
    Also SUIM -> users by complex selection criteria -> By user id -> put * on user -> execute.
    Regards
    Juan

  • How to find out the activation log for a info* from Business content

    Hi,
      I work in a BW 3.5 environment where a lot of projects are being done simultaneously and a lot of Business content are getting activated. BW often activates a lot of other objects when a certain section of seemingly unrelated Business contents are activated without much caution.
      When I look into some of the objects related to my area of the Business content, I find them already activated.
      How do I find the activation( who, what time etc ) log history of certain objects like info objects, cubes, ODS, Infosource etc..
      This will help me immensely to communicate with various people( who inadvertently activeted them)  and find issues quickly.
       Thanks
    Arun

    Hi,
    The tables in which application logs are stored are:
    BAL_AMODAL                     Application Log: INDX table for amodal com
    BAL_INDX                       Application Log: INDX tables             
    BALC                           Application Log: Log or message context  
    BALDAT                         Application Log: Log data                
    BALHANDLE                      Application Log: Lock
    object dummy table 
    BALHDR                         Application log: log header              
    BALHDRP                        Application log: log parameter           
    BALM                           Application log: log message             
    BALMP                          Application log: message parameter       
    BALOBJ                         Application log: objects                 
    BALOBJT                        Application log: object texts            
    BALSUB                         Application log: sub-objects             
    BALSUBT                        Application log: Sub-object texts
    Within Tcode SLG1 you can query systemwide object activation on various selection criteria.
    Ofcourse furthermore for objects already once transported to PRD you can search transport requests or object lists via Tcode SE01.
    Kind regards Patrick Rieken

  • How to find out the active status of catalog area..

    Hi Team,
    In COMM_PCAT_ADM, we can find out the catalog view > catalog areas and product and their status.
    I am working on a requirement where i need to create a report program which will fetch the catalog id, catalog view, catalo area, catalog area status, product id and status.  Input is the catalog id and View ids (can give a range of views).
    Using tables comv_pcat_itm_a, comv_pcat_itm and comm_pcat_view i was able to retrieve the details except the catalog area status.
    Can anyone help me on this..

    Hi,
    Use Tcode st05 for search required table.
    Denis.

  • How to Create a Microsoft Exchange Active Sync Account

    Okay people:  This is what I was given, "How toCreate a Microsoft Exchange Active Sync Account"  in a recent post in regarding to eliminate the "Invalid Email Account" notice box which appears every other day, after I deleted and added the email account.   
    I still have one email account functioning which is fine, but still, I'd like to have both of my accounts working.  Anyhow, I found the webpage for this creating a Microsoft Exchange Active Sync Account. Setting up an Exchange email account on BlackBerry PlayBook OS 2.0 | BrightPoint GB Blog 
    I need help here.  I have no idea what "Domain Field" indicates, and what is the IT Department?  Would that be my server for my private WiFi connection?   I need a more specific instructions.  Plus the Server Address, what would that be?   
    Signed:  Confused and Bewildered. 
    Solved!
    Go to Solution.

    in options goto accounts
    choose acount type  Email, Calendar, contacts
    tap on advanced on bottom
    choose Email, Calendar, contacts
    Set the Incoming Mail Server to m.gmail.com
    Leave Domain blank
    Set your username to your full email address
    set password and continue
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

    How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

    Hi Dave,
    You need to type the server name that was assigned by your mail administrator for the server running Exchange. So please ask your administrator for the Server name. Thanks for your understanding.
    For more information, here is an article for your reference.
    Add or remove an e-mail account
    https://support.office.com/en-ca/article/Add-or-remove-an-e-mail-account-ff7c7735-6117-4b0d-aef6-8aa8a072f60f
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • How to find out ASE backup server?

    As backup server is a separate service. how to find out if ASE engine has backup server or not?
    Or how to get into backup server and find out what ASE this backup server is working for?

    Just to add a little to Gek's reply, addressing your second question:
    Or how to get into backup server and find out what ASE this backup server is working for?
    That you can't really do.  A backupserver can be used by multiple ASE servers and doesn't maintain any permanent registry of servers it is used by.  From a connection to ASE, you can do a SYB_BACKUP....sp_who remote procedure call to get some information on current activity on the backupserver, but the information is pretty limited.
    1> SYB_BACKUP...sp_who
    2> go
    spid        status     loginame                       hostname     blk cmd
               1 sleeping   NULL                           NULL         0   CONNECT HANDLER
               2 sleeping   NULL                           NULL         0   DEFERRED HANDLER
               3 runnable   NULL                           NULL         0   SCHEDULER
               4 runnable   NULL                           REL157SP1xx* 0   SITE HANDLER
               6 running    sa                             bret-sun2    0   NULL
    (5 rows affected)
    My ASE's name is REL157SP1xx_bret_sun2, so you aren't even getting the full name of the ASE backupserver is currently working with.  I had just booted the backupserver, so the Site Handler was started to handle the RPC call, it doesn't even mean that server had ever dumped a database.
    While you can connect to the backpserver directly with a client, the backupserver does not have a command language processor, so any commands you send directly to backupserver (as opposed to rpc calls) will only get the response "no language handler installed", like this:
    bret-sun2% isql -Usa -P -Srel1572nb_bret_sun2_back
    1> select @@version
    2> go
    No language handler installed.
    That is why the (polite) way of shutting down a backupserver is to issue
    "shutdown SYB_BACKUP" from a client logged into an ASE.  (the impolite
    way is to use an OS kill command against the backpserver process).
    -bret

  • Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

    Hello, everyone, my name is rafl
    I have a problem with exchange 2013 active sync.
    I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
    but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
    (legacy.domain.com)
    the process of moving mailboxes successfully without error.
    Access OWA for exchange 2007 and exchange 2013 is running normally
    access mail from Outlook running normally
    Certificate request has been installed and has no problem with it
    The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
    The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
    ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
    user mailboxes are still on exchange 2007 is not problematic.
    only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
    but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
    only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
    any ideas for this problem, and what should I check on the exchange server ..?

    i have run the activesync test connectivity and get some error :
    Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 3091 ms.
    Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21072 ms.
    Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21049 ms.
    I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
    for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

Maybe you are looking for