How to find out existing Reports and sap scripts and smartforms ?

Dear Friends ,
How to find out existing Reports and sap scripts and smartforms ?
( e.g: how many existing reports and SAP scripts are available in MM or SD module , What is the procedure to find out ? )
Thanking you.
Regards,
Subash.

scripts r stored in TNAPR TABLES

Similar Messages

How to find out BW reports

Moderator nessage - welcome to SCN
But before posting, please take the time to read the rules of engagement - please do not ask vague, basic questions. And please make sure that you post to the correct forum.
Hello All,
Pleas any body can help me how to find out BW reports & what are the steps ?
Thanks & Regards
Tejaswi Gupta
Edited by: Rob Burbank on Apr 6, 2009 5:16 PM

hi,
goto SE81 and click on the corresponding application like fi
You will get the standard packages for FI with the programs available
Please check out this link
http://www.sap-img.com/financial/useful-reports-tcode-in-sap-financial-accounting.htm
or
Check this Transaction: SAP1
U will have reports based on the area.
or
Look at the table TADIR --> see only the programs, even you can look at based on the Development class wise
If you find it useful mark the points
Regards,
GNK

How to find out relevant Infosources and Infocubes for Datasources (LO)

Hi Gems,
I am new to BW.
How to find out relevant Infosources and Infocubes for Datasources for LO Cockpit
any help site pls.
Thanks in advance

1. make sure that your datasources have activated (trans RSA5 in SAP Source System) from the SAP Source system (Ex: R/3 or SCM System)
2. after that you have to run trans RSA9 in SAP Source System to transfer new datasource in to BI System.
3. log-on into BI System, run trans RSA1, choose SourceSystem Tab in the left panel. Right click on to your SAP Source System then choose Replicate.
4. in the left panel choose BI Content tab, select infoObjects by infoArea.
5. then Click on Grouping, select in Dataflow Before and afterward. Click Collection Mode, select Collect Automatically.
6.in the middle panel, expand "Supply Chain Management" infoArea, select both Characteristics: Logistics General and Key Figures: Logistics General. Right click on it and select Insert Objects for Collections.
7. After the objects have been inserted into Collected Objects then choose install with option Install in Background.
8. Wait for the result.
Pls give point if you see its helpful.
Regards,
Chuong Hoang

How to find out peak workload and peak workload hours ?

We have recieved a query from client.
they want us to tell them peak work load (volume of data database manage at peak work load hours).
now the question is how to find out peak workload and peak workload hour in live prod database?
i do not think AWR report will give any clue on this even if when extract it for the hours when my database is into some daily planned activity with lots of transactions.
share your findings? thanks

The OEM portal allows you to view performance data in a chart over time, based on data in the AWR tables. If you don't have OEM configured, then you can select directly from the tables and sum by snap. Or if you are collecting data at OS level, (SAR etc) then use that.
If they are just interested in data changes, then you could just select FIRST_TIME, blocks *block_size from v$archived_log and break it down by hour etc.

How to find out the cost of SAP user for a particular user id

Dear All,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
Raghu

Hello Raghu,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
I think you need to reach out to BASIS consultant to check out the Cost involved for User ID for the SAP application.
Regards,
Sarthak

Urgentpls : How to find the Oracle reports and forms version in Unix prompt

Hi,
How to find the Oracle reports and forms version in Unix prompt.
Please give the steps
Thanks

I need to check the version of Oracle forms and reportsExample :$ frmcmp.sh -h | head -1
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
$ rwrun.sh 2>/dev/null | head -2 | tail -1
Report Builder: Release 10.1.2.0.2 - Production on Wed Mar 10 11:17:55 2010
$

How to find out the plants and storage location for a given company code

hi
How to find out the plants and storage location for a given company code

Hi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore

Out Put type for sap script or smartforms

hi,
Actually, i want out put type, application, SAP Script or Smartform name and program name of transaction code ( F.64 ). i.e. correspondance Maintain request.
Thank You...

Manoj,
In SPRO follow this path.
Form 16A
Financial Accounting
Global settings
withholding tax
Extended Witholdong tax
POstings
India
Withholding tax certificates for vendors
maintain no.groups and script forms.
For cheques and Payment Advisory.
Go to FBZP
click on printmethods in company code
click on position
give Company code and payment method
then in the next screen double click on the payment method
This way you will get to see the forms assigned to it.
For Forms for Correspondence.
Financial Accounting
---Global settings
correspondence
define form names for correspondence print.
K.Kiran.

How to find out open PO in SAP?

Hi,
I have a simple question? How to find out if the PO is open?
Is there any field in any table in SAP which indicates this?
Is there any report in SAP which gives list of all open PO in the system?
Thanks,
Pratik

Hi
There is no way you can find out that wheather the particualr PO is open or not and there is no such table indicating that the particular purchase order is open.
Yes if a purchase order is already open in one system and you want to open that in your system in change mode than you can use the Tcode sm01 where you can know that which form is opened and you can unlock that particular form and can use that in change mode.
I hope this will help you to solve your problem
Thanks
Mrutyunjaya Tripathy

How to find out SR level in SAP system

Hi Guys,
How to find out the SR level of our system in Windows. And can any one tell me, what are the necessary CD's required for ECC 6.0 installation. I can found all the informations but I can't found for specific installation on windows -- mssql .
Thanks
Regards,
Ral

An SR (Service Release) is simply a base release + a certain amount of SPs(Support Packs).
So, the question you really want is what SP level is the system at. If it's an ABAP system, you can find that in the SYSTEM menu-->STATUS. Then click the magnifying glass under the "system data" section to see the individual SPs for the various components.
If it's a Java system, you need to log into the URL for the system information screen. That is:
http://<host>:5xx00
(where xx is the system number)
click "system information" and login with an administrative user. The component listing on that screen will tell you what level your java components are on.
You can download all needed software from
http://service.sap.com/swdc
You will need an OSS account, and proper authorizations given to you by an admin by the customer. Further, you will need your downlaods to be approved via the SolMan Maintenance Optimizer by an admin at the customer.

HOw to find out a report name when you know only the name of background job

Hi experts ,
my question is i need to find out teh report name for which i knew only the background job name of the report .
thanx
Venky.

Go to tcode SM37->Give job name and execute->choose tool bar button STEPS (Disply Steps list) ->Then you will get program or command

How to find out the tablename and column name

Hi,
I have inserted a value (say 'I am here') in a table. but i don't know which is getting inserted this value.
Now i want to know which table and colums has this value (I am here). How to find out as without knowing the table name.
Is there any option to get the tablename and colum??.
Please help me.
thanks.

Does nobody document their code anymore?
See my response Re: How to find out a tablename for one possible solution.
HTH
John

How to find out the primary and failover DNS name

Hi;
This sounds very stupid, but could some one please tell me how to find out the name/dns name of the primary and failover server without using the CDS console.
any help is appreciated

Is this what you want?
$ /usr/lib/ldap/ldap_cachemgr -g
cachemgr configuration:
server debug level 0
server log file "/var/ldap/cachemgr.log"
number of calls to ldapcachemgr 12729
cachemgr cache data statistics:
Configuration refresh information:
Previous refresh time: 2005/08/07 23:54:59
Next refresh time: 2005/08/08 00:55:00
Server information:
Previous refresh time: 2005/08/14 15:15:00
Next refresh time: 2005/08/15 03:15:00
server: ldap1.example.com, status: UP
server: ldap2.example.com, status: UP
server: ldap3.example.com, status: UP
Cache data information:
Maximum cache entries: 256
Number of cache entries: 0
Gary

How to find out relevant Infosources and Infocubes for Datasources

Hi All,
I am BIW beginner, have system installed BW 3.0B, I want to use r/3 Datasources and find out relevant Infosources and Infocubes, can any one help on this issue.
Thanks in Advance.

hi,
before going to install the infocube, infosource use follwing link to find the respective infosource belong to which infocube and chara, keyfigures.
then do the in stallion in bi content
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
regards
harikrishna N

UITableView section header: How to find out font size and background color

Hi, does anyone know how to find out the default font and default background color(or image?) used in the section header of a tableView
I'd like to create a view with the same background color/image and use the same font (with different color) used by the section header

I don't think there are any getter methods for a section header. But I wouldn't be surprised if the header was an object. You might try setting some header text to a key string and searching recursively through all the subviews for objects that respond to a text message. It might help to also print the description of objects that don't respond to text. I haven't tried this yet, but will let you know if I get any useful results.
I guess another approach would be to use viewForHeaderInSection to set the font and color to whatever you wanted. Then you wouldn't have any problem matching it.

How to find out existing Reports and sap scripts and smartforms ?

Similar Messages

Maybe you are looking for