How to find out if multiple apple ID's are attached to one icloud?

Hi - I recently bought an iPhone 5c, and when restoring the new phone from my last icloud back up I was prompted to enter the password's for 3 different apple ID's. One was my friend's apple ID, the other two were connected to really old email addresses that haven't been used in ages. How do I find out if these are somehow attached to my icloud? Also I keep getting a message that icloud can't be backed up because there isn't enough storage; I have deleted all of the data for all of my apps, including the camera roll, and it still says it's too full. Is it possible that my friend (the one whose apple ID popped up when I was restoring from a back up) are on the same icloud? Help!

Each iCloud account only has a single ID.  It isn't possible to have more than one ID for an iCloud account.  The reason you were asked to enter the password for those IDs when you restored the backup is that there was purchased media (apps, music, etc.) on the device that was backed up that was purchased with these IDs.  During the restore process, before the backup will restore this media to your device, you have to provide the correct passwords before they will be redownloaded from the iTuens & App store to your device.
The only way your friend could be backing up to your account would be if you were both sharing the account, using the same ID.
If you're out of space, go to Settings>iCloud>Storage & Backup>Manage Storage to get an idea what is using your storage.  You may have backups of old devices listed that you no longer need that are using your space.  You also might have lots of email using it.  Another space hog is your text messages.  If you have lots of photos and videos in your text messages, these are included in the backup and can use quite a bit of space.  If so, go through your text conversations and delete these attachments.
This article provides suggestions for reducing your iCloud storage: http://support.apple.com/kb/ht4847.

Similar Messages

  • How to find out where R/3 report data are stored

    Hy,
    I am new in BW.
    I have SAP R/3 report, I need to transfer that report data (all table data) to BW.
    Could You explain me step by step how i can do it?
    How to find out where data are stored?
    Thank you very much!
    Regards,
    Arunas

    Hi Arunas,
    This topic has been discusssed here earlier. Check these links:
    BW solution for ABAP Reports
    BW reports
    Bye
    Dinesh

  • How to find out the active status of catalog area..

    Hi Team,
    In COMM_PCAT_ADM, we can find out the catalog view > catalog areas and product and their status.
    I am working on a requirement where i need to create a report program which will fetch the catalog id, catalog view, catalo area, catalog area status, product id and status.  Input is the catalog id and View ids (can give a range of views).
    Using tables comv_pcat_itm_a, comv_pcat_itm and comm_pcat_view i was able to retrieve the details except the catalog area status.
    Can anyone help me on this..

    Hi,
    Use Tcode st05 for search required table.
    Denis.

  • How to find out size of Apple TV hard drive?

    A friend of mine recently gave me an old 1st generation Apple TV to sell on eBay. He doesn't remember which size hard drive it has (40GB or 160GB), and I'm having difficulty finding it. Does anyone know where to find that info? Thanks.

    The folllowing instructions assume that your Apple TV is up and running, and is regustered with iTunes.  If this is not te case, you'll have to resort to finding and matching model numbers as other posters have inicated.  It also applies only to the 1st Generation Apple TV (the silver one).
    In iTunes 9 or higher, select the Apple TV that appears in the devices list.  There is a capacity bar that shows you what space is used for what media type, but it also indicates the space remaining on the drive.  From that, you can deduce the size of the Apple TV's internal hard disk.
    --tonza

  • How to find out software from apple store

    Dear sir
    i don't have open a apple store so how can i download other app.

    What do mean by 'don't have open a apple store' ? What problem are you having ? As you've posted on here then you have an account.
    If you want to create another one then there are instructions on this page for doing so : http://support.apple.com/kb/HT2731
    Or if you don't want to give credit card details then follow the instructions on this page when creating it : http://support.apple.com/kb/HT2534

  • How to find out when mutiple non UI threads are dead.

    Hi all,
    (fresher to it)
    I am stuck with a problem since a few days.I have an application which at the click of start button starts around 30 non UI threads .These threads threads perform their tasks asynchronously and hence die asynchronously(i.e. thread 1 or 2 main not die before thread 5) .Now i want that as soon as ALL of these threads ar dead, the progressbar which statred at click of start,stops and another dialog pops up(i.e. some UI tasks are performed).
    Hoping for ace!
    Regards,
    Mansi

    Hi,
    maybe a more complex solution, but this should work as well if you know the number of workers to be created in advance:
    1) in your ActionHandler implementation, create a Runnable that will trigger starting the task and execute it (e.g. using a ThreadPoolExecutor) - so this task is off the EDT (EventDispatchingThread)
    2) the Runnable just created sets up a CountDownLatch initialising it to the number of workers to be created
    3) each worker will receive the CountDownLatch as a parameter and call "countDown()" on it as soon as he finished his job
    4) the Runnable created to trigger the worker threads simply calls await() on the CountDownLatch after all workers have been started/submitted to a ThreadPoolExecutor
    5) as soon as the last worker has finished, the CountDownLatch will return from its await() method and allow the Runnable created to trigger the workers to continue its work, e.g. notify the UI that the progressbar may disappear.
    Of course, this relies on java.util.concurrent classes and thus is not available in JDKs earlier than 1.5.
    Bye.

  • How to find out FICO user exits that are used by User

    How to find out the FICO user exits that are used by user.

    Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
    pls assign points if helpful as a way to say thanks.

  • How to find out total of number of users accessing Hyperion Planning applications ?

    Hi All,
    Could someone help me with the details of how to find out total number of users who are accessing Hyperion Planning application in Env.?
    This is with regard to licenses so wanted accurate and unique information,
    Thanks
    Amith

    Hello Amith,
    I think you should have a look at the blog of Cameron Lackpour http://camerons-blog-for-essbase-hackers.blogspot.be/
    In the "Shared Services Stupid Trick" blogs, he shows how to find the real access to an application. The side benefit is that it is amusing to read.
    In how far this is OK for the licenses is written on another page. You likely need to use the same method as Oracle does. Ask the Salesperson how to do this. (I am curious what his/her reply is).
    Regards,
    Philip Hulsebosch.

  • How to find out which jobs are connected to the user

    Hello, i have a question, but i was unable to find the answer. The problem is that our internal consultant left the company, and there are certain jobs that run under his account. We want now to switch this jobs to other accounts. The problem we are facing is how to find out what jobs, or job steps are connected with his account, so we can safely demote his account, so that no other jobs will be run under his account. Thank you very much
    Sincerely,
    Luka Prijic

    the only reliable way to do this is by scanning table TBTCP using the person's userID in field AUTHCKNAM and filtering by job statuses: scheduled, released, ready and active (sorry I can't remember the code#'s off top of my head, something like P=scheduled, S=scheduled...you have to look it up).   When you search SM37 it only permits you to scan by the userID who created the job, but it won't tell you if a different userID is defined in a job step.  That's why you need to scan TBTCP.  Don't forget that you should also check for a user's open Workflow items before deletion.
    I noticed some posts in this forum that suggest a userID should never be deleted, only locked, added to a special user group, and all role assignments removed.  However I've never worked somewhere that does this.

  • I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

    I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

    You may be able to find your Apple ID at Look up your old and forgotten Apple ID

  • How do you find out what your Apple ID password is?

    A friend of mine forgot their Apple ID password and can't log in. They also don't have access to their email, but that's not the issue. He wants to know how you find out what your current Apple ID password is. He awnsered his security questions but all it would let him do is reset his password, without finding out what his current one is. How do you find out your Apple ID password?

    You can't recover a password, only change it. The reason for this is that Apple has changed their conditions for passwords. They now need to have one upper case letter, 1 number, and be at least 8 characters. Also you cannot use any password you have previously used in the last year.

  • TS4268 how i can download facetime for my iphone4s.i couldn't find out it in apple store also.please help me....

    how i can download facetime for my iphone4s.i couldn't find out it in apple store also.please help me...

    You don't download it.  it is built in to your iphone, unless it was originally purchased from one of the Middle eastern countries where it is not allowed.
    You should not leave your e-mail on a public forum.
    iPhone User Guide (For iOS 6 Software)

  • How do I find out if my apple TV is a 2 or 3 - it was purchased mid 2012 but was new in a box but second hand.

    How do I find out if my apple TV is a generation 2 or generation 3 - it was purchased mid 2012 but was new in a box but second hands so the release datesw for the generation 3 do not help.  I do not know the original purchase date.

    Welcome to the Apple community.
    Apple TV 3 has 1080p written on the box.

  • HT5625 I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    A wet phone is out of warranty. This is considered user damage. Even if you were able to get it to start now, the chances of it working for long are slim. I suggest going to Apple and see about an OOW replacement. One for the iPhone 4 is only $149USD and it would come with a short warranty. It is a refurbished device and you would not be worried about encountering additional problems.

  • How do I find out if my iTunes ID is the same as my iCloud password?

    How do I find out if my iTunes password is the same as my iCloud password?

    Hello jenny86753092008,
    Welcome to the Apple Support Communities! Your iTunes and iCloud passwords will always be the same unless you have multiple accounts with us. To check to see if you have multiple accounts, you can use this handy Apple ID tool:
    Apple - My Apple ID
    https://iforgot.apple.com/appleid
    You can also contact us for assistance to see if you have multiple Apple ID accounts:
    If you forgot your Apple ID password - Apple Support
    http://support.apple.com/en-us/HT201487
    Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
    Cheers,
    Matt M.

Maybe you are looking for

  • I can Simulate SC-2345 with NI-DAQmx, but can't simulate input values per channe

    Hi, I  can simulate the device sc-2345 with NI-DAQmx but I can not simulate any value for an individual analog input. I can't assign (simulate) a value or waveform to any individual input associated physically with modules SC-AI03 and SC-AI04.  Thank

  • IPod unmounts when downloading photos imported via iPod camera connector

    I've got a fifth generation (video) iPod. I recently purchased an iPod camera connector and used it on a recent trip. I took over 500.jpgs and transfered them successfully from my Nikon D200 camera to my iPod. Now I'm trying to download them into iPh

  • Check if email address exists before creating account

    Hi all, Is there a way to check if the email address chosen when creating a new account isn't already used by another account ? Thanks, Ben

  • Questions on upgrade from 11.5.9 to 12.1.2

    Hi There, We are currently in oracle application 11.5.9 and planned upgrade to 12.1.2 We would like to know the following 1. Is there any change in the table structure of OM, AR and GL modules in 12.1.2 when compared to 11.5.9 2. What would happened

  • Migrating to a new mac

    Hi! I just installed my new macbook pro, which runs Snow Leopard and CS4, and I was wondering what was the best way to transfer my documents and preferences from my old macbook pro which runs Leopard and CS3. Obviously I don't want to migrate my syst