How to find out if my system allows for a SSD upgrade

Hi,
I've X1 Carbon that was bought in last december. It says type 3444 - 9FU.
I've only 180 GB, I want to know if I could upgrade this to 512GB or more if possible?
How do I find out if my system will allow this?
Thanks in advance.
Solved!
Go to Solution.

Hi,
X1C model (not the new one, 2014 Gen 2) utilizes Lenovo proprietary connector for SSD drive, named SFF, Small Form Factor. So it's very difficult to find out compatible drive on the market for upgrade except of the purchase it from Lenovo.
Lenovo x1c drives p/n (FRU) are:
45N8303 - SSD 256GB 3.7mmH Toshiba SFF Panther-256
45N8423 - SSD 240GB FDE 3.7mmH Intel SFF Cherry Crest-240 FDE
45N8483 - SSD 256GB 3.7mmH SanDisk SFF X100-256
X1C model also supports (PSREF and Lenovo support site mentiones about that capability) halfsized msata SSD in mini pci-e formfactor. Find it on the market and install yourself in addition to your existing SSD. Be attentive, halfsize (not fullsize), mini pci-e (not m.2), msata (not pci). Lenovo doesn't provide p/ns for that msata SSD.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Similar Messages

How to find out whether the system user is a vendor or a purchaser

Hi,
I am working in SRM 5.0. I have a requirement that some fields of Bid invitation can be visible by purchaser but not to bidder.
How to find out whether the system user (user id though which system logged in) is a vendor or a purchaser. Kindly help me to resolve this issue.
Sushmita Singh

check his role.
is surrogate bidding available for that bidder.
via surrogate bid , purchaser can submit bid on behalf of the bidder.
masa is correct
pposa_bbp - search via user . so he might be a purchaser.
maintain business partner -supply your bidder bp number -edit
go to bidder data .Under bidder data you must flag "PERMIT PROXY BIDDING"
regards
Muthu
br
muthu

What is ilife ?? is it comes with macbook pro 13in ?? how to find out in the system

what is ilife ?? is it comes with macbook pro 13in ?? how to find out in the system?? I am using OSX 10.8.5

These are the iLife applications:
http://www.apple.com/ilife/
They come with every new Mac. If they are not in your applications folder, download them from the App store.
Ciao.

How to find out relevant Infosources and Infocubes for Datasources (LO)

Hi Gems,
I am new to BW.
How to find out relevant Infosources and Infocubes for Datasources for LO Cockpit
any help site pls.
Thanks in advance

1. make sure that your datasources have activated (trans RSA5 in SAP Source System) from the SAP Source system (Ex: R/3 or SCM System)
2. after that you have to run trans RSA9 in SAP Source System to transfer new datasource in to BI System.
3. log-on into BI System, run trans RSA1, choose SourceSystem Tab in the left panel. Right click on to your SAP Source System then choose Replicate.
4. in the left panel choose BI Content tab, select infoObjects by infoArea.
5. then Click on Grouping, select in Dataflow Before and afterward. Click Collection Mode, select Collect Automatically.
6.in the middle panel, expand "Supply Chain Management" infoArea, select both Characteristics: Logistics General and Key Figures: Logistics General. Right click on it and select Insert Objects for Collections.
7. After the objects have been inserted into Collected Objects then choose install with option Install in Background.
8. Wait for the result.
Pls give point if you see its helpful.
Regards,
Chuong Hoang

How to find out the Number range object for Incident number

How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanya

HI, an example.
data: vl_num type i,
 vl_char(6) type c,
 vl_qty type INRI-QUANTITY,
 vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
 NR_RANGE_NR = '01'
 OBJECT = 'ZRG0000001'
 QUANTITY = '1'
SUBOBJECT = ' '
TOYEAR = '0000'
IGNORE_BUFFER = ' '
IMPORTING
 NUMBER = vl_num
 QUANTITY = vl_qty
 RETURNCODE = vl_rc
EXCEPTIONS
 INTERVAL_NOT_FOUND = 1
 NUMBER_RANGE_NOT_INTERN = 2
 OBJECT_NOT_FOUND = 3
 QUANTITY_IS_0 = 4
 QUANTITY_IS_NOT_1 = 5
 INTERVAL_OVERFLOW = 6
 BUFFER_OVERFLOW = 7
 OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard

How to find out the Idoc number triggered for any material transfer frm SAP

Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.

Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish

How to find out the last time login for a locked login account?

In ASE 15.4,there are many login account show as locked and unlocked. How to find out the last login time for those locked login account?

Thank you. The version of my ASE is 12.5.4.
This is what I got from select * from syslogins:
suid status accdate totcpu totio spacelimit timelimit resultlimit dbname name password language pwdate audflags fullname srvname logincount procid
1
30 2 10/25/2012 11:41:10.430 AM 0 0 0 0 0 . . ... us_english 02/24/2.0.08 12:55:38.640 PM 0 [NULL] [NULL] [NULL] [NULL]
this is what I got from exec sp_displaylogin 'mylogin':
1 Suid: 46
2 Loginame: mylogin
3 Fullname: FN LN
4 Default Database: mydb
5 Default Language: us_english
6 Auto Login Script:
7 Configured Authorization:
8 Locked: YES
9 Date of Last Password Change: Apr 17 2010 2:36PM
10 Password expiration interval: 0
11 Password expired: NO
12 Minimum password length: 6
13 Maximum failed logins: 0
14 Current failed login attempts:
15 Authenticate with: AUTH_DEFAULT
which one is for last login time?

How to find out my four number password for iphone4, how to find out my four number password for iphone4

how to find out my four number password for iphone4, how to find out my four number password for iphone4

There is no way to find out your four number password for your iPhone. If there were there would be no point in having a passcode. You can reset the phone as described here: http://support.apple.com/kb/HT1212.
There is no way to find out your four number password for your iPhone. If there were there would be no point in having a passcode. You can reset the phone as described here: http://support.apple.com/kb/HT1212.

How to find out back end mapping program for Idoc ?

HI Experts,
Iam new to ALE IIDOCS .. i have a issue in existing idoc .
Some data maping problem is there in the existing idocs
I need to find out back end program for this perticular idoc no .
Exactly where they have written the maping code .
How to find out this ?
is there any preceedure to trace the back end program based on the idoc number .
Regards
RameshG

Hi Ramesh,
If you are looking at Inbound que then we generally double click on idoc go to control datat info and then take partner data info there
Goto we20 check teh system and there double click the message type and there in inbound option double clik the porcess code it gives you one FM where you can see logic written to process that IDOC
Regards,
Poornima

How to find out the SET PARAMETER ID for FB02 transaction

hi masters,
i m working on a alv report and in that i have to make a BELNR field as a interactive field. i m using the 'user command' for this.
FORM user_command USING ucomm TYPE sy-ucomm
                    selfield TYPE slis_selfield.
IF selfield-value IS NOT INITIAL.
    CASE selfield-fieldname.
      WHEN 'BELNR'.
        SET PARAMETER ID 'FBAS' FIELD selfield-value.
        CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
      WHEN OTHERS.
        MESSAGE text-000 TYPE 'W'.
    ENDCASE.
ENDIF.
ENDFORM.                    "user_command
i used this code using this. using this code my program goes to FB03 tc but it don't shows the data of BELNR what i was clicked. it always shows first BELNR no. in the table. plz anyone help me for this..
the SET PARAMETER ID 'FBAS' i m using is right? if not plz suggest me how to find out correct one?

Hi Vicky,
To know the Parameter Id of any field in a transaction ,
you just press F1 onthe particular field then in technical settings under Field data
you can see the PARMATER ID.
So if you check like this you can see 'BLN' as parameter id for Document number in FB03
transaction
Regards,
Manoj Kumar P

How to find out the idoc type required for our requirement

Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
Prasanna

Hi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A

In DBI , how to find out the Source Query used for the Report

Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj Shrivastava

Hi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu

How to find out the standard info stucture for a customized IS in LIS

Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
Saddy

Hi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy

How to find out CPU and memory usage for an instance?

Hi DBA Gurus,
How to find out CPU usage and memory usage for an instance?
Any information is appreciated!
Thank you!
Robert

you can calculate cpu usage by adding fallowing three factors which you can get from v$sysstat
1. Parse CPU time : This represents the percentage of CPU time spent parsing SQL statements. Parse time CPU can be a strong indication that an application has not been well tuned. High parse time CPU usually indicates that the application may be spending too much time opening and closing cursors or is not using bind variables.
2. Recursive CPU time : Sometimes, to execute a SQL statement issued by a user, the Oracle Server must issue additional statements. Such statements are called recursive calls or recursive SQL statements. For example, if you insert a row into a table that does not have enough space to hold that row, the Oracle Server makes recursive calls to allocate the space dynamically if dictionary managed tablespaces are being used.
Recursive calls are also generated due to the inavailability of dictionary info in the dictionary cache, firing of database triggers, execution of DDL, execution of SQL within PL/SQL blocks, functions or stored procedures and enforcement of referential integrity constraints
3. Other CPU time : This represents the percentage of time spent looking for buffers, fetching rows or index keys, etc. Generally, \"Other\" CPU should represent the highest percentage of CPU time out of the total CPU time used.
total memory used you can calculate adding
total_agrigate_area+sga
memory usage on os level you can know by fallowing commands
vmstat 5 20 depending upon os

How to find out SAP J2EE Patch Level for 04s

Hi all
I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the PatchLevel for WAS 7.0 , J2SE used is 1.4.2_09
Thanks in Advance !!
Asif

Thanks Kenny ,
But as you can see from version.txt file for Server0 it does not mention PatchLevel it is
blank
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
i also checked version.txt for dispatcher it is as below
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
servers it is mentioned
so can u give some inference based on above descriptions about What should be SAP J2EE Patch
Level for the 2004s servers
Regards !!
Asif

How to find out if my system allows for a SSD upgrade

Similar Messages

Maybe you are looking for