How to find out MIGO or MIRO without account document

hi,can somebody tell he how to find out MIGO / MIRO withou account document,because my client want to check GL of GR/IR with MIGO&MIRO.
in theory,MIGO - MIRO = GR/IR balance,but if no FI document generated from migo or miro for some reasons,they two do not reconcile,right?

If no Fi document, then there is no GR/IR account in picture. so there is no question of reconciliation.

Similar Messages

How to find out MIGO or MIRO without FI document

hi ,can somebody tell me how to find out those MIGO & MIRO wihtout FI doucment ,thanks

hi
u can use MB5S for the grir balances
or u can use MR11
or use ME80FN here execute the report and then select the PO history mode u will get all the pos which have been processed and the gr and ir quantity and value will be there
also u can refer ME2N here in Scope of list choose ALV and in selection parameters WE102
here u will get list of all pos with GR
regards
KI

How to find out portlet instance type without using PortletInstanceInternal

Does anyone know how to find out the instance type of a portlet using the API? The instance type corresponds to INSTANCE_TYPE column in PF_PORTLET INSTANCE table.

Does anyone know how to find out the instance type of a portlet using the API? The instance type corresponds to INSTANCE_TYPE column in PF_PORTLET INSTANCE table.

How to find out SD billing doc # using accounting doc number ?

Hi Experts,
Using accounting doc tables such as BKPF , BSEG and BSID , I need to find out respective SD billing doc no when I have accounting doc number.
The issue is I cannot use either 'reference number' or assignment number' because the same numbers are not flowing to accounting doc from SD ( enabled by a enhacement ).
Regards
Mahesh.

Hi,
In BKPF : AWKEY / XBLNR with these fields we can identify the SD billing document number.
In BSEG table VBELN field is Billing document number
Or
Goto T.Code FB03 enter the accounting document number,company code and fiscal year and press enter.
select the line and choose details, choose addtional data tab, here we can see the billing document number.
Regards,
Chandrasekhar.S

How to find Invoice number linked to FI accounting document number ??

Hello All,
I have been looking around for all possible combinations to find the link between FI accounting document number (BSEG-BELNR) and Intercompany Invoice number (for which billing corr. to STOs' or POs' is done).
The requirement is that during ERS posting, we have accounting document numbers (BSEG-BELNR) and associated STOs' for this (BSEG-EBELN), but we are unable to map the Intercompany Billing Invoice number(s) (where the billing corr. to STOs' obtained from BSEG-EBELN) to this accounting document number (BSEG-BELNR).
Any pointers or detailed view solution would be of great help.
Thanks,
Ansh

Hello DPM,
Thank you for the descriptive help. But my requirement is to look for Intercomapny Billing number (VBRK-VBELN) linked to an accounting document number (BSEG-BELNR) and not Invoice Receipt Number.
The steps that I am following are:
From BSEG, found EBELN (Stock Transfer Order) and XREF3 (Reference Key, combination of fiscal yr., some ref. number, maybe GR no. and ref item no.), based on BELNR (Accounting document number).
From EKBE, found XBLNR (Reference Delivery Number or Direct Intercompany Billing Number on which GR is done) based on
EKBE - EBELN = BSEG - EBELN
EKBE - BELNR = BSEG - XREF3 (only ref and item no., considering it to be a GR no.)
EKBE - VGABE = '1' and EKBE - BEWTP = 'E'.
From VBRP, found VBELN (Intercompany Billing No., which is a desired number) based on
VBRP - AUBEL = EKBE -EBELN (Stock Transfer Order)
VBRP - VGBEL = EKBE - XBLNR (Delivery number)
Here, I am not sure about 2 things:
Whether the reference no in BSEG-XREF3 will always be Goods Receipt number for Stock Transfer Order or not. If not, then what it can be and how I will have to proceed further then.
Secondly, If in case for an accounting document number, I have 2 Stock Transfer orders (BSEG - EBELN) and same reference number (BSEG-XREF3), then from History table (EKBE) I get only single delivery based on which GR was doen for both STOs', then I shall be getting single Intercompany Billing Invoice from VBRP or different ?
Kindly provide your inputs.
Thanks,
Ansh

How to find out your restrictions code without knowing it

I forgot my restriction passcode I don't know how to disable it

Forgotten RESTRICTIONS Passcode
- Place the iOS device in Recovery Mode and restore via iTunes. For how to restore: iTunes: Restoring iOS software
You have to either:
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod

How to find out if file contents under some document library SPListItem has changed

hi,
I am building a Sync tool which will Sync SharePoint document library to some other service(e.g. FTP). I have added event handlers on the document library for ItemAdded, ItemUpdated etc.. etc.
Now i have one problem, when ever a file is updated (either custom properties and/or file content) then there is no way to check if its updating of content or custom fields. So everytime i need to upload my file to that FTP location. I want to get some indication
that this time file content is updated not the custom fields, or file content with custom fields are updated.
I have checked After and Before properties but its of no use. When ever you rename a file or just open the edit dialogbox and save it without updating any thing, all after and before properties are same :(
Need some solution for this, any help suggestion is appriciated.
Syed Shoaib Adil Senior SharePoint Developer Boston, Ma, USA

Sorry for late reply.
1st link (storing file hash/MD5) is not a solution for me as i have many Office documents
2nd link doesnt have nay answers
Archive Folder is not a solution. How can i find if current item SPFile has content changes?
I already have my custom fields with each SPListItem. How can i find in itemUpdating/ed that if file content is changed? to make my custom field ture?
Syed Shoaib Adil Senior SharePoint Developer Boston, Ma, USA

How to find out the node count?

How to find out the node count in illustrator document through programmatically. Kindly advice me.

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

How to find out which sub query returns more than one row

Hi all,
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .
/* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */
SELECT a.*, ROWNUM AS rnm
FROM (SELECT DISTINCT '1' AS "Page View", ou.org_unit_name AS "Org",
                        prxm.mbr_idntfr AS "Beneficiary ID",
                           md.last_name
                        || ', '
                        || md.first_name AS "Beneficiary Name",
                        pci.idntfr AS "Tracking No.",
                        TO_CHAR (TRUNC (req.pa_rqst_date),
                                 'MM/dd/yyyy'
                                ) AS "Request Date",
                        sts.status_name AS "Status",
                        req.pa_rqst_sid AS "Request #",
                        prxm.mbr_sid AS "Mbr_sid",
                        TO_CHAR
                              (TRUNC (req.pa_revision_date),
                               'MM/dd/yyyy'
                              ) AS "Last Updated",
                        TO_CHAR (psd.TO_DATE, 'MM/dd/yyyy') AS "TO_DATE",
                        prxpl.prvdr_lctn_iid AS "PRVDR_LCTN_IID",
                        pd.prvdr_sid AS "PRVDR_SID", 'Y' AS "State View",
                        DECODE
                           ((SELECT DISTINCT pd.national_prvdr_idntfr
                                        FROM pa_request_x_provider_location prxplo
                                       WHERE prxplo.pa_rqst_sid =
                                                               req.pa_rqst_sid
                                         AND prxplo.oprtnl_flag = 'A'
                                         AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            0, (SELECT prxplo.prvdr_lctn_idntfr
                                  FROM pa_request_x_provider_location prxplo
                                 WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                   AND prxplo.oprtnl_flag = 'A'
                                   AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            NULL, (SELECT prxplo.prvdr_lctn_idntfr
                                     FROM pa_request_x_provider_location prxplo
                                    WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                      AND prxplo.oprtnl_flag = 'A'
                                      AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            (SELECT DISTINCT pd.national_prvdr_idntfr
                                        FROM pa_request_x_provider_location prxplo
                                       WHERE prxplo.pa_rqst_sid =
                                                               req.pa_rqst_sid
                                         AND prxplo.oprtnl_flag = 'A'
                                         AND prxplo.pa_prvdr_type_lkpcd = 'RR')
                           ) AS "NPI/ID",
                        DECODE
                           ((SELECT pd.org_bsns_name
                               FROM pa_request_x_provider_location prxplo
                              WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                AND prxplo.oprtnl_flag = 'A'
                                AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            NULL, (SELECT    pd.last_name
                                          || ', '
                                          || pd.first_name
                                          || ' '
                                          || pd.middle_name
                                     FROM pa_request_x_provider_location prxplo
                                    WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                      AND prxplo.oprtnl_flag = 'A'
                                      AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            (SELECT pd.org_bsns_name
                               FROM pa_request_x_provider_location prxplo
                              WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                AND prxplo.oprtnl_flag = 'A'
                                AND prxplo.pa_prvdr_type_lkpcd = 'RR')
                           ) AS "Prvdr Name",
                        TO_CHAR (psd.from_date,
                                 'MM/dd/yyyy'
                                ) AS "Srvc From Date",
                        TO_CHAR (req.validity_start_date,
                                 'MM/DD/YYYY'
                                ) AS "Due Date",
                        (fn_get_busniess_days (TRUNC (req.validity_start_date))
                        ) AS "Days<br>Left",
                        req.pa_mode_type_lkpcd AS "Source",
                        TO_CHAR (TRUNC (wmdtl.rtng_date),
                                 'MM/dd/yyyy'
                                ) AS "Assigned On",
                        NVL (wmdtl.assigned_to_user_name,
                             'Not Assigned'
                            ) AS "Assigned To",
                        req.org_unit_sid AS "OrgUnitSid",
                        TO_CHAR
                             (wmdtl.modified_date,
                              'MM/dd/yyyy hh24:mi:ss'
                             ) AS "WTRD_MODIFIED_DATE",
                        TO_CHAR (wmdtl.rtng_date,
                                 'MM/dd/yyyy'
                                ) AS "WTRD_RTNG_DATE",
                        req.status_cid AS "PA_STATUS_CID",
                        TO_CHAR (req.modified_date,
                                 'MM/dd/yyyy'
                                ) AS "PA_REQ_MODIFIED_DATE",
                        prs.state_pa_srvc_type_code
                                                 AS "STATE_PA_SRVC_TYPE_CODE",
                        wmdtl.wm_pa_task_rtng_dtl_sid
                                                    AS "WM_TASK_RTNG_DTL_SID",
                        wmdtl.assigned_to_user_acct_sid
                                          AS "WTRD_Assigned_to_user_acct_sid",
                        (fn_get_busniess_days (TRUNC (req.validity_start_date))
                        ) AS "Days<br>LeftSort",
                        wmdtl.assigned_to_org_unit_sid
                                              AS "WTRD_Assigned_to_OrgUntSid",
                        DECODE
                           ((SELECT COUNT (*)
                               FROM pa_request_status prs
                              WHERE prs.pa_rqst_sid = req.pa_rqst_sid
                                AND prs.status_cid = 5
                                AND prs.oprtnl_flag = 'I'),
                            0, 'N',
                            'Y'
                           ) AS "SHOW_UTILIZATION"
                   FROM   pa_request req,
                         pa_certification_identifier pci,
                         status sts,
                         pa_request_x_member prxm,
                         wm_pa_task_routing_detail wmdtl,
                         pa_service_date psd,
                         org_unit ou,
                         pa_request_service prs,
                         pa_request_x_provider_location prxpl,
                         provider_location pl,
                         provider_detail pd,
                         provider p,
                         mbr_dmgrphc md
                  WHERE req.oprtnl_flag = 'A'
                    AND req.status_cid NOT IN
                                 (20, 30, 70, 25, 80, 96, 85, 5, 97, 98, 101)
                    AND req.org_unit_sid IN
                           (3057, 3142, 3058, 3143, 3059, 3144, 3060, 3145,
                            3061, 3146, 3062, 3147, 3063, 3148, 3064, 3149,
                            3065, 3150, 3066, 3151, 3067, 3152, 3068, 3153,
                            3069, 3154, 3070, 3155, 3071, 3156, 3072, 3157,
                            3073, 3158, 3074, 3159, 3075, 3160, 3076, 3161,
                            3077, 3162, 3078, 3163, 3079, 3164, 3080, 3165,
                            3081, 3166, 3082, 3167, 3083, 3168, 3084, 3169,
                            3085, 3170, 3086, 3171, 3087, 3172, 3088, 3173,
                            3089, 3174, 3090, 3175, 3091, 3176, 3092, 3177,
                            3093, 3178, 3094, 3179, 3095, 3180, 3096, 3181,
                            3097, 3182, 3098, 3183, 3099, 3184, 3100, 3185,
                            3101, 3186, 3102, 3187, 3103, 3003, 75000104,
                            75000108, 2006, 75000103, 75000102, 75000113,
                            75000111, 75000109, 2001, 2009, 75000105,
                            75000107, 2004, 2010, 2013, 2014, 2005, 2011,
                            75000112, 2002, 1001, 2012, 75000106, 2007,
                            75000101, 2003, 75000110, 2008, 3001, 3002, 3019,
                            3104, 3020, 3105, 3021, 3106, 3022, 3107, 3023,
                            3108, 3024, 3109, 3025, 3110, 3026, 3111, 3027,
                            3112, 3028, 3113, 3029, 3114, 3030, 3115, 3031,
                            3116, 3032, 3117, 3033, 3118, 3034, 3119, 3035,
                            3120, 3036, 3121, 3037, 3122, 3038, 3123, 3039,
                            3124, 3040, 3125, 3041, 3126, 3042, 3127, 3043,
                            3128, 3044, 3129, 3045, 3130, 3046, 3131, 3047,
                            3132, 3048, 3133, 3049, 3134, 3050, 3135, 3051,
                            3136, 3052, 3137, 3053, 3138, 3054, 3139, 3055,
                            3140, 3056, 3141)
                    AND req.pa_rqst_sid = prs.pa_rqst_sid
                    AND prs.oprtnl_flag = 'A'
                    AND prs.pa_rqst_srvc_sid = psd.pa_rqst_srvc_sid
                    AND psd.oprtnl_flag = 'A'
                    AND req.pa_rqst_sid = pci.pa_rqst_sid
                    AND pci.oprtnl_flag = 'A'
                    AND req.pa_rqst_sid = prxm.pa_rqst_sid
                    AND prxm.oprtnl_flag = 'A'
                    AND md.oprtnl_flag = 'A'
                    AND md.status_cid = 2
                    AND TRUNC (SYSDATE) BETWEEN md.from_date AND md.TO_DATE
                    AND prxm.mbr_sid = md.mbr_sid
                    AND ou.org_unit_sid = req.org_unit_sid
                    AND ou.oprtnl_flag = 'A'
                    AND req.pa_rqst_sid = prxpl.pa_rqst_sid
                    AND prxm.pa_rqst_sid = prxpl.pa_rqst_sid
                    AND pci.pa_rqst_sid = prxm.pa_rqst_sid
                    AND pci.pa_rqst_sid = wmdtl.subsystem_task_sid
                    AND pci.pa_rqst_sid = prxpl.pa_rqst_sid
                    AND prxpl.pa_prvdr_type_lkpcd = 'RR'
                    AND prxpl.oprtnl_flag = 'A'
                    AND req.status_cid = sts.status_cid
                    AND sts.status_type_cid = 3
                    AND sts.oprtnl_flag = 'A'
                    AND prxpl.prvdr_lctn_iid = pl.prvdr_lctn_iid
                    AND p.prvdr_sid = pd.prvdr_sid
                    AND p.prvdr_sid = pl.prvdr_sid
                    AND pd.oprtnl_flag = 'A'
                    AND pd.status_cid = 2
                    AND TRUNC (SYSDATE) BETWEEN pd.from_date AND pd.TO_DATE
                    AND wmdtl.subsystem_task_sid = req.pa_rqst_sid
                    AND wmdtl.subsystem_lkpcd = 'PA'
                    AND wmdtl.oprtnl_flag = 'A'
                    AND req.pa_rqst_date > (SYSDATE - 365)
                                   ORDER BY TO_DATE ("Request Date", 'MM/dd/yyyy hh24:mi:ss') DESC,
                        "Beneficiary Name" ASC) a
WHERE ROWNUM < 102;regards,
P Prakash
Edited by: BluShadow on 17-May-2011 15:01
added {noformat}{noformat} tags around the code

833560 wrote:
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .This is why smaller, simpler queries are easier to work with than huge ones - when something like this goes wrong smaller queries are much eaiser to debug. Unfortunately using smaller, easier-to-work with queries is not always an option
Ganesh is right - you will have to dissect the big query bit by bit until you find the offending subquery. If there is another way I would like to find out about it too.
The easiest way to do this is probably to use block comments to isolate parts of the query bit by bit until you find the offending part. If you carefully examine the subqueries you might be able to figure out which one is returning multiple rows without commenting everything
Good luck!

How to find out Skype account name

Preface: Sorry, I think this is really simple thing but I tend to be verbose when I'm trying to describe the issue. How would I find out what is my Skype account name? Or more precisely the login name? (I mean of course my own name is on the accout, but I want the "account" name, not the name on the accout, heh) I have an old hotmail account, which has become live/messanger/microsoft account and now after Messanger was removed, Skype account as well. I can login into any of these by logging from the Live/Microsoft account, but what is my Skype account if I want to login using that? On Skype program and website, both list my hotmail address as well as "live:hotmailaddess" part before @ character. But I can't login to Skype using the address, "live:address" or just "address". I can't find anything else on the pages. I tried logging out from the website and then using the recovery option "I want to find out my Skype account" (the website is in Finnish so my translation might not be accurate to what it actually is in English). I typed in the hotmail adress many times since the it asked it for many times a row and continued the steps, finally I typed in the address and capcha , then again it asked the address. I think I made a mistake there, because I think it actually wanted on the last time the alternative address. The website was not too clear about it specially since it wants the address so many times. It displays only a small portion of it and since my alternative address is practically identical to the main address, just an underscore is changed to hyphen, well...So finally it displayed "IF the account address is xxxx for whatever a code has been sent to it". Yeah well since I guess typed in the wrong address, I've received nothing on either. This whole ordeal started today few hours ago when I tried to login to the **bleep** thing. I updated the Skype program, since an upgrade have been around for some time now, and since it always resets the autologin information, I had to manually type them in, and it kept asking for alternative verification address or phone number. There was no way to bypass that. Just to make it clear, it wanted me to give such info, not use the alternative thing since so far I've never given any alternative ways to login or reset account.
Somehow at first I was able to finally get in without giving any alternative info, I kept trying to login over and over, occasionally I tried to login using the "Skype account", but since I don't know the account I could only login using the Live/Microsoft account. Then I logged off from the program, and after that I tried to login back, it wanted to manually login again, and it kept asking from the alt details and I couldn't anyhow bypass that. I also tried logging into Hotmail/Outlook.com from the website as well as Skype(from website), both ways wanted the info but to both I finally somehow managed to get in. I mean the websites, logging inside the program failed all the time. Anyway finally I remembered I had made the second account so I figured I give it as alt address. I got that thing in OK, the second address just has hotmail.com, so I could easily login there by another browser and that didn't want any extra verifications. But before this last attempt, I had used the same "I want to know my Skype ID" feature from the program. To clarify, before linking the second address to my main address. But since I was having so much trouble with getting into Skype(and as well as it's Messanger part) I think I didn't check them out. Plus I had trouble getting into the mail as well, although I finally got in. Soooo...the two mails received in the primary address, "Your Skype Name token" messages which have a link and verification number, they won't work anymore. I try either, and neither works. My guess is they got invalidated by the third request or by either finally adding the alternative address. AND, since the third time I mistook it asking the same **bleep** address for the third or fourth time in the last request and gave the main address not the alt address it probably didn't send the code anywhere. And now I tried again the thing but it refuses to go any further than the first step, because it says I've used it too often in the last 24 hours. So, surely the account name should read someplace?I repeat, I can perfectly login into Skype in web and the program, I know the password and hotmail addresses and all that, but the two types of accounts it lists after logging in, neither work for login. Or does it mean I don't actually have a Skype account, just the Live/Microsoft account which I can only use to login to Skype using that other option? I'm starting to think this is the case.

I am definetly starting to think I don't actually have a skype name. Now I tried again since the 24 hour restriction went off. First from Skype webpage ->sign in -> forgotten your skype name? ->there I enter my hotmail address ->send mail ->then it moves off from Skype and into account.live.com, where it's no longer asking anything Skype related: Why are you having trouble signing in?I forgot my passwordI know my password, but can't sign inI think someone else is using my Microsoft account
So I obviously choose the second option last time since it's the closest available option for my problem, but then it gives me options: Get back into your accountWe can help you reset your password and security info. First, enter your Microsoft account and the characters shown. So again it asked for my address and captcha, and after that I could choose to "verify my identity" by choosing the alt email, but since that is slight garbled and cannot be differented from the primary address, and I was already so pissed off from typing the same address over and over, so at that point I mistakenly wrote the main address again where it wanted to verify it by asking the whole alternative address and thus it never sent the account reset email for the Microsoft/Live account. But since I originally had no problems with that Microsoft account, all I wanted was the "Skype Name", and since the only way to try to find it jumps into the restore Microsoft account thing, I'm assuming I don't have one which I could use to login to Skype, so all I can use is the Microsoft/Live account.

How to find out selected AssignedStory or Link?

Hello to all,
can anyone pls. explain how to find out which assigned story or link is selected at the time the script is fired.
My problem is this: I would like to place an image into selected rectangle which is exported into .icml. So, for example, you have few exported rectangles and you would like to place an image into the one which is selected (through link or assignment panel). Because you can not select a rectangle in InCopy like you can in InDesign I tried to take a look through assigned stories...
                   For aCounter As Integer = 1 To myDocument.Assignments.Count
                        Dim myAssignment As InCopy.Assignment = myDocument.Assignments.Item(aCounter)
                        For sCounter As Integer = 1 To myAssignment.AssignedStories.Count
                            Dim myAssignedStory As InCopy.AssignedStory = myAssignment.AssignedStories.Item(sCounter)
                            Dim myStoryRef As Object = myAssignedStory.StoryReference
                            find out if assigned story or story reference is selected
                            'Rectangle
                            If TypeName(myStoryRef) = "Rectangle" Then
                                Dim myObjectRectangle As InCopy.Rectangle = myStoryRef
                                If myObjectRectangle.Graphics.Count = 0 And myObjectRectangle.Images.Count = 0 Then
                                    'CheckOut if needed
                                    'Place Media
                                End If
                            End If
                        Next
                    Next
Kind regards,
Marko

Well,
I couldn't solve this without using a placeholder image. I found that you need to check if the selection is an image and than replace that image... So something like this below:
                'Check if there is a selected image for relink
                If myDocument.Selection.Count = 1 Then
                    If TypeName(myDocument.Selection.Item(1)) = "Image" Then
                        myImage = myDocument.Selection.Item(1)
                        myImageLink = myImage.ItemLink
                        Dim msgRet As MsgBoxResult = MsgBox("Would you like to relink selected image?", MsgBoxStyle.YesNoCancel, "Relink seleceted image?")
                        If msgRet = MsgBoxResult.Yes Then
                                    ' DO some action
                                    Dim MediaLink As String = something...
                                            'CheckOut action
                                            If myCheckOutMenu.AssociatedMenuAction.Enabled() Then
                                                myCheckOutMenu.AssociatedMenuAction.Invoke()
                                            End If
                                            myImageLink.Relink(fileLink)
                                            Try
                                                myImageLink.Update()
                                            Catch
                                            End Try
Hope this helps.
Regards,
Marko

Get "404 Not Found" after deployment. How to find out correct URL?

To the experienced:
In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
I then used this url to invoke the deployed application in a browser:
http://localhost:8888/ZB/faces/staff/login.jspx
But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
Many thanks for your help!
Newman

Hi, Arun,
Thank you for the suggestion. I tried it but got the same error.
I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
http://localhost:8888/ZB/faces/staff/login.jspx
And I got the same "404 Not Found" error.
There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
All ideas and suggestions are very much appreciated!
Newman

How to find out the locale setting in a browser?

In my Java web project, the multi-lingual issue on the JSP pages is handled by JSTL. It works fine so far for any input messages. However, some messages come from the container. It is needed to find out the browser's country and language settings inside of the container. My question is how to find out the settings?
Thanks in advance.
v.

Hi, this I found on James' website--see http://www.rf.net/~james/perli18n.html#Q28
Q28. Can web servers automatically detect the language of the browser and display the correct localized page?
A28. Yes. HTTP/1.1 defines the details of how content negotiation works, including language content.
WWW browsers send an Accept-Language request header specifying which languages are preferred for responses. This technique works fairly well, although some versions of Netscape Navigator send an improperly formatted request parameter. Also, switching language preferences in either Navigator or IE 4 doesn't always "take" without first deleting a language hint.
Few sites do content-negotiation on language, and interestingly enough I do not know of any major portals doing this. One site that does is Sun's documentation library at SunDocs. Debian.org does a very nice job of using Apache content negotiation wih languages and also has some nice help info too on Setting the Default Language.
Apache's Content Negotiation features will select the right page to return, whether HTML or image file. Annoyingly, the match logic is very literal, so a browser request for en-us will not match a server entry of en except as a last resort. Any other exact match will win over en, even if en-us was first preference.
There are 2 ways of doing content negotiation with Apache: type or variant maps and multiviews.
Variant Maps
In httpd.conf, disable Options Multiviews if configured and add
AddType type-var var
DirectoryIndex index.var
Then create an index.var file like this:
URI: start; vary="type,language"
URI: index.html.en
Content-type: text/html
Content-language: en-GB
URI: index.html.en
Content-type: text/html
Content-language: en-US
URI: index.html.en
Content-type: text/html
Content-language: en
URI: index.html.fr
Content-type: text/html
Content-language: fr-CA
URI: index.html.fr
Content-type: text/html
Content-language: fr
URI: index.html.es
Content-type: text/html
Content-language: es
Multiviews
The multiviews technique works like this. This does add extra server load, as each content directory must be scanned for the variant document names.
index.html is localized into variant documents such as:
index.html.en (or index.en.html)
index.html.fr
index.html.es
index.html (or index.html.html as a reader has recommended) symlinked to one of the above as the last resort.
Here's an example of http.conf directives for this:
# in httpd.conf
AddLanguage en .en
AddLanguage fr .fr
AddLanguage es .es
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
LanguagePriority en es fr de pt
Options Multiviews
# end of httpd.conf fragment
Starting in Apache 1.2, you may also create documents with multiple language extensions.
O'Reilly's Apache - The Definitive Guide, Chapter 6
ApacheWeek article on Language Negotiation
Another ApacheWeek article on Language Negotiation

How to find out the tablename and column name

Hi,
I have inserted a value (say 'I am here') in a table. but i don't know which is getting inserted this value.
Now i want to know which table and colums has this value (I am here). How to find out as without knowing the table name.
Is there any option to get the tablename and colum??.
Please help me.
thanks.

Does nobody document their code anymore?
See my response Re: How to find out a tablename for one possible solution.
HTH
John

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

How to find out MIGO or MIRO without account document

Similar Messages

Maybe you are looking for