How to find out MIGO or MIRO without FI document

hi ,can somebody tell me how to find out those MIGO & MIRO wihtout FI doucment ,thanks

hi
u can use MB5S for the grir balances
or u can use MR11
or use ME80FN here execute the report and then select the PO history mode u will get all the pos which have been processed and the gr and ir quantity and value will be there
also u can refer ME2N here in Scope of list choose ALV and in selection parameters WE102
here u will get list of all pos with GR
regards
KI

Similar Messages

How to find out MIGO or MIRO without account document

hi,can somebody tell he how to find out MIGO / MIRO withou account document,because my client want to check GL of GR/IR with MIGO&MIRO.
in theory,MIGO - MIRO = GR/IR balance,but if no FI document generated from migo or miro for some reasons,they two do not reconcile,right?

If no Fi document, then there is no GR/IR account in picture. so there is no question of reconciliation.

How to find out portlet instance type without using PortletInstanceInternal

Does anyone know how to find out the instance type of a portlet using the API? The instance type corresponds to INSTANCE_TYPE column in PF_PORTLET INSTANCE table.

Does anyone know how to find out the instance type of a portlet using the API? The instance type corresponds to INSTANCE_TYPE column in PF_PORTLET INSTANCE table.

How to find out your restrictions code without knowing it

I forgot my restriction passcode I don't know how to disable it

Forgotten RESTRICTIONS Passcode
- Place the iOS device in Recovery Mode and restore via iTunes. For how to restore: iTunes: Restoring iOS software
You have to either:
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod

How to find out if file contents under some document library SPListItem has changed

hi,
I am building a Sync tool which will Sync SharePoint document library to some other service(e.g. FTP). I have added event handlers on the document library for ItemAdded, ItemUpdated etc.. etc.
Now i have one problem, when ever a file is updated (either custom properties and/or file content) then there is no way to check if its updating of content or custom fields. So everytime i need to upload my file to that FTP location. I want to get some indication
that this time file content is updated not the custom fields, or file content with custom fields are updated.
I have checked After and Before properties but its of no use. When ever you rename a file or just open the edit dialogbox and save it without updating any thing, all after and before properties are same :(
Need some solution for this, any help suggestion is appriciated.
Syed Shoaib Adil Senior SharePoint Developer Boston, Ma, USA

Sorry for late reply.
1st link (storing file hash/MD5) is not a solution for me as i have many Office documents
2nd link doesnt have nay answers
Archive Folder is not a solution. How can i find if current item SPFile has content changes?
I already have my custom fields with each SPListItem. How can i find in itemUpdating/ed that if file content is changed? to make my custom field ture?
Syed Shoaib Adil Senior SharePoint Developer Boston, Ma, USA

How to find out the node count?

How to find out the node count in illustrator document through programmatically. Kindly advice me.

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

How to find out which sub query returns more than one row

Hi all,
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .
/* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */
SELECT a.*, ROWNUM AS rnm
FROM (SELECT DISTINCT '1' AS "Page View", ou.org_unit_name AS "Org",
                        prxm.mbr_idntfr AS "Beneficiary ID",
                           md.last_name
                        || ', '
                        || md.first_name AS "Beneficiary Name",
                        pci.idntfr AS "Tracking No.",
                        TO_CHAR (TRUNC (req.pa_rqst_date),
                                 'MM/dd/yyyy'
                                ) AS "Request Date",
                        sts.status_name AS "Status",
                        req.pa_rqst_sid AS "Request #",
                        prxm.mbr_sid AS "Mbr_sid",
                        TO_CHAR
                              (TRUNC (req.pa_revision_date),
                               'MM/dd/yyyy'
                              ) AS "Last Updated",
                        TO_CHAR (psd.TO_DATE, 'MM/dd/yyyy') AS "TO_DATE",
                        prxpl.prvdr_lctn_iid AS "PRVDR_LCTN_IID",
                        pd.prvdr_sid AS "PRVDR_SID", 'Y' AS "State View",
                        DECODE
                           ((SELECT DISTINCT pd.national_prvdr_idntfr
                                        FROM pa_request_x_provider_location prxplo
                                       WHERE prxplo.pa_rqst_sid =
                                                               req.pa_rqst_sid
                                         AND prxplo.oprtnl_flag = 'A'
                                         AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            0, (SELECT prxplo.prvdr_lctn_idntfr
                                  FROM pa_request_x_provider_location prxplo
                                 WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                   AND prxplo.oprtnl_flag = 'A'
                                   AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            NULL, (SELECT prxplo.prvdr_lctn_idntfr
                                     FROM pa_request_x_provider_location prxplo
                                    WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                      AND prxplo.oprtnl_flag = 'A'
                                      AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            (SELECT DISTINCT pd.national_prvdr_idntfr
                                        FROM pa_request_x_provider_location prxplo
                                       WHERE prxplo.pa_rqst_sid =
                                                               req.pa_rqst_sid
                                         AND prxplo.oprtnl_flag = 'A'
                                         AND prxplo.pa_prvdr_type_lkpcd = 'RR')
                           ) AS "NPI/ID",
                        DECODE
                           ((SELECT pd.org_bsns_name
                               FROM pa_request_x_provider_location prxplo
                              WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                AND prxplo.oprtnl_flag = 'A'
                                AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            NULL, (SELECT    pd.last_name
                                          || ', '
                                          || pd.first_name
                                          || ' '
                                          || pd.middle_name
                                     FROM pa_request_x_provider_location prxplo
                                    WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                      AND prxplo.oprtnl_flag = 'A'
                                      AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
                            (SELECT pd.org_bsns_name
                               FROM pa_request_x_provider_location prxplo
                              WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
                                AND prxplo.oprtnl_flag = 'A'
                                AND prxplo.pa_prvdr_type_lkpcd = 'RR')
                           ) AS "Prvdr Name",
                        TO_CHAR (psd.from_date,
                                 'MM/dd/yyyy'
                                ) AS "Srvc From Date",
                        TO_CHAR (req.validity_start_date,
                                 'MM/DD/YYYY'
                                ) AS "Due Date",
                        (fn_get_busniess_days (TRUNC (req.validity_start_date))
                        ) AS "Days<br>Left",
                        req.pa_mode_type_lkpcd AS "Source",
                        TO_CHAR (TRUNC (wmdtl.rtng_date),
                                 'MM/dd/yyyy'
                                ) AS "Assigned On",
                        NVL (wmdtl.assigned_to_user_name,
                             'Not Assigned'
                            ) AS "Assigned To",
                        req.org_unit_sid AS "OrgUnitSid",
                        TO_CHAR
                             (wmdtl.modified_date,
                              'MM/dd/yyyy hh24:mi:ss'
                             ) AS "WTRD_MODIFIED_DATE",
                        TO_CHAR (wmdtl.rtng_date,
                                 'MM/dd/yyyy'
                                ) AS "WTRD_RTNG_DATE",
                        req.status_cid AS "PA_STATUS_CID",
                        TO_CHAR (req.modified_date,
                                 'MM/dd/yyyy'
                                ) AS "PA_REQ_MODIFIED_DATE",
                        prs.state_pa_srvc_type_code
                                                 AS "STATE_PA_SRVC_TYPE_CODE",
                        wmdtl.wm_pa_task_rtng_dtl_sid
                                                    AS "WM_TASK_RTNG_DTL_SID",
                        wmdtl.assigned_to_user_acct_sid
                                          AS "WTRD_Assigned_to_user_acct_sid",
                        (fn_get_busniess_days (TRUNC (req.validity_start_date))
                        ) AS "Days<br>LeftSort",
                        wmdtl.assigned_to_org_unit_sid
                                              AS "WTRD_Assigned_to_OrgUntSid",
                        DECODE
                           ((SELECT COUNT (*)
                               FROM pa_request_status prs
                              WHERE prs.pa_rqst_sid = req.pa_rqst_sid
                                AND prs.status_cid = 5
                                AND prs.oprtnl_flag = 'I'),
                            0, 'N',
                            'Y'
                           ) AS "SHOW_UTILIZATION"
                   FROM   pa_request req,
                         pa_certification_identifier pci,
                         status sts,
                         pa_request_x_member prxm,
                         wm_pa_task_routing_detail wmdtl,
                         pa_service_date psd,
                         org_unit ou,
                         pa_request_service prs,
                         pa_request_x_provider_location prxpl,
                         provider_location pl,
                         provider_detail pd,
                         provider p,
                         mbr_dmgrphc md
                  WHERE req.oprtnl_flag = 'A'
                    AND req.status_cid NOT IN
                                 (20, 30, 70, 25, 80, 96, 85, 5, 97, 98, 101)
                    AND req.org_unit_sid IN
                           (3057, 3142, 3058, 3143, 3059, 3144, 3060, 3145,
                            3061, 3146, 3062, 3147, 3063, 3148, 3064, 3149,
                            3065, 3150, 3066, 3151, 3067, 3152, 3068, 3153,
                            3069, 3154, 3070, 3155, 3071, 3156, 3072, 3157,
                            3073, 3158, 3074, 3159, 3075, 3160, 3076, 3161,
                            3077, 3162, 3078, 3163, 3079, 3164, 3080, 3165,
                            3081, 3166, 3082, 3167, 3083, 3168, 3084, 3169,
                            3085, 3170, 3086, 3171, 3087, 3172, 3088, 3173,
                            3089, 3174, 3090, 3175, 3091, 3176, 3092, 3177,
                            3093, 3178, 3094, 3179, 3095, 3180, 3096, 3181,
                            3097, 3182, 3098, 3183, 3099, 3184, 3100, 3185,
                            3101, 3186, 3102, 3187, 3103, 3003, 75000104,
                            75000108, 2006, 75000103, 75000102, 75000113,
                            75000111, 75000109, 2001, 2009, 75000105,
                            75000107, 2004, 2010, 2013, 2014, 2005, 2011,
                            75000112, 2002, 1001, 2012, 75000106, 2007,
                            75000101, 2003, 75000110, 2008, 3001, 3002, 3019,
                            3104, 3020, 3105, 3021, 3106, 3022, 3107, 3023,
                            3108, 3024, 3109, 3025, 3110, 3026, 3111, 3027,
                            3112, 3028, 3113, 3029, 3114, 3030, 3115, 3031,
                            3116, 3032, 3117, 3033, 3118, 3034, 3119, 3035,
                            3120, 3036, 3121, 3037, 3122, 3038, 3123, 3039,
                            3124, 3040, 3125, 3041, 3126, 3042, 3127, 3043,
                            3128, 3044, 3129, 3045, 3130, 3046, 3131, 3047,
                            3132, 3048, 3133, 3049, 3134, 3050, 3135, 3051,
                            3136, 3052, 3137, 3053, 3138, 3054, 3139, 3055,
                            3140, 3056, 3141)
                    AND req.pa_rqst_sid = prs.pa_rqst_sid
                    AND prs.oprtnl_flag = 'A'
                    AND prs.pa_rqst_srvc_sid = psd.pa_rqst_srvc_sid
                    AND psd.oprtnl_flag = 'A'
                    AND req.pa_rqst_sid = pci.pa_rqst_sid
                    AND pci.oprtnl_flag = 'A'
                    AND req.pa_rqst_sid = prxm.pa_rqst_sid
                    AND prxm.oprtnl_flag = 'A'
                    AND md.oprtnl_flag = 'A'
                    AND md.status_cid = 2
                    AND TRUNC (SYSDATE) BETWEEN md.from_date AND md.TO_DATE
                    AND prxm.mbr_sid = md.mbr_sid
                    AND ou.org_unit_sid = req.org_unit_sid
                    AND ou.oprtnl_flag = 'A'
                    AND req.pa_rqst_sid = prxpl.pa_rqst_sid
                    AND prxm.pa_rqst_sid = prxpl.pa_rqst_sid
                    AND pci.pa_rqst_sid = prxm.pa_rqst_sid
                    AND pci.pa_rqst_sid = wmdtl.subsystem_task_sid
                    AND pci.pa_rqst_sid = prxpl.pa_rqst_sid
                    AND prxpl.pa_prvdr_type_lkpcd = 'RR'
                    AND prxpl.oprtnl_flag = 'A'
                    AND req.status_cid = sts.status_cid
                    AND sts.status_type_cid = 3
                    AND sts.oprtnl_flag = 'A'
                    AND prxpl.prvdr_lctn_iid = pl.prvdr_lctn_iid
                    AND p.prvdr_sid = pd.prvdr_sid
                    AND p.prvdr_sid = pl.prvdr_sid
                    AND pd.oprtnl_flag = 'A'
                    AND pd.status_cid = 2
                    AND TRUNC (SYSDATE) BETWEEN pd.from_date AND pd.TO_DATE
                    AND wmdtl.subsystem_task_sid = req.pa_rqst_sid
                    AND wmdtl.subsystem_lkpcd = 'PA'
                    AND wmdtl.oprtnl_flag = 'A'
                    AND req.pa_rqst_date > (SYSDATE - 365)
                                   ORDER BY TO_DATE ("Request Date", 'MM/dd/yyyy hh24:mi:ss') DESC,
                        "Beneficiary Name" ASC) a
WHERE ROWNUM < 102;regards,
P Prakash
Edited by: BluShadow on 17-May-2011 15:01
added {noformat}{noformat} tags around the code

833560 wrote:
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .This is why smaller, simpler queries are easier to work with than huge ones - when something like this goes wrong smaller queries are much eaiser to debug. Unfortunately using smaller, easier-to-work with queries is not always an option
Ganesh is right - you will have to dissect the big query bit by bit until you find the offending subquery. If there is another way I would like to find out about it too.
The easiest way to do this is probably to use block comments to isolate parts of the query bit by bit until you find the offending part. If you carefully examine the subqueries you might be able to figure out which one is returning multiple rows without commenting everything
Good luck!

How to find out selected AssignedStory or Link?

Hello to all,
can anyone pls. explain how to find out which assigned story or link is selected at the time the script is fired.
My problem is this: I would like to place an image into selected rectangle which is exported into .icml. So, for example, you have few exported rectangles and you would like to place an image into the one which is selected (through link or assignment panel). Because you can not select a rectangle in InCopy like you can in InDesign I tried to take a look through assigned stories...
                   For aCounter As Integer = 1 To myDocument.Assignments.Count
                        Dim myAssignment As InCopy.Assignment = myDocument.Assignments.Item(aCounter)
                        For sCounter As Integer = 1 To myAssignment.AssignedStories.Count
                            Dim myAssignedStory As InCopy.AssignedStory = myAssignment.AssignedStories.Item(sCounter)
                            Dim myStoryRef As Object = myAssignedStory.StoryReference
                            find out if assigned story or story reference is selected
                            'Rectangle
                            If TypeName(myStoryRef) = "Rectangle" Then
                                Dim myObjectRectangle As InCopy.Rectangle = myStoryRef
                                If myObjectRectangle.Graphics.Count = 0 And myObjectRectangle.Images.Count = 0 Then
                                    'CheckOut if needed
                                    'Place Media
                                End If
                            End If
                        Next
                    Next
Kind regards,
Marko

Well,
I couldn't solve this without using a placeholder image. I found that you need to check if the selection is an image and than replace that image... So something like this below:
                'Check if there is a selected image for relink
                If myDocument.Selection.Count = 1 Then
                    If TypeName(myDocument.Selection.Item(1)) = "Image" Then
                        myImage = myDocument.Selection.Item(1)
                        myImageLink = myImage.ItemLink
                        Dim msgRet As MsgBoxResult = MsgBox("Would you like to relink selected image?", MsgBoxStyle.YesNoCancel, "Relink seleceted image?")
                        If msgRet = MsgBoxResult.Yes Then
                                    ' DO some action
                                    Dim MediaLink As String = something...
                                            'CheckOut action
                                            If myCheckOutMenu.AssociatedMenuAction.Enabled() Then
                                                myCheckOutMenu.AssociatedMenuAction.Invoke()
                                            End If
                                            myImageLink.Relink(fileLink)
                                            Try
                                                myImageLink.Update()
                                            Catch
                                            End Try
Hope this helps.
Regards,
Marko

Get "404 Not Found" after deployment. How to find out correct URL?

To the experienced:
In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
I then used this url to invoke the deployed application in a browser:
http://localhost:8888/ZB/faces/staff/login.jspx
But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
Many thanks for your help!
Newman

Hi, Arun,
Thank you for the suggestion. I tried it but got the same error.
I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
http://localhost:8888/ZB/faces/staff/login.jspx
And I got the same "404 Not Found" error.
There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
All ideas and suggestions are very much appreciated!
Newman

How to find out the locale setting in a browser?

In my Java web project, the multi-lingual issue on the JSP pages is handled by JSTL. It works fine so far for any input messages. However, some messages come from the container. It is needed to find out the browser's country and language settings inside of the container. My question is how to find out the settings?
Thanks in advance.
v.

Hi, this I found on James' website--see http://www.rf.net/~james/perli18n.html#Q28
Q28. Can web servers automatically detect the language of the browser and display the correct localized page?
A28. Yes. HTTP/1.1 defines the details of how content negotiation works, including language content.
WWW browsers send an Accept-Language request header specifying which languages are preferred for responses. This technique works fairly well, although some versions of Netscape Navigator send an improperly formatted request parameter. Also, switching language preferences in either Navigator or IE 4 doesn't always "take" without first deleting a language hint.
Few sites do content-negotiation on language, and interestingly enough I do not know of any major portals doing this. One site that does is Sun's documentation library at SunDocs. Debian.org does a very nice job of using Apache content negotiation wih languages and also has some nice help info too on Setting the Default Language.
Apache's Content Negotiation features will select the right page to return, whether HTML or image file. Annoyingly, the match logic is very literal, so a browser request for en-us will not match a server entry of en except as a last resort. Any other exact match will win over en, even if en-us was first preference.
There are 2 ways of doing content negotiation with Apache: type or variant maps and multiviews.
Variant Maps
In httpd.conf, disable Options Multiviews if configured and add
AddType type-var var
DirectoryIndex index.var
Then create an index.var file like this:
URI: start; vary="type,language"
URI: index.html.en
Content-type: text/html
Content-language: en-GB
URI: index.html.en
Content-type: text/html
Content-language: en-US
URI: index.html.en
Content-type: text/html
Content-language: en
URI: index.html.fr
Content-type: text/html
Content-language: fr-CA
URI: index.html.fr
Content-type: text/html
Content-language: fr
URI: index.html.es
Content-type: text/html
Content-language: es
Multiviews
The multiviews technique works like this. This does add extra server load, as each content directory must be scanned for the variant document names.
index.html is localized into variant documents such as:
index.html.en (or index.en.html)
index.html.fr
index.html.es
index.html (or index.html.html as a reader has recommended) symlinked to one of the above as the last resort.
Here's an example of http.conf directives for this:
# in httpd.conf
AddLanguage en .en
AddLanguage fr .fr
AddLanguage es .es
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
LanguagePriority en es fr de pt
Options Multiviews
# end of httpd.conf fragment
Starting in Apache 1.2, you may also create documents with multiple language extensions.
O'Reilly's Apache - The Definitive Guide, Chapter 6
ApacheWeek article on Language Negotiation
Another ApacheWeek article on Language Negotiation

How to find out the tablename and column name

Hi,
I have inserted a value (say 'I am here') in a table. but i don't know which is getting inserted this value.
Now i want to know which table and colums has this value (I am here). How to find out as without knowing the table name.
Is there any option to get the tablename and colum??.
Please help me.
thanks.

Does nobody document their code anymore?
See my response Re: How to find out a tablename for one possible solution.
HTH
John

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

How to find out the particular form available language?

hi ,
how to find out the particular form available language?
pls could u clirify the dought.
regards
eswar

I guess you wrongly closed the thread without any answer.
utilities --> version, it will give all the list of languages of SAPScript.
Or goto SE71,
Press F4, in place of form name and goto unclassified forms, you will see all form names with available languages.
Regards,
Sairam

How to find out the primary and failover DNS name

Hi;
This sounds very stupid, but could some one please tell me how to find out the name/dns name of the primary and failover server without using the CDS console.
any help is appreciated

Is this what you want?
$ /usr/lib/ldap/ldap_cachemgr -g
cachemgr configuration:
server debug level 0
server log file "/var/ldap/cachemgr.log"
number of calls to ldapcachemgr 12729
cachemgr cache data statistics:
Configuration refresh information:
Previous refresh time: 2005/08/07 23:54:59
Next refresh time: 2005/08/08 00:55:00
Server information:
Previous refresh time: 2005/08/14 15:15:00
Next refresh time: 2005/08/15 03:15:00
server: ldap1.example.com, status: UP
server: ldap2.example.com, status: UP
server: ldap3.example.com, status: UP
Cache data information:
Maximum cache entries: 256
Number of cache entries: 0
Gary

How to find out what is the lock key for the computer

How to find out what is the lock key for the computer?

You don't.
If you forgot or lost the password, all you can practically do is reset it.
The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
On Lion, you use the following technique to reset the Administrators password:
Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

How to find out MIGO or MIRO without FI document

Similar Messages

Maybe you are looking for