How to find out SAP J2EE Patch Level for 04s
Hi all
I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the PatchLevel for WAS 7.0 , J2SE used is 1.4.2_09
Thanks in Advance !!
Asif
Thanks Kenny ,
But as you can see from version.txt file for Server0 it does not mention PatchLevel it is
blank
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
i also checked version.txt for dispatcher it is as below
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
servers it is mentioned
so can u give some inference based on above descriptions about What should be SAP J2EE Patch
Level for the 2004s servers
Regards !!
Asif
Similar Messages
-
How to find out the Idoc number triggered for any material transfer frm SAP
Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish -
How to find out relevant Infosources and Infocubes for Datasources (LO)
Hi Gems,
I am new to BW.
How to find out relevant Infosources and Infocubes for Datasources for LO Cockpit
any help site pls.
Thanks in advance1. make sure that your datasources have activated (trans RSA5 in SAP Source System) from the SAP Source system (Ex: R/3 or SCM System)
2. after that you have to run trans RSA9 in SAP Source System to transfer new datasource in to BI System.
3. log-on into BI System, run trans RSA1, choose SourceSystem Tab in the left panel. Right click on to your SAP Source System then choose <b>Replicate</b>.
4. in the left panel choose BI Content tab, select infoObjects by infoArea.
5. then Click on Grouping, select in <b>Dataflow Before and afterward</b>. Click Collection Mode, select Collect Automatically.
6.in the middle panel, expand "Supply Chain Management" infoArea, select both <b>Characteristics: Logistics General</b> and <b>Key Figures: Logistics General</b>. Right click on it and select <b>Insert Objects for Collections</b>.
7. After the objects have been inserted into Collected Objects then choose install with option Install in Background.
8. Wait for the result.
<b>Pls give point if you see its helpful.</b>
Regards,
Chuong Hoang -
How to find out the Number range object for Incident number
How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanyaHI, an example.
data: vl_num type i,
vl_char(6) type c,
vl_qty type INRI-QUANTITY,
vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
NR_RANGE_NR = '01'
OBJECT = 'ZRG0000001'
QUANTITY = '1'
SUBOBJECT = ' '
TOYEAR = '0000'
IGNORE_BUFFER = ' '
IMPORTING
NUMBER = vl_num
QUANTITY = vl_qty
RETURNCODE = vl_rc
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
BUFFER_OVERFLOW = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard -
How to find out the last time login for a locked login account?
In ASE 15.4,there are many login account show as locked and unlocked. How to find out the last login time for those locked login account?
Thank you. The version of my ASE is 12.5.4.
This is what I got from select * from syslogins:
suid status accdate totcpu totio spacelimit timelimit resultlimit dbname name password language pwdate audflags fullname srvname logincount procid
1
30 2 10/25/2012 11:41:10.430 AM 0 0 0 0 0 . . ... us_english 02/24/2.0.08 12:55:38.640 PM 0 [NULL] [NULL] [NULL] [NULL]
this is what I got from exec sp_displaylogin 'mylogin':
1 Suid: 46
2 Loginame: mylogin
3 Fullname: FN LN
4 Default Database: mydb
5 Default Language: us_english
6 Auto Login Script:
7 Configured Authorization:
8 Locked: YES
9 Date of Last Password Change: Apr 17 2010 2:36PM
10 Password expiration interval: 0
11 Password expired: NO
12 Minimum password length: 6
13 Maximum failed logins: 0
14 Current failed login attempts:
15 Authenticate with: AUTH_DEFAULT
which one is for last login time? -
how to find out my four number password for iphone4, how to find out my four number password for iphone4
There is no way to find out your four number password for your iPhone. If there were there would be no point in having a passcode. You can reset the phone as described here: http://support.apple.com/kb/HT1212.
There is no way to find out your four number password for your iPhone. If there were there would be no point in having a passcode. You can reset the phone as described here: http://support.apple.com/kb/HT1212. -
How to find out the idoc type required for our requirement
Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
PrasannaHi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A -
How to find out the standard info stucture for a customized IS in LIS
Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
SaddyHi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy -
How to find out CPU and memory usage for an instance?
Hi DBA Gurus,
How to find out CPU usage and memory usage for an instance?
Any information is appreciated!
Thank you!
Robertyou can calculate cpu usage by adding fallowing three factors which you can get from v$sysstat
1. Parse CPU time : This represents the percentage of CPU time spent parsing SQL statements. Parse time CPU can be a strong indication that an application has not been well tuned. High parse time CPU usually indicates that the application may be spending too much time opening and closing cursors or is not using bind variables.
2. Recursive CPU time : Sometimes, to execute a SQL statement issued by a user, the Oracle Server must issue additional statements. Such statements are called recursive calls or recursive SQL statements. For example, if you insert a row into a table that does not have enough space to hold that row, the Oracle Server makes recursive calls to allocate the space dynamically if dictionary managed tablespaces are being used.
Recursive calls are also generated due to the inavailability of dictionary info in the dictionary cache, firing of database triggers, execution of DDL, execution of SQL within PL/SQL blocks, functions or stored procedures and enforcement of referential integrity constraints
3. Other CPU time : This represents the percentage of time spent looking for buffers, fetching rows or index keys, etc. Generally, \"Other\" CPU should represent the highest percentage of CPU time out of the total CPU time used.
total memory used you can calculate adding
total_agrigate_area+sga
memory usage on os level you can know by fallowing commands
vmstat 5 20 depending upon os -
How to find out the SET PARAMETER ID for FB02 transaction
hi masters,
i m working on a alv report and in that i have to make a BELNR field as a interactive field. i m using the 'user command' for this.
FORM user_command USING ucomm TYPE sy-ucomm
selfield TYPE slis_selfield.
IF selfield-value IS NOT INITIAL.
CASE selfield-fieldname.
WHEN 'BELNR'.
SET PARAMETER ID 'FBAS' FIELD selfield-value.
CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
WHEN OTHERS.
MESSAGE text-000 TYPE 'W'.
ENDCASE.
ENDIF.
ENDFORM. "user_command
i used this code using this. using this code my program goes to FB03 tc but it don't shows the data of BELNR what i was clicked. it always shows first BELNR no. in the table. plz anyone help me for this..
the SET PARAMETER ID 'FBAS' i m using is right? if not plz suggest me how to find out correct one?Hi Vicky,
To know the Parameter Id of any field in a transaction ,
you just press F1 onthe particular field then in technical settings under Field data
you can see the PARMATER ID.
So if you check like this you can see 'BLN' as parameter id for Document number in FB03
transaction
Regards,
Manoj Kumar P -
In DBI , how to find out the Source Query used for the Report
Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj ShrivastavaHi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu -
How to find out back end mapping program for Idoc ?
HI Experts,
Iam new to ALE IIDOCS .. i have a issue in existing idoc .
Some data maping problem is there in the existing idocs
I need to find out back end program for this perticular idoc no .
Exactly where they have written the maping code .
How to find out this ?
is there any preceedure to trace the back end program based on the idoc number .
Regards
RameshGHi Ramesh,
If you are looking at Inbound que then we generally double click on idoc go to control datat info and then take partner data info there
Goto we20 check teh system and there double click the message type and there in inbound option double clik the porcess code it gives you one FM where you can see logic written to process that IDOC
Regards,
Poornima -
How to find out object / schema / database level replication is active
Hi,
I am an experienced DBA but new to streams and I am asked to support an existing streams configuration between two Oracle 10g databases. I was told it is bi-directional but one database is standby and it never took traffic. My questions are
1. How will I find out whether it is a database or schema level replication? Any queries that I can run to find it out?
2. How do I find out it is bi-directional and it iis current. What queries I can run to confirm?
3. How will I find out the excluded objects? Any queries please...
Thanks for the help
Regards
Ramahttp://www.morganslibrary.org/reference/dyn_perf_view.html#dyst
SELECT name FROM dba_dependencies
WHERE referenced_name = 'DBMS_STREAMS_ADM' AND name LIKE 'DBA%'
UNION
SELECT referenced_name FROM dba_dependencies
WHERE name = 'DBMS_STREAMS_ADM' AND referenced_name LIKE 'DBA%'; -
How to find out version of patch for iPlanet Web Server 6.1 on Win2000
I have a iPlanet Web Server 6.1 SP1 running on Windows 2000. Can I find out what patches has been installed for my iPlanet Web Server?
Thanks in advance for any information.n/m, read version, not patches.
Edited by: David.Eriksson on Jun 30, 2008 8:12 AM -
How to find what is the patch no for my BI java ?
Note 1330884 recommends to apply the BI Java patch Support Package 18 Patch 50 for SAP NetWeaver 7.0 BI Java to your BI system.
Two questions
1) I want to know how to find the patch no for my installation ?
2) where is the information for bi java ? Below is the component info from my BI system. I dont see any BI JAVA component here ?
thank you.
I got the below from : http://<system>:<port>/monitoring/ComponentInfo
Software Components
Vendor Name Version Provider Location Applied
sap.com ADSSAP 7.00 SP18 (1000.7.00.18.0.20081123153837) SAP AG SAP AG 20090515173903
sap.com BASETABLES 7.00 SP18 (1000.7.00.18.0.20081123154558) SAP AG SAP AG 20090515171425
sap.com BI-BASE-S 7.00 SP18 (1000.7.00.18.12.20090129073318) SAP AG SAP AG 20090518112357
sap.com BI-IBC 7.00 SP18 (1000.7.00.18.0.20081124051700) SAP AG SAP AG 20090515180641
sap.com BI-REPPLAN 7.00 SP18 (1000.7.00.18.0.20081125103147) SAP AG MAIN_APL70P18_C 20090515180729
sap.com BI-WDALV 7.00 SP18 (1000.7.00.18.0.20081125103146) SAP AG MAIN_APL70P18_C 20090515180651
sap.com BI_MMR 7.00 SP18 (1000.7.00.18.0.20081123154631) SAP AG SAP AG 20090515173946
sap.com BI_UDI 7.00 SP18 (1000.7.00.18.0.20081123154646) SAP AG SAP AG 20090515174042
sap.com BIWEBAPP 7.00 SP18 (1000.7.00.18.12.20090129073354) SAP AG SAP AG 20090518112351
sap.com BP_BIADMIN 60.1 SP5 (1000.60.1.5.0.20060118134900) SAP AG SAP AG 20090720155956
sap.com CAF 7.00 SP18 (1000.7.00.18.0.20081125143229) SAP AG MAIN_APL70P18_C 20090515174948
sap.com CAF-KM 7.00 SP18 (1000.7.00.18.0.20081125132429) SAP AG MAIN_APL70P18_C 20090515181229
sap.com CAF-UM 7.00 SP18 (1000.7.00.18.0.20081125143246) SAP AG MAIN_APL70P18_C 20090515174049
sap.com CORE-TOOLS 7.00 SP18 (1000.7.00.18.0.20081123154839) SAP AG SAP AG 20090515171444
sap.com EP-PSERV 7.00 SP18 (1000.7.00.18.0.20081217162400) SAP AG SAP AG 20090515180804
sap.com EP-WDC 7.00 SP18 (1000.7.00.18.0.20081113110900) SAP AG SAP AG 20090515180833
sap.com EPBC 7.00 SP18 (1000.7.00.18.0.20081123205100) SAP AG SAP AG 20090515174158
sap.com EPBC2 7.00 SP18 (1000.7.00.18.0.20081123205100) SAP AG SAP AG 20090515180835
sap.com JLOGVIEW 7.00 SP18 (1000.7.00.18.0.20081123152100) SAP AG SAP AG 20090515171508
sap.com JSPM 7.00 SP18 (1000.7.00.18.0.20081123152100) SAP AG SAP AG 20090515110509
sap.com KM-KW_JIKS 7.00 SP18 (1000.7.00.18.0.20081123155108) SAP AG SAP AG 20090515174202
sap.com KMC-BC 7.00 SP18 (1000.7.00.18.0.20081124023400) SAP AG SAP AG 20090515180855
sap.com KMC-CM 7.00 SP18 (1000.7.00.18.0.20081124045000) SAP AG SAP AG 20090515180911
sap.com KMC-COLL 7.00 SP18 (1000.7.00.18.0.20081124050800) SAP AG SAP AG 20090515180926
sap.com LM-PORTAL 7.00 SP18 (1000.7.00.18.0.20081125133231) SAP AG MAIN_APL70P18_C 20090515180928
sap.com LM-TOOLS 7.00 SP18 (1000.7.00.18.0.20081218100553) SAP AG MAIN_APL70P18_C 20090515175236
sap.com NET-PDK 7.00 SP18 (1000.7.00.18.0.20081124003300) SAP AG SAP AG 20090515180432
sap.com RTC 7.00 SP18 (1000.7.00.18.0.20081124050800) SAP AG SAP AG 20090515180434
sap.com RTC-STREAM 7.00 SP18 (1000.7.00.18.0.20081124050800) SAP AG SAP AG 20090515180930
sap.com SAP-EU 7.00 SP18 (1000.7.00.18.0.20081125133807) SAP AG MAIN_APL70P18_C 20090515181146
sap.com SAP-JEE 7.00 SP18 (1000.7.00.18.0.20081123155510) SAP AG SAP AG 20090515171540
sap.com SAP-JEECOR 7.00 SP18 (1000.7.00.18.1.20090120111509) SAP AG SAP AG 20090518112033
sap.com SAP_JTECHF 7.00 SP18 (1000.7.00.18.1.20090120111547) SAP AG SAP AG 20090518112036
sap.com SAP_JTECHS 7.00 SP18 (1000.7.00.18.1.20090120111716) SAP AG SAP AG 20090518112429
sap.com UMEADMIN 7.00 SP18 (1000.7.00.18.0.20081125103148) SAP AG MAIN_APL70P18_C 20090515175248
sap.com UWLJWF 7.00 SP18 (1000.7.00.18.0.20081124030000) SAP AG SAP AG 20090515180944
sap.com VCBASE 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181246
sap.com VCFLEX 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181231
sap.com VCFRAMEWORK 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181234
sap.com VCKITBI 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181248
sap.com VCKITGP 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181250
sap.com VCKITXX 7.00 SP18 (1000.7.00.18.0.20081124020700) SAP AG SAP AG 20090515181252
sap.com WDEXTENSIONS 7.00 SP18 (1000.7.00.18.0.20081125134217) SAP AG MAIN_APL70P18_C 20090515181322Manoj,
Thank you. I can see in jspm (release.splevel.PATCHlevel). But which component is the BI JAVA ? I done see any component by that name in jspm !!!
I can see a sap.com/SAP_JAVASL. Is this the one ?
Anil , Royi,
I know I am on netweaver 7 and sp 18. I want to know PATCH NO. Pasted above is the component info. Where is the java PATCH information ?
Does ADSSAP 7.00 SP18 (1000.7.00.18.0.20081123153837 mean
release 7
sp 18
patch 0
thank you.
Maybe you are looking for
-
Link to javadoc doc folder in your webpage
Hi all, I'm new to iWeb. I have a folder named "doc" filled with html pages that has been produced as an API for my project through Eclipse. My question , I created a new site and I want to add a hyperlink to this folder to show the project API. Th
-
Next Meet-the-expert session: Composition tools in practice
Composition Experts,<br> If you'd like to learn how BearingPoint Inc. uses the SAP Composition tools in their BAMS (Business Acquisition Management Solution) project, invest one hour and take part in the next Meet-the-expert session on Apr 11th, 5 -
-
I'm trying to use the SAVE EXCEPTION clause and load all the records that error into an error table. example of my code is below. This code does not compile, it does not like the way I refrence a column in the collection ie. recs.sku(SQL%BULK_EXCEPTI
-
How to create Maintaince View and Help View
Hi, Can u pls tell me the step by step procedure for how to create Maintaince View and Help View. And what's the use of these view's. Regards, Kumar
-
My new Nano has no Fitness "steps" program.
How can I get the software for the "steps" portion of the Fitness program?