How to find out sender query by using receiver query in RRI

Hi,
I have do some assignment settings .I know receiver query name ,but i don't know sender query name .
please suggest me how to find out sender query name .
is there any table /t-code ?
Thanks,
EDK.....

Hello,
If the receiver query is web report, then goto table RSBBSQUERY and in RONAM field put the web report name.
You will get the sender query UID in the field ELTUID.
Now take this UID and goto table RSRREPDIR and put this UID in COMPUID and you will get the query name.
If the reciever query is bex query then get the UUID as above from RSRREPDIR by providin the tech name and then go to table RSBBSQUERY to get the UID of the sender query.
Regards
Shashank

Similar Messages

How to find out Mapping Loading type using db query

Is there a way to find out mapping loading type using a database query.
Is there a table in database which stores loading type information?
Thanks,
Niranjan

hi,
i found the below
select
        comp.map_name
       ,comp.map_component_id             comp_map_component_id
       ,comp.operator_type                comp_operator_type
       ,comp.data_entity_id               comp_data_entity
       ,comp.data_entity_name             comp_data_ename
       ,comp.data_entity_type             comp_data_etype
       ,param.map_component_name          param_comp_name
       ,param.parameter_id                param_par_id
       ,param.parameter_name              param_par_name
       ,param.parameter_group_name        param_par_gr_name
       ,param.parameter_type              param_par_type
       ,param.position                    param_position
       ,param.data_type                   param_data_type
       ,param.transformation_expression   param_transform
       ,param.data_item_id                param_data_item_id
       ,param.data_item_name              param_data_item_name
       ,param.source_parameter_name       param_src_parameter
       ,nvl2(param.source_parameter_name,'TARGET','SOURCE') param_INFO
       ,param.map_component_id             param_map_component_id
       ,md.map_component_id                md_map_component_id
       ,md.map_component_name              md_map_component_name
       ,md.parameter_name                  md_parameter_name
       ,md.parameter_id                    md_parameter_id
       ,md.position                        md_position
       ,md.transformation_expression       md_transformation
       ,md.description                     md_description
       ,md.source_expression               md_source_expression
       ,mp.MAP_COMPONENT_ID                    mp_map_component_id
       ,mp.MAP_COMPONENT_NAME                  mp_map_component_name
       ,mp.PROPERTY_ID                        mp_property_id
       ,mp.PROPERTY_NAME                      mp_property_name
       ,mp.PROPERTY_GROUP_NAME                mp_property_group_name
       ,mp.BUSINESS_NAME                      mp_business_name
       ,mp.PROPERTY_VALUE                  mp_property_value
       ,mp.DESCRIPTION                     mp_description
from all_iv_xform_map_components comp,
     all_iv_xform_map_parameters param,
     ALL_IV_XFORM_MAP_DETAILS md,
     ALL_IV_XFORM_MAP_PROPERTIES mp
where mp.business_name                  = 'DATAENTITY.PARMETERS.LOADTYPE'
and param.map_component_id           = comp.map_component_id
and param.map_component_id           = md.map_component_id(+)
and param.parameter_id               = md.parameter_id (+)
and md.map_component_id              = mp.map_component_id (+)i think it contains what we require;
can you check on your side?
rgds

How to find out who has deleted the production Query

Hi All,
I have searche SD , i can find it for infoobject deletion but i couldn't find it for Query.
Please let me know is there any possiblity to kow
How to find out who has deleted the production Query
Awaiting for your replies.
cheers

Hi Mahesh and all,
Thanks for all your inputs.
I have tried with RSRREPDIR tabel , I am unable to see that query at all.
If I use theT-code SLG1,
please guide me on the steps with paramets to be given in the respective ..object, subobject etc..
OR
could you please suggest any other way.
cheers
leena

How to find out which keywords were used to create a smart album?

Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>

b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown.

How to find out names of reports using a particular view

hi guys,
i am newbie here, i jsut want to know how to find out which reports are using a particular view
many thanks in advance for your help

If you go to the Properties for the Folder in Discoverer Administrator, there is a Dependents tab that should list any workbooks using the folder. This only works for workbooks saved to the database, so won't help with any created using Discoverer Desktop. If you are gathering statistics and have the The Discoverer V5 EUL business area and its workbooks installed, it can tell you about Folders Used as well. It contains information about queries run whether the workbook is saved to the database or to the file system, but wouldn't contain inforamation about workbooks that had been created but not run.

How to find out if I am using a 32 bits or 64 bits version of JRE?

How to find out if I am using a 32 bits or 64 bits version of JRE?
If I have 2 instances of Java installed in 2 seperate directories, one 32 bits and other 64 bits on Linux. How do I identify which directory holds which version?
Is there any command that can output this info?
Regards,
Billamama

With a Sun JDK or JRE, you can use java -version:
$ java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) Server VM (build 1.6.0-b105, mixed mode)
... switch to the 64-bit JDK ...
$ java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0-b105, mixed mode)
The last line says "64-Bit."

How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.

You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level.

How to find out internet explorer version ,using a java program?

How to find out internet explorer version ,using a java program?

Browser version from java?....you must be referring it from some web application....rite?
You can read the User-Agent header using request.getUserAgent() or request.getHeader("User-Agent") in your jsp or servlet.
for more details pls refer:
http://www.jguru.com/jguru/faq/view.jsp?EID=12253

How to find out which lists are using email enabled feature in my SP 2010? Any script? Anything else?

Hi there,
How to find out which lists are email enabled in my SP 2010?
Any script? Anything else?
Thank you.

Hi frob,
check this script that is stated on this link
$SPwebApp = Get-SPWebApplication "http://migration.Company.com"
<# If it is MOSS 2007, You can use:
$SPWebApp = [Microsoft.SharePoint.Administration.SPWebApplication]::Lookup(http://sharepoint.com)
To get SPWebApplication Object
#>
#create a CSV file
"E-Mail,List,Site" > "EMail-Enabled.txt" #Write the Headers in to a text file
foreach ($SPsite in $SPwebApp.Sites) # get the collection of site collections
foreach($SPweb in $SPsite.AllWebs) # get the collection of sub sites
foreach ($SPList list in $SPweb.Lists)
if ( ($splist.CanReceiveEmail) -and ($SPlist.EmailAlias) )
# WRITE-HOST "E-Mail -" $SPList.EmailAlias "is configured for the list "$SPlist.Title "in "$SPweb.Url
$SPList.EmailAlias + "," + $SPlist.Title +"," + $SPweb.Url >> EMail-Enabled.txt #append the data
http://www.sharepointdiary.com/2011/06/find-all-incoming-email-enabled-lists.html
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation. Please remember to mark the reply as answer if it helps.

How to find out which BADIs are used

Hi Experts,
Is there any tcode where I can give the transaction or program name and find out which BADIs are used in that transaction.
thanks
sankar

Dear Sankar,
You can first check available BAdis and then go to SE19 to see what all have been implemented.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Hope this will help.
Regards,
Naveen.

How to find out wich application is used

Hi,
I would like to know is it possible to find out which application is used at the moment for example SD,MM,FI,CO ?
Regards,
Stefan

find out which application is used at the moment ?
Use these transactions.
SM04 - Currently active users running which transaction.
SM50 - work process running for that transactions

How to find out which connection is used for access to Bex query?

Hello,
in our BO 4.0 environment we have a lot of different connections to Bex queries.
There exist more connections to one Bex query.
For example to Bexquery1 we can access with 2 connections, connection : BX1 (connection specific for one query) and connection DEVcubes(generic connection to all cubes)
How can I check in Webi report over Bex query which connection is currently used?
Thanks a lot !
Rudolf

Hi Rudolf,
Your requirement can be achieved using QueryBuilder.
Please refer to following QueryBuilder step-by-step post by Manikandan:
http://scn.sap.com/community/bi-platform/blog/2012/10/11/businessobjects-query-builder-queries
In bove post, Go to Universe Queries section -> All webi report using one connection
In case you dont know how to use QueryBuilder, please refer to following post:
http://scn.sap.com/docs/DOC-42952
Please let us know if you get any doubt.

How to find out if ENQUEUE_ESRDIRE is used inside a standard program!

Hi All,
I have run VFX3 to rellease billing document using VF02 BDC that is called inside VFX3.
I used debugging to find out in ENQUEUE_ESRDIRE, or ENQUEUE_E_TRDIR is used anywhere in the process.
I also used System Debugging and Break-point at statement functions. But I have not ben stopped at these function modules.
However, I checked using ST05 with enqueue trace enabled, and I found the below entries.
255 ESRDIRE    ENQUEUE     1      0 Excl(***) TRDIR GP3VOFY4EM1BE5DHB1155DUU8H
37 ESRDIRE    DEQUEUE     1      0 Excl(***) TRDIR GP3VOFY4EM1BE5DHB1155DUU8H
My query is how can we debug to a point where these lock objects are used or Do these lock objects are not identified in debug mode but are logged while enqueue trace used i.e., SAP uses internally?
Please help me as this helps me in resolving an issue where locking issue is there that fails to update VFX3 becuase for one user
in SQL trace it is logged as VF02 TRDIR Lock > 6 hours VF02 TRDIR
and for another job "UPD 42 050 BATCHFIN          GZZ K > Obj: ESRDIRE # enxxhead7727" is logged in ST05.
Regards,
Pratyusha

Hi Clemens,
I was unable to trigger the exact point from where this lock object has triggered.
But I am sure that it is a standard SAP process which is locking while releasing the billing documents.
Now my query is why SAP why SAP'S standard program VF02 that is internally called by VFX3 (RVFAKSPE) and that can be submitted in background mode will use ESRDIRE lock whil each time it releases the block?
The problem I am facing is - there are different BATCH jobs and all are for VFX3 with different variant so that no billing document is processed by two different jobs at same time. However the lock entries ENQUEUE_ESRDIRE is creating problem as it is creating locking issue and hence the jobs are processed longer than expected. This is evident from ENQUEUE trace of ST05.
Is VFX3 ( In version 4.5B) is meant for running 1 background job of VFX3 at a time?
Regards,
Pratyusha

How to find out jre version installed ,using a java program?

Hello,
Is there any way to find out the installed JRE version using a java program ?
The requirement is as follows:
There is a html page with 4 steps to install a software. each step is a link, which upon clicking does its work.
the first step is to install jre 1.4.2_11 if its not installed in the system. But how can i find out whether jre 1.4.2_11 is installed or not ?
Thanks in advance

For the hell of it... here is a list of properties you can query:
java.version Java Runtime Environment version
java.vendor Java Runtime Environment vendor
java.vendor.url Java vendor URL
java.home Java installation directory
java.vm.specification.version Java Virtual Machine specification version
java.vm.specification.vendor Java Virtual Machine specification vendor
java.vm.specification.name Java Virtual Machine specification name
java.vm.version Java Virtual Machine implementation version
java.vm.vendor Java Virtual Machine implementation vendor
java.vm.name Java Virtual Machine implementation name
java.specification.version Java Runtime Environment specification version
java.specification.vendor Java Runtime Environment specification vendor
java.specification.name Java Runtime Environment specification name
java.class.version Java class format version number
java.class.path Java class path
java.library.path List of paths to search when loading libraries
java.io.tmpdir Default temp file path
java.compiler Name of JIT compiler to use
java.ext.dirs Path of extension directory or directories
os.name Operating system name
os.arch Operating system architecture
os.version Operating system version
file.separator File separator ("/" on UNIX)
path.separator Path separator (":" on UNIX)
line.separator Line separator ("\n" on UNIX)
user.name User's account name
user.home User's home directory
user.dir User's current working directory

How to find out null sorting method used?

(Reposting the question, originally posted on java.sun.com forum)
I am trying to find out how the nulls are sorted in the current resultset. I would like to find out without really assuming about the database used. So, I thought the following methods in java.sql.DatabaseMetadata should help, but the results I am seeing is opposite of what these calls say, can anyone throw more light on this?
I am using JDK 1.3 and driver from Oracle and from WebLogic (for MS-SQL)
Oracle (null is placed at the end in resultset)
nullsAreSortedHigh() :false
nullsAreSortedLow() :true
nullsAreSortedAtEnd() :false
nullsAreSortedAtStart() :false
MSSQL (null is placed at the beginning in resultset)
nullsAreSortedHigh() :true
nullsAreSortedLow() :false
nullsAreSortedAtEnd() :false
nullsAreSortedAtStart() :false
From JDK 1.4's documentation, it says if nullsAreSortedHigh, null > (anything), so nulls should be at the end in an ascending order, which is completely opposite of the results coming from MS-SQL and Oracle (which puts the Nulls at the end but returns true for nullsAreSortedLow)
Any help appreciated.
Thanks.

Hi
Use t code MC45.
key in the from to material in the list. Give the plant..
The result will be the usage percentages..
the mateials with 0% are unused but existing in the plant..
Regards
Anjali

How to find out sender query by using receiver query in RRI

Similar Messages

Maybe you are looking for