How to find out Shopping Cart created in backend system or ECC system
Hi All,
I am new to SAP SRM7.0. The Client has implemented "Extended Classic Scenario". i.e. SC>Approval>PO>Confirmation>Invoice process in ECC.
We created few SC with "Free text" i.e. Describe what you need option in SC.
The SC is created with 4 digit number 2690. Also, the Status " Approved". since its low value.say 5 GBP.
I have like 25 to 30 SC created like this: I need to know the following:-
1. When i open SC and look for Related document, i see only SC number , but no Follow on document. not sure why ?
2. How can i know the list of SC in backend system. i.e like ECC of the SRM backend system. Please let me know the table name it get stored.. I searched EBAN and found only those which has PO is stored.
also can you please advise if by creating the SC in SRM.. will get replicated in ECC system ?. or only if Follow on doc gets created it will get replicated in ECC system?.
Thx
MJ
Hi,
SC is never replicated to backend.
Extended scenario document flow is SC -> SRM PO(Main) -> ERP PO(Copy).
Please go to BBP_PD transaction and navigate to SC item detail. You see what is the follow-on document.
Regards,
Masa
Similar Messages
-
How to find out Shopping cart no after creation PO from PDP
HI all,
Classic PDP Scenerio:
PR is transfered to SRM system and from thier i drafted the PO (Classic scenerio). However, once PO is created in the Backend system , how findout the related documents information (PO or SC) which is created from PR?
Thanks
HarishHi Harish,
Have a look at the following thread:
Re: Get the tracking number ( SC no) using PO in SRM
Hope this helps.
Thanks,
Pradeep -
How to find out which user create folder
how to find out which user create folder in shared drive?
Hello,
you have to enable Auditing in on the DCs OU and also on the top folder level where this should be monitored.
http://technet.microsoft.com/en-us/library/cc784387(v=ws.10).aspx
http://support.microsoft.com/kb/310399
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights. -
How to find out the packages created by a particular user.
Hi,
In a system which i am working.
I want the find the different packages that wer created by me.
How to find it out.
Regards,
ChandruHi Chandra
Goto SE21
Package Z* then Press F4.
Person Responsible: Your Login Name
OKAY . This will list all packages made by u.
Reward Points if useful
Regards
Akshay Chonkar -
How to find out number of background work processe available in the system?
Hi All,
I have a FM that triggers a background job using JOB_OPEN, ABAP_SUBMIT and JOB_CLOSE. But the problem is if there are no background work processes available at that moment, it does not return error. Not sure whether the job is even scheduled!
Is there a way to find out if there are any background work processes available in the system? I know a FM SPBT_INITIALIZE which gives info about dialog work processes. Is there any other FM similar to this which gives info about background wp??
Regards,
Shaileshyour Job will remain in a queue by message handler. once workprocess is free, your job gets scheduled
by the way, you can use the functionality used in FM TH_DISPLAY_WORKPROCESS_LIST to read the workprocesses
the command which gets you the workprocess is:
CALL 'ThWpInfo' ID 'OPCODE' FIELD OPCODE_WP_LIST
ID 'TAB' FIELD LIST_STATE_WPLST-TABL
ID 'CPU' FIELD LIST_STATE_WPLST-CPU.
check how its written in include LSDEBF01, form SET_LIST_WPLST
Edited by: Soumyaprakash Mishra on Dec 12, 2011 12:17 PM -
How to find out the requsition created in the OLTP from ASCP
I have released a planned order from the ASCP, The requsition import and the create releases requests were completed in the OLTP but then i am not able to see that requsition either or if some body can help me out with navigation
Where are you not able to see the req?
Are you using screen or using sql?
If you are using EBS screens,
Go to req. summary screen > enter import source =MSC and enter the item # and Date Range > hit find
Similarly go to PO summary screen > enter item# and date range, check "View releases" box > hit find
If you are on sql, use po_requisition_headers_all and po_line_locations_all tables.
Hope this helps,
Sandeep Gandhi -
How to find out a list of modified objects in an SAP system
Hi all, not sure if this is the right place to ask.
In preparation for an upcoming upgrade of a SAP 4.6c system, I have been asked to generate a list of SAP objects that have been modified over the years.
Is there a table or a report that I can use to find this out? Thanks!Hi,
Please check the table TADIR. From that table u can get the modified object details.
thanks,
Senthil Kumar.C -
BAPI_SCEC_CREATE - how to get the shopping cart to go to our workflow
Dear experts,
When a shopping cart is created using BAPI_SCEC_CREATE, it will get approved automatically. We want the shopping cart to go through our approval workflow. Is there any way to achieve this? I saw threads on similar question but there's no solution. It seems to be related to Sourcing relevant indicator (SOURCE_REL_IND) in table BBP_PDIGP. I've tried executing BAPI_SCEC_CREATE followed by BAPI_TRANSACTION_COMMIT and then BBP_PDIGP_DB_DIRECT_UPDATE to reset the SOURCE_REL_IND. However, it didn't work.
Does anyone know how to get the shopping cart created by BAPI_SCEC_CREATE to go to a workflow?
Thanks,
LaraHello Lara,
When a shopping cart is created using BAPI_SCEC_CREATE, it will get approved automatically. We want the shopping cart to go through our approval workflow. Is there any way to achieve this?
Have a look at SRM article below:
[Enable SRM Workflow for External Purchase Requisitions|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/5082a622-7310-2c10-1a9b-ef31dd69a770]
It seems to be related to Sourcing relevant indicator (SOURCE_REL_IND) in table BBP_PDIGP.
Check your customizing:
(in SRM 7.0) SAP Supplier Relationship Management > SRM Server > Sourcing > Define Sourcing for Product Categories
Depending on product category you used when creating your SC, its items are relevant or not for Sourcing.
Regards.
Laurent. -
How to find out the user who has created a new field in the custom table.
How to find out the user details who has created a new field in the custom table.
Thanks,
JoanHi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
How to find out which keywords were used to create a smart album?
Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown. -
How to find out sub site name from which sub site template is created - in solution gallery
hi,
i am having an issue in my "save site as a template". i have created a subsite few weeks back with doc libs and splists, disc.forum and based on the template subsite I have created new subsites. now
as per my new requirement i need to add new doclibs and few columns in these doc lib. But I am unable to find which sub site was taken as a template.since i have many subsites with different names, I forgott
to make meaningful names, i gave some datetime for the templatesubsites,
like project_27_jul_2pm,project_20_jul_7pm, etc etc.
So would like to know, is it possible to find out from which subsite I have taken/prepared the template subsite.
any APIs are available or any power shell scripts. such that i can find out from which subsite i have created this sub site template.check this
http://social.msdn.microsoft.com/Forums/en-US/3c492adb-e7cb-4f5c-8c29-386a21c3498e/how-to-find-out-a-list-of-sites-created-from-a-template?forum=sharepointgeneralprevious -
How to find out which class/method is calling System.gc
Hi
I am seeing frequent FULL GC and not able to locate which particular class/method is calling the System.gc(). I have disabled it using -XX:DisableExplicitGC and performance issues have been resolved. Also, I noticed that it does not happen periodically, so it is not RMI GC. How to find out who exactly is doing this? Does any of of the profilers like Optimizeit/Jprobe help find out this.
ThanksHi
I am seeing frequent FULL GC This is because you are creating and destroying objects VERY frequently. Try to look at your design and see where you can reuse objects (i.e. object pooling) if possible, that is if this is adversely affecting performance.
and not able to locate
which particular class/method is calling the
System.gc(). Classes don't call GC. The VM handles that automagically.
I have disabled it using
-XX:DisableExplicitGC and performance issues have
been resolved. Also, I noticed that it does not
happen periodically, so it is not RMI GC. How to find
out who exactly is doing this? Does any of of the
profilers like Optimizeit/Jprobe help find out this.OptimizeIt will tell you everything you need to know. However, NetBeans offers a free profiler now! -
How to find out if LOB is stored "IN ROW"?
Hi,
If I have a compressed secuerfile LOB defined as "enable storage in row", is there any way to find out how many LOBs are stored in the table segment and how many where moved "out" in the lobsegment due to exceeding the approx. 4000 byte limit?
If I haven't defined the question clearly enough, please let me know.
Thanks in advance for any answer and regards,
JureMaybe I didn't explain the question well. I didn't ask how to find out from the data dictionary whether the LOB is defined as "enable storage in row" or "disable storage in row". I asked how to find out how many LOBs (LOB instances) are stored "in row" (in the table segment) and how many in the lobsegment, given that the LOB is defined as "ENABLE STORAGE IN ROW" with enabled compression.
If I write the question in another way:
Suppose I have a heap table with a LOB column defined as SECUREFILE COMPRESS HIGH, e.g.:
CREATE TABLE test1 (id INTEGER, test_b BLOB)
TABLESPACE USERS
LOB (test_b) STORE AS SECUREFILE (
TABLESPACE USERS
COMPRESS HIGH
ENABLE STORAGE IN ROW
CHUNK 8192
)There are 1000 rows of data in the TEST1 table. The data length in the test_b BLOB varies from 100 bytes to 1MB, so some of those BLOBs are stored in the table segment (those with size approx. smaller than 4000bytes as described here http://download.oracle.com/docs/cd/E11882_01/appdev.112/e18294/adlob_tables.htm#sthref320) and some are stored in the lobsegment. My question is, how to find how many LOBs are stored in the table segment and how many are stored in the lobsegment due to exceeding approximately 4000 bytes (4000 bytes being the limit where the LOB is moved out of the table segment).
The obvious answer could be to check the size of the LOB and if it is less than 4000 bytes (actually less than the size reported by the DBMS_LOB.GETCHUNKSIZE function) and based on that know where the LOB data is stored, but there are two problems with that approach:
- how to account for data compression
- even if the lob is defined as "ENABLE STORAGE IN ROW" and it's less than 4000 bytes in size, it could still be stored out of the table segment: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e18294/adlob_tables.htm#ADLOB45273 : "If you update a LOB that is stored out-of-line and the resulting LOB is less than approximately 4000 bytes, it is still stored out-of-line."
I hope I asked clearly this time.
Regards,
Jure -
How to find out structure of internal table?
Hi
is there any way how to find out name of structure upon which internal
table was created?
i got internal table passed to function module by any table
type. There can be different types of table passed in. Inside of
module a need to find out the structure of table.
I've found a tricky way how to find this information using following
command 'DESCRIBE FIELD dobj INTO td.', but its probably not a correct
way because using this command is not recommended in application
programs.
Is there any function module, or something i can use for getting this information?
ThanksThanks very much
This has solved my problem:
DATA descr_ref TYPE ref to cl_abap_typedescr.
DATA tabname TYPE string.
descr_ref = cl_abap_typedescr=>describe_by_data( itab ).
tabname = descr_ref->absolute_name. -
How to find out which object on a JPanel was clicked...
I have a JPanel that contains about 200 other small JPanels(only 8 are visible at any one time), and a JButton(with Visible set to false).
When one of the small JPanels is rightclicked i want to know which one was clicked so I can add the JButton to it (set theJButton Visible on the JPanel that was rightclicked). When the JButton is clicked, it will hide the JPanel it was on and hide itself again.
I added a MouseListener(MousePressed) to the main Jpanel but I dont know how to find out which of the smaller JPanels was clicked. I would Also need to know how (in the ActionEvent for the JButton) the JButton knows which JPanel it is on so it knows which one to delete.
------------------------------------------------------------------CODE
void JPanel1_mousePressed(MouseEvent e) {
if ((e.getModifiers() & e.BUTTON3_MASK)!=0){
------------------------------------------------------------------CODE
void JButton1_actionPerformed(ActionEvent e) {
------------------------------------------------------------------CODE
Can this be done or should I add a MousePressed Listener to each of the 200 small JPanels and create a JButton for each of them??
Any Info Appreciated... Thanks....Here you get a hint, hope have added all mouseListener as well and registered....addMouseLi...etc
// many JPanels here...
JPanel clickedPanel; // a reference only
// In mouse Click..
public void mouseClicked( MouseEvent e ){
clickedPanel = e.getSource( );
clickedPanel.add(new JButton("Look, I am Added") );
} // it is Only HINT, a working HINT
Maybe you are looking for
-
I navigated to disk utility and verified disk, which returned no errors.
-
How to "relink" the iTunes library linked with my iPhone 4 with out lost my iPhone apps
When I started to use iPhone, I synchronize it with my MacBook and the iTunes playlist currently in use on this computer. Unfortunately my computer and my Time Machine backup had an accident and I should change the HD of the Macbook and the external
-
Image upload with save to database
Quick question guys, Can Image upload with save to database be added to an existing form in order to save other info as well as the file name to the database. Thanks Col F
-
Adapt app runtime for diferent aspect ratio
as I can scale and position the sprites of a stage and that they are in an area defined by the screen size (the image of serious background constant) but to adapt the sprites within a frame or area that would be the screen size. The algorithm would b
-
CVI Dynamically determine 64 vs 32 bit machine
Is there some API, in CVI (LabWindows), that I can use to determine the architecture, 32 vs 64 bit, of the machine my app is running on? The reason is that I have a call to open a file under 'Program Files' but if it is a 64 bit machine I need to mak