How to find out sites using MMS term sets
Hi,
We have many site collections utilizing MMS termsets and terms across libraries and lists. Is there a way to take out an extract across the farm as to which sites/libraries/lists are using which term sets or terms?
Shonilchi..
Hi Shonilchi,
You can try iterating each site and list, check if there is a managed metadata column in a list then iterate each list item to read managed metadata column value, and output to a file programmatically.
http://sharepoint.stackexchange.com/questions/65066/how-to-programatically-tell-if-a-field-is-a-taxonomy-managed-metadata-field
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/677028e8-de4f-484a-9405-41a85f1b3071/read-taxonomy-field-value-of-a-list-item-from-sandbox-webpart
Thanks
Daniel Yang
TechNet Community Support
Similar Messages
-
How to find out the used space and free space in the DB for attachments
Hi,
In CRM 5.2 web UI, we can save a transaction by saving attachments like work documents or text files.
Could someone help me find out the used space, free space, maximum capacity on the CRM DB for these attachments.
Thanks & Best Regards,
Ramesh.Hi,
check with below table
TNAPR --- Processing programs for output
and NACE Transaction code
NACE -- out types
Regards,
Madhu -
How to find out where used list of Table or T-code
Dear ABAP gurus
I know many of you have done this several times.
wish to find out which Transaction code INSERTs the data into the table IHPA.
I did the where used list - SE11 ( for specific key work called INSERT ).
Used the Table called D010TAB which has some information.
Vise versa if I know a T-CODE , how to know which tables it read & Modify...
any better procedure than spending hours in research...
I found similar custom program to find USER EXITS ...here..., looking soething similar...
[http://wiki.sdn.sap.com/wiki/display/Snippets/FindUser-exits%2CBADIs%2CBTEs%2CEtcbyTCodeorProgram]
thank you for your help
Edited by: Raj Anvesh on Aug 3, 2011 9:58 PMHi Anvesh,
Maybe the data INSERTION is happening by BAPI,
So just try to look for the concerned BAPIS.
ECP_SRV_PARTNERS_IHPA
IREP1_IHPA_ADRNR_PRE_FETCH
IREP1_IHPA_ADRNR_READ
MAP2E_DIIHPA_TO_PARTNER
MAP2E_IHPAVB_BAPI2080_NOTPARTE
MAP2E_IHPAVB_TO_BAPI_IHPA
MAP2E_IHPA_BAPI2080_NOTPARTNRI
MAP2E_IHPA_M_BAPI2080_NOTPNRI
MAP2I_BAPI2080_NOTPARTNRI_IHPA
MAP2I_BAPI_IHPA_TO_IHPA
PM_DB_FILL_DIIHPA
PM_PARTNERCOPY_FILL_XIHPA
PM_PARTNER_DELETE_XIHPA
PM_PARTNER_GET_XIHPA
PM_PARTNER_PUT_XIHPA
PM_PARTNER_REFRESH_XIHPA
these are the bapis which are dealing with the IHPA table,
Segregate them as needed and then go to the std program
Revert for further clarification.
Thanks
Sri -
How to find out theTables used in the program
hi experts,
can any one tell what are the ways to find out the tables used in the program
thanks in advance.Hello,
Below are some tips:
1. If custom program- SEARCH for "TABLES" or "SELECT" stmt.
2. The full-proof way will be to activate SQL Trace. Goto tcode ST05, check SQL Trace & then activate trace.
Execute the program. After execution is complete, deactivate trace & then display trace. You will get all the tables which are being used.
BR,
Suhas -
How to find out Tcode Used and their hit rate over a given period of time.
Hi All,
We wanted to know what are the tcodes that are used and how many times over a period of time..
Can you please suggest the ways to find this out..
I have heard of ST03N but not sure how to use this and then download the information ..
Regards,
Vidya..Hi,
Check this
[How to get list of frequently used TCodes] -
How to find out Unused Packages/Procedures/Functions/Triggers
Hi,
I have one database. This database is with 7 schemas. Around 1000 triggers are associated with each schema. But the application is using only some triggers.
How to find out the used triggers? Apllications is developed in J2EE.
Same way I want to find out the for Packages/Procedures and Functions.
Any easy way is available?
Please help me.
regards
MathewHi,
>Audit the execution event on the objects by access.
Kindly explain how to enable this auditing.
regards
Mathew -
Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level. -
How to find out which keywords were used to create a smart album?
Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown. -
Hi there,
How to find out which lists are email enabled in my SP 2010?
Any script? Anything else?
Thank you.Hi frob,
check this script that is stated on this link
$SPwebApp = Get-SPWebApplication "http://migration.Company.com"
<# If it is MOSS 2007, You can use:
$SPWebApp = [Microsoft.SharePoint.Administration.SPWebApplication]::Lookup(http://sharepoint.com)
To get SPWebApplication Object
#>
#create a CSV file
"E-Mail,List,Site" > "EMail-Enabled.txt" #Write the Headers in to a text file
foreach ($SPsite in $SPwebApp.Sites) # get the collection of site collections
foreach($SPweb in $SPsite.AllWebs) # get the collection of sub sites
foreach ($SPList list in $SPweb.Lists)
if ( ($splist.CanReceiveEmail) -and ($SPlist.EmailAlias) )
# WRITE-HOST "E-Mail -" $SPList.EmailAlias "is configured for the list "$SPlist.Title "in "$SPweb.Url
$SPList.EmailAlias + "," + $SPlist.Title +"," + $SPweb.Url >> EMail-Enabled.txt #append the data
http://www.sharepointdiary.com/2011/06/find-all-incoming-email-enabled-lists.html
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation. Please remember to mark the reply as answer if it helps. -
How to find out the Transactions used per month & the USER who used that
Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
layout TYPE slis_layout_alv,
variant TYPE disvariant,
events TYPE slis_t_event WITH HEADER LINE,
heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
wa_usertcode TYPE swncaggusertcode,
wa TYPE zusertcode,
t_ut TYPE STANDARD TABLE OF zusertcode,
wa_result TYPE zusertcode,
t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
EXPORTING
component = 'TOTAL'
ASSIGNDSYS = 'DEV'
periodtype = 'M'
periodstrt = month
TABLES
usertcode = t_usertcode
EXCEPTIONS
no_data_found = 1
OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
wa-user = wa_usertcode-account.
IF wa_usertcode-entry_id+72 = 'T'.
wa-tcode = wa_usertcode-entry_id.
wa-report = space.
ELSE.
wa-tcode = space.
wa-report = wa_usertcode-entry_id.
ENDIF.
COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
is_layout = layout
it_fieldcat = fcat[]
i_save = 'A'
is_variant = variant
it_events = events[]
TABLES
t_outtab = t_ut
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA -
How to find out FICO user exits that are used by User
How to find out the FICO user exits that are used by user.
Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks. -
How to find out which type of the driver is used in our application?
Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
PhoenioxHi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
for(int i=0;i<drivers.size();i++)
Driver driver = (Driver)drivers.get(i);
String driverName = driver.getClass().getName();
System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath -
How to find out which C library I am using?
On my Solaris 9 UltraSparc system,
% echo $LD_LIBRARY_PATH
/opt/gcc/3.4.4/lib:/opt/glib/2.12.1/lib:/opt/gnome/lib:/opt/openssl/0.9.7g/lib
% /usr/lib/libc.so
usage: ld.so.1 [-e option,...] dynamic-object [object args,...]
On my Solaris 10 x86 system,
% echo $LD_LIBRARY_PATH
/pkg/gcc/4.2.1/lib:/opt/gcc/current/lib:/opt/glib/2.10.1/lib:/usr/sfw/lib:/usr/lib/mps:/opt/openldap/lib:/opt/openssl/current/lib
% /usr/lib/libc.so
usage: ld.so.1 [-e option,...] dynamic-object [object args,...]
On my Linux/x86 system,
% echo $LD_LIBRARY_PATH
/opt/openssl/0.9.7g/lib:/opt/gcc/3.4.4/lib:/opt/binutils2.13/lib:/opt/glib/2.12.1/lib:/opt/java/j2sdk1.4.1_01/lib
% /lib/libc.so.6
GNU C Library stable release version 2.6.1, by Roland McGrath et al.
From the above, can one tell what C library I am linking to on the Solaris systems? If not, how can one tell? How do I know the exact location of the C library I am using?
On the Linux/x86 system, I can use gnu_get_libc_version() to find out the version of glibc I am supposedly using. But it does not work when I compiled the identical C program using gcc on the Solaris 9/UltraSparc and Solaris 10/x86 systems. If I can use gnu_get_libc_version() , does that mean for sure that my C program links to glibc? On the other hand, if the linker reports that gnu_get_libc_version() is not found, does that mean for sure that my C program is not linked to glibc?
Is there a function on the Sun libc similiar to gnu_get_libc_version()?
http://docs.sun.com/source/819-3690/Using.Libs.html says "The Solaris operating system comes with several libraries installed in /usr/lib. Most of these libraries have a C interface. Of these, the libc and libm, libraries are linked by the CC driver by default." If one wants to link to the glibc library, how to override the default? How to find out the default? Is it in some environ variable? If one changes the CC driver to gcc, does the default remain the Sun libc? And if one compiles explictly using gcc, i.e. "gcc myprog.c", is the default C library the Sun Library, or glibc?
gnu.org has a (web page for the) glibc manual but I am not able to find a Sun C Library Manual. Is there one?
Edited by: hzmonte on Jun 28, 2008 1:43 AMI'll discuss only the Sun C compiler here. For questions about gcc, look in the gcc manual, or try a gcc forum.
Run the command "ldd" on an executable file or shared library, and it will report the shared libraries that it will link to, based on any runpath in the file, and on LD_LIBRARY_PATH. Example: % echo $LD_LIBRARY_PATH
LD_LIBRARY_PATH: Undefined variable
% cc hello.c
% ldd a.out
libc.so.1 => /lib/libc.so.1
libm.so.2 => /lib/libm.so.2
/platform/SUNW,A70/lib/libc_psr.so.1 BTW, except possibly for testing, there is usually no need to set LD_LIBRARY_PATH, and setting it is usually a bad idea. For more on this topic see Rod Evans' blog:
[http://blogs.sun.com/rie/entry/tt_ld_library_path_tt]
Prefer to set a runpath in the executable so that no client needs to set LD_LIBRARY_PATH.
If you want to know what libraries the C compiler will link, based on a given command line, you can add the -v (verbose) option, which will display each subcommand. Or you can use the -### option, which shows what commands would be run. Example: % cc -### hello.c
### Note: NLSPATH = \
/opt/SUNWspro/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/opt/SUNWspro/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
### command line files and options (expanded):
### hello.c
/opt/SUNWspro/prod/bin/acomp -xldscope=global -i hello.c -y-fbe -y/opt/SUNWspro/prod/bin/fbe -y-xarch=generic \
-y-xmemalign=8i -y-o -yhello.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly \
-xdbggen=incl -y-s -m32 -fparam_ir -Qy -D__SunOS_5_10 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix \
-D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun \
-Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/opt/SUNWspro/prod/include/cc \
"-g/opt/SUNWspro/prod/bin/cc -c " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
### Note: LD_LIBRARY_PATH = <null>
### Note: LD_RUN_PATH = <null>
/usr/ccs/bin/ld /opt/SUNWspro/prod/lib/crti.o /opt/SUNWspro/prod/lib/crt1.o /opt/SUNWspro/prod/lib/misalign.o \
/opt/SUNWspro/prod/lib/values-xa.o hello.o -Y "P,/opt/SUNWspro/prod/lib/sparc:/opt/SUNWspro/prod/lib:/usr/ccs/lib:/lib:/usr/lib" \
-Qy -lc /opt/SUNWspro/prod/lib/crtn.oThe basic runtime support library is /lib/libc.so.1, on any version of Solaris, used by every compiler version. You can check the patch version of the library by running
showrev -p | grep <patch>
where <patch> is the patch number for the library. The patch number depends on the Solaris version. You can get more information at [http://sunsolve.sun.com].
There is no manual specifically for the C library. There is a Solaris man page for each function in the library, and you can check the C Users Guide and the Solaris Linker and Libraries Guide for additional information. -
How to find out which query run how many times using ST03?
Hi experts,
I am trying to clean up all the junk queries in BWP. my questions is, How to find out that the particular query ran how my times in a year and by which user using ST03, How to do it step by step?
I don't like to use statistic reports for this. How to do it using ST03?
Please let me know. Thanks in advance.
Sharat.Hi,
Please find the below links which would help you solving you problem,
SAP BW performance tunning : Includes screen shots
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/68fbb490-0201-0010-8eb5-f7e0adaff5bd
SAP BW Query Performance Tuning with Aggregates:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
With Regards,
PCR -
How to find out Query last used by whom
Dear All,
Can any one tell me that "How to find out the Query last used by whom. I have already searched in SDN but no luck. In my system BW Stats are not installed and I have already checked the below tables.
RSZELTDIR - Directory of the reporting component elements
RSZELTTXT - Texts of reporting component elements
RSZELTXREF - Directory of query element references
RSRREPDIR - Directory of all reports (Query GENUNIID)
RSZCOMPDIR - Directory of reporting components
RSZRANGE - Selection specification for an element
RSZSELECT - Selection properties of an element
RSZELTDIR - Directory of the reporting component elements
RSZCOMPIC - Assignment reuseable component <-> InfoCube
RSZELTPRIO - Priorities with element collisions
RSZELTPROP - Element properties (settings)
RSZELTATTR - Attribute selection per dimension element
RSZCALC - Definition of a formula element
RSZCEL - Query Designer: Directory of Cells
RSZGLOBV - Global Variables in Reporting
RSZCHANGES Change history of reporting components
I am able to find out the Date and time but not the user name. So could you please help on this.
Regards
Sankari think u have missed it.
RSZCOMPDIR IS THE ONLY TABLE WHICH PROVIDES THE DATA.
ENTER TECHNICAL QUERY Name in RSZCOMPDIR-COMPID.
RSZCOMPDIR-TSTNAM gives you the user id of sap bw user who made the change.
RSZCOMPDIR-TSTPDAT gives you date on which change was made .
RSZCOMPDIR-TSTPTIM gives you timestamp on which change was made .
all users details can be obtained from TCODE SU01 where you need to enter sap user id.
You can also get user name( description) by using tcode SE09 and entering above sap user id.
Maybe you are looking for
-
I forgot to hit the disconnect button in itunes now my ipod touch 3rd gen is unresponsive
After syncing files onto it i unplugged it from my computer and now it is completely unresponsive. I have tried everything from hitting both hold and center button and holding them for up to a minute, to reconnecting it to my computer wich doesnt rec
-
Why does my printer icon no longer show on topleft?
The printer icon used to be at top left . There is a printer icon on bottom right but clicking on it does not get my printer printing.
-
In Mail, my message preview used to be shown to the right side of the messages. Now it is showing below the messages. How can I move it back to the right?
-
Hide Logical Db Selection Filed
Hi guys!! Is it possible to hide a selection field provided by the logical database? For instance: I use the LDB PSJ. In my ABAP code I have: GET prps_r. Get proj. When I run the
-
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?