How to find out tcode from a program that can run the same report?

Hello all,
I have a program name and I can see it is successfully proccessed. Now if I want to get the report via a tcode, how can I get it?
How can I find the tcode from the program itself?
Regards,

Hi,
1) Go into SE80, > Enter the name of the program, and press 'Enter'.
2) You will see a folder called 'Transactions' appearing in the object list on the bottom left.
3) Open the folder, and you'll find T.code of that program.
Thanks,
Nirav

Similar Messages

How do I remove pictures from my iPhone that can't be deleted?

How do I remove pictures from my iPhone that can't be deleted?

What pics?
This is very vague.
If you mean pics that you synced to your iphone form your computer, then delete them the same way. Open itunes, connect iphone, select what you want to be on your iphone, sync.

Can I restore OSX to a disk, from a backup that's on the same disk?

I have a Powermac G5 Quad, that has two internal drives. (a 250gb system drive, and a 500gb spare).
Both drives are now out of space. I want to purchase a 1TB drive to replace the 250 system drive.
Tell me if this plan makes any sense:
1. Remove the 500gb spare drive.
2. Install the 1 TB drive, format, & use it as the Time Machine backup disk for the system drive.
3. Once the backup is complete, Remove the 250gb system drive.
4. Boot to the 10.5 Install DVD, and select "restore from backup"
5. Use the Backup on the 1 TB Drive, to install the OS on the same disk.
It's step # 5 that I'm not sure will work. Can I install an OS to a disk, from a backup that's on the same disk?

Sorry it took me so long. I had a baby. Anyway, here's how it went down:
I attempted to use the disk utility to "Clone" the original 250gb system disk to the new 1tb Hard drive.
It did not work. Tried booting to the Leopard install disk, and doing it from there, no dice.
So, I went ahead and created 2 partitions on the new 1TB disk. One I called "Time Machine" and it was 300 gigs. The other I called "New System Disk".
I booted to the "Old" System disk, and set up Time Machine to back-up to the "Time Machine" partition. It took 5 hours to back up 250 gigs, but it worked.
I then booted to the 10.5 Install DVD. one of the utilities you can use is "Install from Time Machine Backup" This worked. Took about 5 hours to copy everything to the new "New System Disk".
When that was done, I removed the old system disk. It booted to the new system disk without any trouble.
I was now stuck with a "Time Machine" partition that I did not want. It was EXTRAORDINARILY EASY to delete that partition, then re-size the other one so it took up the entire 1 Terabyte of available space.
So, the answer to the question is: Yes, you can use Time Machine to restore to the same disk, provided that the disk is using two partitions.

Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?

There are many a thousands of people who are producingvideos on completed DVDs. As an amateur videographer using iMovie first nowusing Final Cut pro to produce completed ready to distribute DVDs, I find ithard to believe at the meeting you mentioned anyone with common sense wouldhave explained the scenario above. On an amateur level so many folks have beencreating videos of Weddings, Home Movies, and many different Special Events. Onin particular are sports events. I shoot a sports event like Mix Martial ArtsEvents utilizing several video cameras. Then editing with Final cut Pro andsometimes iMovie. All of my completed videos that have been edited in either ofthese two programs are shared (like hand in glove) with iDVD. Short of steppinginto the commercial world Apple has deleted many people from producing a semiprofessional looking product.
I do not know if the can be answered here in the format buthere it goes!!
Simple question. Since apple has extinguished iDVD Are thereany other Software programs that can produce the end product iDVD did? Googlesearches with years of outdated info does not give good references. Withoutlooking to go commercial, the Apple Macintosh Computers built internal Softwareprogram like iDVD is the only program I know of that can help folks on mylevel!!
It doesn't seem there are any programs that takes off fromwhere iDVD left off. My end products (complete videography from start tofinished printed and burned DVD) needs to have the mapping and control usingthe semi professional look iDVD gave!
Have any ssuggestions?

Thank you Klaus 1
I have 4 latest Macs All have iDVD. The question was not where to get iDVD.
The question for anyone who knows is: Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?
I appreciate your input but it realy does not answer the question. iDVD will soon not be able to work with newer versions of Macs as it has been left behind by Apple!
Once again:
It doesn't seem there are any programs that takes off from where iDVD left off.
My end products needs to have the mapping and control using the semi professional look iDVD gave me.
Imovie cannot do this. More importantly imovie cannot save the project to Video_TS folders like iDVD did.
Anyone have suggestions?
My full post is just below:
There are many a thousands of people who are producing videos on completed DVDs. As an amateur videographer using iMovie first now using Final Cut pro to produce completed ready to distribute DVDs,
On an amateur level so many folks have been creating videos of Weddings, Home Movies, and many different Special Events. One in particular are sports events. I shoot sports event like Mix Martial Arts Events utilizing several video cameras. Then editing with Final cut Pro and sometimes iMovie. All of my completed videos that have been edited in either of these two programs are shared (like hand in glove) with iDVD. Short of stepping into the commercial world Apple has deleted many people from producing a semi professional looking product.
I do not know if anyone can this question but here it goes!!
Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did? Google searches with years of outdated info does not give good references. Without looking to go commercial, the Apple Macintosh Computers built internal Software program like iDVD is the only program I know of that can help folks on my level!!
It doesn't seem there are any programs that takes off from where iDVD left off. My end products (complete videography from start to finished with printed and burned DVD) needs to have the mapping and the control by using the semi professional look iDVD gave!
More importantly imovie cannot save the project to Video_TS folders like iDVD did. Something for folks like myself who need this to burn to our multi burning DVD all in one printers!!
Anyone have suggestions?

How many users can view the same report at the same time in obiee answers

Hi All,
How many users can view the same report at the same time in obiee answers..?
What is max and minimum number of users.
Do we need to increase any system configuration.
Thanks,
Jagadees.

Hi,
Many users can view report at same time.It depends on the server if it can accept those many users at same time.If number of users increases OC4J may not work properly.
Refer : http://www.artofbi.com/index.php/2009/10/what-is-oc4j-an-oracle-application-server-distribution-really/
Regards,
Srikanth

HT1310 do you have any programs that can hold the start up manager everytime when I turn on the computer?

Do you have any programs that can hold the start up manager everytime when I turn on the computer?

I am not sure but if they do have the way to do it, I would like to try. But I prefered the easy way ^_^
I do have intel iMac and the version of OS X is 10.9.1 .
Thank you so much

How to find out OrgUnit from the MSS team viewer iview

Hi Experts,
Please refer following link:
https://wiki.sdn.sap.com/wiki/display/profile/HowtoreadinformationfromtheteamviewerinWeb+Dynpro
Using this link, I am able to find out the perno.
I have to find out OrgUnit of selected person. I did the mapping. I have also written following code:
String orgunit = wdContext.currentSelectedOrgUnitElement().getObjid();
wdComponentAPI.getMessageManager().reportSuccess("You have selected orgunit "+ orgunit);
However, orgunit value is always null
Can you please let me know how we can get the orgunit in this case?
Regards,
Gary

Hi Gabriel,
Requirement 1
Thanks. I did so. Using this I can see the OrgUnit. However, this is the OrgUnit of MSS user. It remains same through out the program. It is unlike pernr which changes as the user clicks on different Employees.
My exact requirement is as below:
User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Structure". Here organization structure will be displayed. Now the user will expand Org Structure. I want to know the Org Unit of different Organization as the user will go on expanding the Org Structure using the buttons
Requirement 2
User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Unit". Now we can see the Go button. I have to write some code on the button. Where I can find the code for the button. I spent lot of time. I am not able to find out the exact place where the view for the button is located.
Please help.
Regards,
Gary

How to find out tcode for the zprogram.

Hi All,
How to find out the Tcode of a Zprogram.
I will appritiate your help.
Thanks,
Veni.

Couple of ways to do this, one is to go to SE93 and do F4 on the transaction code field, click information system, click the all selections icon, then put the name of the z program in the field, and hit enter, this will give you the tcode.
Regards,
RIch Heilman
Message was edited by:
Rich Heilman

How to find out back end mapping program for Idoc ?

HI Experts,
Iam new to ALE IIDOCS .. i have a issue in existing idoc .
Some data maping problem is there in the existing idocs
I need to find out back end program for this perticular idoc no .
Exactly where they have written the maping code .
How to find out this ?
is there any preceedure to trace the back end program based on the idoc number .
Regards
RameshG

Hi Ramesh,
If you are looking at Inbound que then we generally double click on idoc go to control datat info and then take partner data info there
Goto we20 check teh system and there double click the message type and there in inbound option double clik the porcess code it gives you one FM where you can see logic written to process that IDOC
Regards,
Poornima

How to recover erased documents from pdf notes that are in the icloud backup?

Hello,
Does anybody know how to recover documents erased from pdf notes that are in an Icloud backup? Thanks
mpintok02

You could restore from a previous backup. How to: http://totalipad.com/how-to-restore-your-ipad-from-a-previous-icloud-backup/

How to find out index from table?

Hi all,
I've tried to create indexes to some columns from some tables to use for Oracle Text.
I ve got a error message saying that I can not create an index:
"cannot create multiple domain indexes on a column list using same indextype".
I was wondering if an index already exists for that column, how do I find out the name of the index that points to that paticular colum?
Thanks a lot
E.

Check the view dba_ind_columns
That will tell you.
something like;
select index_name, column_position, column_name from dba_ind_columns
where table_name = '<table name>'
order by 1,2

How to find out Application from Component

Hi Experts,
I have a component called FITV_VT_TRIP_DOCUMENT which is called from two applicatons FITV_POWL_TRIP and another one say ABC.
Now i need to know which application is calling the component.
Is there any Class->Method to find out the application name from component.
Or Is there any method to get the browsers URL from that component.
Thannks,
chandra

Hi,
When you pass the Application name you can get the URL (But this can be mapped to external alias also).
* Generate the url for the component
CALL METHOD cl_wd_utilities=>construct_wd_url
    EXPORTING
      application_name = 'ZWDC_SALES_REPORT' "Application name
    IMPORTING
      out_absolute_url = lv_url.    "String
   "This can be an internal alias
Refer these links -
To get Component name from Application -
How to get Component name from Application
Get the Calling WD component name -
The name of calling WebDynpro
Regards,
Lekha.

How to find out last_query from jsp form in oracle applications

Hi
At present i am working on Quality Module.
in India Localization.
In Quality module -> Results -> Inquiries -> Skip Lot Inquiry
If i enter our organization name
Then its openning one form.
I am unable to find out the table names from the jsp form.
User also unable to comment on it.
So, please help me on this issue.
Regards,
Pradeep.

Hi
Once you open the jsp form, at below leftside corner you can see link : About This Page. If you click on the link : About this Page this again open another window, there you can see multiple tabs at header level, if you click on page tab, there you can all the VO objects used to build this page. If you click on VO object hyperlink you can see the query.

How to find out combination from following situation

Dear all,
It is bit different,with your permition,i am taking this apartunity to make some changes.
1 2 3 will always be in this order {123}, i want to find out number of cases can be made,
like {1},{2},{23},{13},{12},{123}{3},{}. but each number has two states like "a" "b", i.e,
each one will become different entity,like 2a,2b,3a,3b,1a,
with only exception i.e. 1 will have only one state 1a.
please tel me step wise using formulas, so that i can understand, also any link will be helpfull.
is there any way to solve this using tsql program or any programm exist in any other language.
yours sincerly

Hi Saeid
Compare the Execution plan of those queries:
SELECT 'a' s UNION SELECT 'b'
SELECT 'a' s UNION ALL SELECT 'b'
If you know that the values are unique always use UNION ALL and not UNION :-) It is much better (in the execution plan comparing the queries above you will get 56% vs 44%).
[Personal Site] [Blog] [Facebook]

How to find out whether an exe program is running?

HI,
I'd like to run an executable program from TestStand. Before I do that I would like to check whether this program is already running?
Can it be done?
Thanks

Hey Rafi,
It can be done. You have a couple options. All of the processes are handled by the Operating System so you can possibly try:
1- Call a code module that will call into the Windows API and get all the process and see if that particular one is executing.
2- Using ActiveX steps call into the Windows API to get all the process and see if that particular executable is running.
You may have to read more about the Windows API to do this but I also think there are some SDK functions available to you as well. Here is a link to an MSDN example: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dllproc/base/enumerating_all_proces...
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How to find out tcode from a program that can run the same report?

Similar Messages

Maybe you are looking for