How to Find out the all tables in module wise ?

Dear Friends,
1.How to Find out the all tables in module wise ?
what are the total number of table in SAP ?
2. how to find out all existing functions in SAP ?
Thanks and regards,
Subasha Chandra Sahoo.

Hi,
You will get the module wise list from:
http://www.sourceveda.com/SAPReference.htm
http://www.sourceveda.com/
Regards...

Similar Messages

Given a business object type, how to find out the underlying table name ?

Hi,
Given a business object type (e.g. BUSxxx), is there any Function Module that can be used to get the table name for that object ?
Have been through the SWO* FM's but did not get anything yet.
Pls let me know how this can be done.
Regards,
-Kev.

>
Kelevenwise wrote:
> Thanks Christine for the response..
> Let me add a few more details to clarify my requirement
>
> I need to read the data of business objects (not a specific one, but the application should be able to read data of any business object). Given a table name, I am able to figure out the column information and read that data. But all I have is the business object type, so would need to figure out all the tables (as you helpfully pointed out, there could be more than 1 for a business object) and then read from those tables.
>
> The reason I feel I cannot use the business objects methods directly is because I would not know which method to call to get me the relevant data - this is an external application, not called from within the system.
>
> Is there another way to achieve this requirement ?
>
> Regards,
> - Kev.
So, assuming for the moment we are just dealing with the PO BUS2012 business object, your external application will be passing you a BO type and also (presumably- otherwise you could be sending back an awful lot of data) a BO key, and you then want to send back all the detail for PO - exactly what the GetDetail method that is present on most objects does - is that right?
Since most BOs have a GetDetail method, can't you just use that?
Though I really can't see why your external application would be interested in all SAP BOs - most applications are a bit more specific than that.

How to find out the orizinal table for any wiew

I have a maintaince view (name of the view is V_T001K_ASSIGNV) so i cant make a selection quarry on that view as it is maintaince view. is thare any table in sap for for a particular maintaince view and what is the way to find out that table for that view so i can make a quarry.

Go to SE11 ---> display the view, there right side you will find tables related to that view, based on your requiremnt take the table,
Regards,
Mallik.

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

Hi all, How to Find out the table where Cutomer Enqu. status is Stored??

How to Find out the Customer Inquiry Status.
I am not able to find in which table Status of Customer Inquiry is Stored.
Is There any FM to find out This.

Please post your question in the right forum to have your query addressed soon...
I think you can check JEST table all status

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

How to find out the tables from extract structures

Hi All,
As I know my data sources are 2lis_04_p_matnr,2lis_04_p_comp,2lis_04_p_arbpl.
How to find out the tables concerned with the fields in the extract structure.
Thanks

Pl check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
OR navigate to: help.sap.com - netweaver - bi content - supply chain - look for your application area and the extractor and you will see the source tables and fields.
Ravi Thothadri

How to find out the table name

hi,
how to find out the table name in which the data from a particular structure in a particular screen is saved,
please tell me the procedure to find out the table name for saving the structure data that is inputted at runtime.
Thanks,
chinnu

Hi Chinnu,
Below are the tables that are referred to find out the table names
DD02L Table contains the SAP Tables.
DD02T Table contains the SAP Table Texts.
DD01L Table contains the Domains
DD01T Table contains the Domain Texts.
DD03L Table contains the Table Fields.
DD03T Table contains the Table Field Texts. (Language Dependent)
DD04L Table contains the Data Elements.
DD04T Table contains the Data Element Texts.
DD05s Table contains the Foreign Key Fields
last words with L and T only. L->Database Fetch T-> Text
And the procedure to retrive the table name is as follows
1. Go to se11
2. Enter table name DD03T and execute
3. In the next screen you can find Tables, fields, test etc. there you can enter the field name in the fields
and execute.
4. you can get all tables which contains the field.
I hope this will solve your problem
Regards,
Chandru

How to find out the tables related to CRM datasources?

How to find out the tables related to CRM datasources? For example, the table related to 0CRM_OPPT_H.
Regards,
R.Ravi

Hi Ravi,
To find out all tables used go into the CRM source system to transaction RSA3 and prepare the selections for extraction of your datasource.
In a parallel session execute transaction ST05 and press the button 'Activate Trace'
Go back to the extracor checker and execute the extraction.
Switch sessions and subsequently 'Deactivate Trace' and 'Display Trace'.
This will list all tables used.
regards,
Olav

How to find out the tables that will be affected using a transaction

Hi,
How to find out the list of database tables that will be affected when we use a standard transaction(ex. VA01, MM01..)...?(like When we create a salesorder, which tables and which fields will be affected..?)
Is there any transaction or a simple way to find out the solution?
Thanks,
Pradeep.

Hi,
Give transaction code and in menu(system- status), double click onthe Program name.
Check in TOP INCLUDE - you will find all the tables related to that transaction.
Thanks,
Anitha

How to find out the link for the tables for sub contract PO

Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.

Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK.

How to find out the failed reorg tables during reorgnization phase

Dear All,
I am doing the archiving project.
I have finished the Write phase and Delete Phase.
Now I am doing the tablespace(PSAPSR3) reorganization in QAS(Offline).
Due to the redo log space was full during the reorgnization phase.
Some tables' reorgnization progress were failed.
Hope you could tell me how to find out the tables which reorgnization were failed.
(DB level? OS level? SAP Level?)
Thank you in advance!
Jason

/oracle/QAS/sapreorg

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How to find out the source of an event fired by button in a table in WD?

Hi experts,
I'm new to Web Dynpro and I need to know how to find out the source of an event (IWDCustomEvent) fired by a button in a table? I need to know which one is the clicked button (on which row)?
Help will be appreciated
Regards

Hi GLM,
thanks for your reply. Yes I know about that but when a round trip to the server is made the lead selection is at the first row of the table and when i click the button on, for example, the 3rd row the getLeadSelection method returns 1 and the color marker for the current row stays on the first row. So I need to click first somewhere else on the 3rd row and then on the button in order to update the value of lead selection and it's not very nice. So if you have some other idea it would be very helpful. Or perhaps some workaround.
Regards

How to find out the Non Partitioned Tables used 2Gb on oracle

Hi team
how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system
regards

heres 1 I made earlier
set pagesize 999
set linesize 132
col owner format a25
col segment_name format a60
select owner,segment_name,segment_type,(bytes/1024/1024)"MB size"
from dba_segments
where owner not in ('SYS','SYSTEM','XDB','MDSYS','SYSMAN') -- edit for taste
and segment_type = 'TABLE'
having (bytes/1024/1024) > 2000
group by bytes, segment_Type, segment_name, owner
order by 4 asc

How to Find out the all tables in module wise ?

Similar Messages

Maybe you are looking for