How to find out the current  screen resolution/width in webdynpro.

HI,
Can any one please tell me how to get the screen resolution in webdynpro?
Regards
-Sandip

Hi Sandip,
- view size can be set by setting the 'width' of the RootUIElementContainer. By defalut, it will be 100% only. Also, It is always better to use the % coz it does not distort your view with different screen resolutions.
- while creating the iview, you have the property like 'HeightType'. There you can set the value as FIXED, AUTOMATIC & FULL_PAGE. If you wish, you may leave it as it is.
- All you have the properties like 'Fixed Height' etc to set the size values.
Regards
Chander Kararia
# Please close the thread once get the correct answer. Give rewards for answers.
Edited by: Chander Kararia on Feb 20, 2009 9:55 AM

Similar Messages

  • How to find out the current hostname?

    How do I find out the current hostname for a given SoaSuite installation?
    Peter

    You can check the WSDL of any of your BPEL processes on BPEL console.

  • How to find out the current form name

    Hi all,
    I have to pass the current sapcript form name in the sauroutine pool for some further processing.
    I just wanted to is there any variable, method, or way to find out the current/running Sapscript form name generically so that we can pass it on to subpool.
    Looking forward for your reply.
    Regards,
    Anuja.

    Hi All,
    Many thnaks for your replies.
    Actually in my case the situation is, i have to change in multiple forms.
    I mean the same perform needs to be used in all the forms almost around 20 using the current form name.
    So that perform should be generic. I mean is there any variable/ method or way to get the current form name so that we can pass that to the subroutine pool through form.
    Looking forward for yoour reply.
    Regards,
    Anuja.

  • How to find out the selection screen values

    Hi All,
    in BI we are having the maximum allowed cells as 500000 for a report.
    for some of the reports execution fetching the data morethan 500000 by different users.
    i could findout the report and user who has executed, But i wanted to findout for which selection user has executed.
    is it possible to find out...please help.
    Thanks,
    Krishna.

    Hi,,
    Yes it is possible.
    Open your query result in the design mode by going to BEx Analyzer->Design ToolBar
    Now take one text element and assign it to the variable which you have used for the selection screen.
    Take the same number of text element as there are in selection screen.
    Exit the design mode. In place of the text element you will find the value of the variables assigned to them.

  • How to find out the current number of rows in a form without navigation

    Hi.
    Is there any way to count the rows in a form (block) without navigation to the last record?
    I am modifying CUSTOM.pll and have to count the rows before user commits changes.
    All records are new in this case. Can anyone halp me? Thanks.
    Regards
    Tomáš

    Magoo wrote:
    no, such a block-property ^unfortunately^ does not exists.
    you can just go to to the block, call the last_record build-in and find out, where the cursor is.
    But with this you call restrictred procedures and their are not everywhere allowed ...
    If you execute a query on a block, may not all records getting retrieved from database.
    For this forms does not know, how many records are really in the block and
    for this there is no build-in like get_block_property ( records_count ).It does exist indeed. GET_BLOCK_PROPERTY('BLOCK',QUERY_HITS);
    Of course, this will return the number of records that would get fetched to the block (based on the where condition), but not the records with NEW status (i.e new records which are not yet committed).
    -Arun

  • How to find out the current workspace?

    Assume I have a couple of possible workspaces on my harddisc.
    Can I find out for a JDev installation which of them is currently used?
    Peter

    respect...
    you didn't explain yourself properly. I too wondered if you were writing a JDev extension which this is a common question that comes up. Use case is everything when it comes to helping people to understand what you are trying to achieve.
    If you hold your mouse over your application or project file icon in the application navigator it displays the full path of the current workspace/project.
    Brenden

  • How to find out the current index

    Hello Experts,
               How to find the current index and whatever we entered in that table how to ratrieved that entry value.pls give the suggest..

    Hi,
    To get current index write below piece of code in the outbound plug for your F4 help pop up.
    We have to write this in the outbound plug itself otherwise it will not work.
    let me know whethere it worked or not
    cl_chtmlb_config_utility=>outbound_plug_event_info( EXPORTING iv_event_string = lv_event_string
                                                          IMPORTING ev_index        = gv_index ).
    Regards,
    Swapna

  • How to find out the current VM Version?

    hi
    I want to find out with witch VM Version my java application runs.
    what methods or syntax do I need to get the VM Version as a return value.
    thanx in advance for the replies.

    Hi! Look at the docs for the getProperties() method in the java.lang.System class. It lists several properties related to the VM that you can retrieve at run time.
    Hope this helps!
    Cheers!

  • How to figure out the correct screen resolution?

    My 2 year old was playing with my iMac G5 and messed up the resolution setting. I have managed to restore it to something that looks okay, but am not certain what the optimum is. In System Preferences/Displays I have it set to 1600x1200 60Hz, which I suspect is more pixels than this 3.5 year old 17' iMac has. If I go to About this Mac/More Info... I see the iMac resolution says 1440x900 (this is not one of the choices in System Preferences/Displays) and the VGA Display says 1600x1200 @ 60 Hz which I wonder is for any external display or something and I believe just reflects what I have the Preferences set to. Any way to discover what the optimum resolution should be?

    I don't think you can choose more pixels than your machine has, or it wouldn't be a choice. I have always understood that the optimum resolution is the largest available as a choice in Display.

  • How to find out the image resolution in illustrator?

    How to find out the image resolution in illustrator cs through javascript or vbscript?
    Thanks,
    Prabudass

    Anyone please help me, how to find out the embedded image resolution in illustrator file through script.
    Thanks,
    Prabudass

  • How to find out the image size?

    How to find out the image size values(Width and height) in illustrator CS3 using any script. I tried but i got only the document height and width. I need to find out the image BoundingBox value of width and height. Kindly advice me.

    Try this.
    tell application "Adobe Illustrator"
    set heightImage to get height of raster item 1 of current layer of current document
    set widthImage to get width of raster item 1 of current layer of current document
    display dialog (heightImage & " X " & widthImage) as string
    end tell
    JaiMS

  • Does anyone have any idea how to find out the version of weblogic plugin

    Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
    I could not find version in plugin directory.
    it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
    Sun One 6.1 SP6
    Weblogic 9.2
    Solaris 5.10
    Edited by: 985608 on 01-feb-2013 8:20
    Edited by: 985608 on 04-feb-2013 6:25
    Edited by: 985608 on 04-feb-2013 6:27

    Hi,
    You can find version of weblogic plugin using below command.
    strings <plugin module file> | grep -i wlsplugins
    Mark if this helps.
    Regards,
    Kishore

  • How to find out the users currently logged into ODI

    Hi all,
    How to find out the users currently logged into ODI Work Repository?
    Thanks.

    Hi,
    It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
    Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
    I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
    Thanks,
    katukota

  • How to find out the user-exits?

    hi.
    how to find out the user-exits?
    regards
    eswar.

    Hi,
    *& Report  ZEXITFINDER
    *report  zexitfinder.
    *& Enter the transaction code that you want to search through in order
    *& to find which Standard SAP User Exits exists.
    *& Tables
    tables : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    *& Variables
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    *& Selection Screen Parameters
    selection-screen begin of block a01 with frame title text-001.
    selection-screen skip.
    parameters : p_tcode like tstc-tcode obligatory.
    selection-screen skip.
    selection-screen end of block a01.
    *& Start of main program
    start-of-selection.
    Validate Transaction Code
    select single * from tstc
    where tcode eq p_tcode.
    Find Repository Objects for transaction code
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    Find SAP Modifactions
    select * from tadir
    into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    Take the user to SMOD for the Exit that was selected.
    at line-selection.
    get cursor field field1.
    check field1(4) eq 'JTAB'.
    set parameter id 'MON' field sy-lisel+1(10).
    call transaction 'SMOD' and skip first screen.
    Regards

  • How to find out the selected column in Table Control

    Hi all,
          How to find out the selected column in Table Control?
    Thanks & Regards,
    YJR

    Hi,
    Let your table control name in Screen painter be TC1.
    READ TABLE TC1-COLS INTO WA_COLS (some wok area)
                 WITH KEY SELECTED = 'X'.
            IF SY-SUBRC = 0.
              CLEAR: W_DUMMY, W_COL_NAME.
              SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                                   W_COL_NAME.
            endif.
    W_COL_NAME gives you the column name.
    Hope it helps.
    cheers
    sharmistha

Maybe you are looking for