How to find out the features/available in a particular version
Hi
thanks in advance. I am a novice user. I am using oracle 8.1.7. How can I find out the commands/ features rellated to this version of SQL.
Hi Devmiral
Thanks for the links that are of great help. akadia.com is full of resources But I faced one problem as most of the analytical functions did not work on 8.1.7 like rank, dense_rank, running total etc etc
I have a celeron laptop with 256 MB of RAM and installed oracle 8i database. working on sql is comfortable, but can I install SQL 9.0.1 or higher on this laptop and operate at the same speed.
I do not want to install the whole of Oracle 9i or Oracle 10g, my objective is to practice all the 9i/10g features of SQL installing the minimum of SQL engine.
Is it possible, if possible then do let me know the methods or procedure.
Thanks
Similar Messages
-
How to find out the IBM XL C/C++ compiler Version in EBS
I have Referred the note
1294357.1 - New Oracle E-Business Suite R12 Operating System and Tools Requirements on IBM AIX on Power Systems
Please let me know the correct command to find out the IBM XL C/C++ compiler version in EBS
lslpp -l | grep vacpp
vacpp.cmp.rte 9.0.0.14 COMMITTED IBM XL C/C++ Compiler
vacpp.cmp.tools 9.0.0.14 COMMITTED IBM XL C/C++ Tools
vacpp.memdbg.aix52.rte 9.0.0.14 COMMITTED IBM XL C/C++ User Heap/Memory
vacpp.memdbg.rte 9.0.0.14 COMMITTED IBM XL C/C++ User Heap and
From the above command Compiler version is showing as 9.0.0.14 Is it correct command to check the IBM XL C/C++ compiler version?
(Or)
lslpp -l | grep -i xlC
xlC.aix61.rte 11.1.0.2 COMMITTED XL C/C++ Runtime for AIX 6.1
xlC.cpp 9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.rte 11.1.0.2 COMMITTED XL C/C++ Runtime
xlC.sup.aix50.rte 9.0.0.1 COMMITTED XL C/C++ Runtime for AIX 5.2
From the above command how will identify the IBM XL C/C++ compiler version?Hi Hussain
Thanks for the Reply
Yes i have reviewd the above note Just i want to know the command that im using to find out the the IBM XL C/C++ compiler Version
Below is the correct command ?We are planning to install new version of Complier 11 .
But im confused to find out the current Version in my system the below command shows 9.0.0.14 is IBM XL C/C++ Compiler is it the compiler version on my system?
lslpp -l | grep vacpp
vacpp.cmp.rte 9.0.0.14 COMMITTED IBM XL C/C++ Compiler
vacpp.cmp.tools 9.0.0.14 COMMITTED IBM XL C/C++ Tools
vacpp.memdbg.aix52.rte 9.0.0.14 COMMITTED IBM XL C/C++ User Heap/Memory
vacpp.memdbg.rte 9.0.0.14 COMMITTED IBM XL C/C++ User Heap and -
How to find out the set handler for a particular signal?
I have an interesting puzzle to solve. l'm investigating problems with someone else's code and I'd like to get the name of the handler that is set for SEGV. psig shows that the process catches SEGV, however I don't have access to the source code for all the libraries it links against and none of the source code I have sets a handler for SEGV. Is there a way to find out the name of the signal handler that is set for a particular signal in a process? I'm sure the source was compiled with cc -g. Solaris 8
Hello Haritha,
Please follow the path.
Go to RSA1 -> Metadata Repository ->DataStore Objects(ODS) -> Find you DSO(ODS) there and click on that, you will get all the details(Queries, Objects - Char, Key figures, update rules,etc..) related to that particular DSO(ODS), same is the case for Cube as well.
Please assign points. -
How to find out the packages created by a particular user.
Hi,
In a system which i am working.
I want the find the different packages that wer created by me.
How to find it out.
Regards,
ChandruHi Chandra
Goto SE21
Package Z* then Press F4.
Person Responsible: Your Login Name
OKAY . This will list all packages made by u.
Reward Points if useful
Regards
Akshay Chonkar -
How to find out the Queries Generated for a particular ods?
Hi all,
There are atleast 10 queries generated for a Particular ODs zyyyyy. I would like to know what are the queries generated for a particular ods.
I have used the where use list of the ods. But it did not displayed the queries generated for that ods.
I have looked at the bex query for that ods but cant find any query being generated on that ods??
Is there any way to find out what are the queries generated for a particular ods?
thanxs
harithaHello Haritha,
Please follow the path.
Go to RSA1 -> Metadata Repository ->DataStore Objects(ODS) -> Find you DSO(ODS) there and click on that, you will get all the details(Queries, Objects - Char, Key figures, update rules,etc..) related to that particular DSO(ODS), same is the case for Cube as well.
Please assign points. -
How to make use of SE37- Function Module & how to find out the table?
Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.SHi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute. -
How to find out the particular form available language?
hi ,
how to find out the particular form available language?
pls could u clirify the dought.
regards
eswarI guess you wrongly closed the thread without any answer.
utilities --> version, it will give all the list of languages of SAPScript.
Or goto SE71,
Press F4, in place of form name and goto unclassified forms, you will see all form names with available languages.
Regards,
Sairam -
How to find out the object is available or not in BC
Hi dear friends,
Suppose I want to design/create a Cube / ODS, before going to create that object, how to find out the same type of Object is available or not in BC with the specification which I want
Thanks in advanceHi Paul,
at least you need to know the application you are talking about. Then you can goto that particular area and evaluate the content (cubes, infoobjects, infosources, datasources). It will surely give you an idea of the fulfilment of your requirements by the content.
Siggi -
How to find out the locale setting in a browser?
In my Java web project, the multi-lingual issue on the JSP pages is handled by JSTL. It works fine so far for any input messages. However, some messages come from the container. It is needed to find out the browser's country and language settings inside of the container. My question is how to find out the settings?
Thanks in advance.
v.Hi, this I found on James' website--see http://www.rf.net/~james/perli18n.html#Q28
Q28. Can web servers automatically detect the language of the browser and display the correct localized page?
A28. Yes. HTTP/1.1 defines the details of how content negotiation works, including language content.
WWW browsers send an Accept-Language request header specifying which languages are preferred for responses. This technique works fairly well, although some versions of Netscape Navigator send an improperly formatted request parameter. Also, switching language preferences in either Navigator or IE 4 doesn't always "take" without first deleting a language hint.
Few sites do content-negotiation on language, and interestingly enough I do not know of any major portals doing this. One site that does is Sun's documentation library at SunDocs. Debian.org does a very nice job of using Apache content negotiation wih languages and also has some nice help info too on Setting the Default Language.
Apache's Content Negotiation features will select the right page to return, whether HTML or image file. Annoyingly, the match logic is very literal, so a browser request for en-us will not match a server entry of en except as a last resort. Any other exact match will win over en, even if en-us was first preference.
There are 2 ways of doing content negotiation with Apache: type or variant maps and multiviews.
Variant Maps
In httpd.conf, disable Options Multiviews if configured and add
AddType type-var var
DirectoryIndex index.var
Then create an index.var file like this:
URI: start; vary="type,language"
URI: index.html.en
Content-type: text/html
Content-language: en-GB
URI: index.html.en
Content-type: text/html
Content-language: en-US
URI: index.html.en
Content-type: text/html
Content-language: en
URI: index.html.fr
Content-type: text/html
Content-language: fr-CA
URI: index.html.fr
Content-type: text/html
Content-language: fr
URI: index.html.es
Content-type: text/html
Content-language: es
Multiviews
The multiviews technique works like this. This does add extra server load, as each content directory must be scanned for the variant document names.
index.html is localized into variant documents such as:
index.html.en (or index.en.html)
index.html.fr
index.html.es
index.html (or index.html.html as a reader has recommended) symlinked to one of the above as the last resort.
Here's an example of http.conf directives for this:
# in httpd.conf
AddLanguage en .en
AddLanguage fr .fr
AddLanguage es .es
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
LanguagePriority en es fr de pt
Options Multiviews
# end of httpd.conf fragment
Starting in Apache 1.2, you may also create documents with multiple language extensions.
O'Reilly's Apache - The Definitive Guide, Chapter 6
ApacheWeek article on Language Negotiation
Another ApacheWeek article on Language Negotiation -
How to find out the Target Component name and Target view name
Hi All Expert,
I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
Thanks in Advance....
Vishwas SahuHi Vishwa,
The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy. -
How to find out the node count?
How to find out the node count in illustrator document through programmatically. Kindly advice me.
Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith -
How to find out the idoc type required for our requirement
Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
PrasannaHi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A -
How to find out the description for the given field?
Hi All,
How to find out the description for the given field?
I mean ETTYP Desription is VTEXT. This we can find in TVEPT Table. So, How canwe find this?
Thanks in Advance
Sri...Hi Avi,
If i want to disply the fields like AUART and 'Description of AUART',
Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
my question is if i have given T184-AUART and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
Thanks in Advance
Sri... -
How to find out the infospoke name for an existing infoobject?
Hi,
Could any one pls tell me how to find out the existing infospoke name for an infoobject?
i've tried with where used list but its not coming....can any one pls suggest
Thanks,
SuriHi,
Check in metadata repository for that infoObject.
If you are still not able to identify, goto RSBO tx and press F4.
You will get the list of Infospokes available.
Go in each and chk from the General Tab, if the infoObject is available in the source system.
Regards,
Balaji V -
How to find out the destination of an "Adaptive RFC Model - DEPRECATED"
Hi All,
How to find out the destination of an "Adaptive RFC Model - DEPRECATED" of an running application
and Where is the destination created in the server .
I have got the code of the running project from NWDI .
Thanks in Advance
Regards
Piyas KumarHi,
I am not sure I fully understand the question, but as per the guide
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50f7192d-2808-2d10-189b-df3fa5f71abf
Excerpt from Page 7
Caveat Confector!1
ARFC1 destinations were created using the Web Dynpro Content Administrator tool. This tool is
still available for compatibility reasons, but the destinations it creates are not used by ARFC2
models!
Instead, you should use the u201CDestinationsu201D tool found on the Configuration Management screen of
the NetWeaver Administrator.
Therefore I think if you look up the application in the WD content Admin, there you can find out what kind of JCO/RFC connections are belonging to it. You can find it on http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
Browse your application here, and then select the JCO Connections tab on the right hand side.
I hope this helps.
Best Regards,
Ervin
Maybe you are looking for
-
Re-installing Snow Leopard Registration Question
Hello, Is there anyway to get Snow Leopard's setup assistant to recognize my account registration information when re-installing? I go through the installation process as normal but after I input my username and password information the Account
-
How can I print a document on my iphone to a printer if I do not have an air printer?
How can I print a document/photo etc that is one my iphone to a printer which I use with my Windows computers? My printer is a Lexmark X4550 Wi Fi
-
DVD Drive Problem HELP!!!
Hello all, I was recently going along my normal daily business with my MacBook, and I wanted to burn an iTunes song, so I put my blank disk in like normal and, Klonk, clonk, bzrttttt, BUZZZZZZZZ, Eject! This has never happened before! The noises are
-
R/3 - CRM Data Changes - Suggesions Plz
Dear Folks There seem to be some changes performed in SAP R/3 that changed employees in CRM so they have no names any more. Workaround to resolve ths issue is - in R/3 - to add a letter to the name of the employee and remove it again with saving in-b
-
Queries on Advance Complaint Management Integration with Advance Return Management
Hello All, We plan to implement Advance Complaint Management and integrate the same with Advance Return Management in SAP CRM, I have gone through the following links for the same http://help.sap.com/saphelp_crm700_ehp02/helpdata/en/f8/d9632674dc4934