How to find out the immediate parent for a material

I am Exploding a material by using CS_BOM_EXPL_MAT_V2. Now i am getting items for that perticular materil.
how can i find out parent material for a given Item material.
Please any one help me on this.
Thanks in advance
Venkat

Hi,
Refer to this thread.
FM to get all Parent material/BOM of the given material
Regards,
Vimal.

Similar Messages

How to find out the GR Numbers for which IR has not been done

Hi Sap Gurus,
Can anybody tell me how to find out the G R Numbers for which Invoice Receipt has not been done. Any TC or ant standard process to find out.
Thanks N Regards,
Siddhartha

Hi Siddarth,
Solution :
        1) Go to SE16 - Table Name : EKBE (PO History)
        2) Field - BUDAT (Posting Date)
        3) Transaction event Type:
                         - 1 (Only GR's )
                         - 2 (Both GR and IR)
        4) We can fetch both GR Numbers and also PO Numbers for which IR has not been done if transaction event - 1.
In addition to MB5S, you can try this also...

How to find out the infospoke name for an existing infoobject?

Hi,
Could any one pls tell me how to find out the existing infospoke name for an infoobject?
i've tried with where used list but its not coming....can any one pls suggest
Thanks,
Suri

Hi,
Check in metadata repository for that infoObject.
If you are still not able to identify, goto RSBO tx and press F4.
You will get the list of Infospokes available.
Go in each and chk from the General Tab, if the infoObject is available in the source system.
Regards,
Balaji V

How to find out the printer name for the Idoc

Hi guys
I want to find out the printer name for the Idoc,,some default printer is attached for one idoc,then how can we see the printer name for this idoc.
Regards
Madhoo

Hi,
For ALE/IDOC the medium will be either ALE or EDI but not printer.So it might be wrongly attached.As such there won't be any printer attached to idoc.
Regards,
Nagaraj

How to find out the best settings for BDT

Hi there.
I am trying to predict a movie rating. I downloaded datasets from IMDb, prepared them. A tried all of the regression algorithms, but the best result is giving Boosted Decision Tree. Now I am dealing with the best settings in this algorithm.
With default, running time was 69 seconds and the mean absolute error was 0.4844, which is quite much I think. So I tried to improve it by changing parameters of the BDT module. I tried to set Leaves per tree to 150 and than experimentaly find
remaining parameters. I've come to Samples per leaf=12, Learning rate=0.04 and
Number of trees=700. Running time was 78 seconds and mean absolute error was 0.4596.
Input of the algorithm is joined matrix with 14 columns (11 features) and 67672 rows splitted into 70:30 (training:testing).
Is there any way how to find out the best setting of Boosted Decision Tree?

Yordan's suggestion is correct, though the documentation is a bit outdated.
You can use the single parameter + sweeper mode or define your own custom ranges in the BDT module with the Parameter Range setting
Regards,
aK

How to find out the User Details for the particular transaction

Hi,
Actually AJAB -Asset Year closing was done by One User.How and Where to find out the User details who executed the Transaction.Kindly tell me the T-code for this.
Thanks
Sap Guru

Hi:
Please contact you basis administrator.Give him the T.code and date when Year closing was done. He may resolve your problem.
Please let me know if you need more information,
Assign points if useful.
Regards
MSReddy

How to find out the logout details for a perticular user .

Hi,
I have an requirement to write a report which will run for hourly basis. using this program i need to find out the logon & logout details so that i can calculate the total productive hour for a perticular user. using table usr41 i can find out the logon detail. but i need to know the logout detail also to calculate the productive hour.
pls suggest.

Hi,
Check these below threads:
user log in & log out time SAO
How to find user log-out time ?
Regards,
Nitin

How to find out the Area Menu for a Report/ Table/Function Module

Hi,
Is there any procedure to find out the <b>"AREA MEANU"</b> for a Report/Table/Function Module...
Or is there any Transaction code / Report is available to find out all the report for a particular "AREA MENU".
Thank you for your quick response...
Regards,
Thiru
<b></b>

Hi,
Check these below threads:
user log in & log out time SAO
How to find user log-out time ?
Regards,
Nitin

How to find out the set handler for a particular signal?

I have an interesting puzzle to solve. l'm investigating problems with someone else's code and I'd like to get the name of the handler that is set for SEGV. psig shows that the process catches SEGV, however I don't have access to the source code for all the libraries it links against and none of the source code I have sets a handler for SEGV. Is there a way to find out the name of the signal handler that is set for a particular signal in a process? I'm sure the source was compiled with cc -g. Solaris 8

Hello Haritha,
Please follow the path.
Go to RSA1 -> Metadata Repository ->DataStore Objects(ODS) -> Find you DSO(ODS) there and click on that, you will get all the details(Queries, Objects - Char, Key figures, update rules,etc..) related to that particular DSO(ODS), same is the case for Cube as well.
Please assign points.

How to find out the table, data for the IDOCS is pulled from?

HI
The ZFPH9999397 VENDOR FEED job runs the RBDMIDOC program with the variant Z9999_397. This creates IDOCS that are sent out and eventually wind up in IMOS.
The IDOC Type is CREMAS.
Can you tell me which table or tables the data for these IDOCS is pulled from?
Or tell me the procedure to find out the table name.
Thanks,
das.
Edited by: sathish dasari on Dec 10, 2009 11:54 AM

You can use Transp. Table      TBD62 .
enter Message Type                      CREMAS
you will get the list of tables and the fields from which data is pulled based on the change pointers in Transp. Table      BDCP.

How to find out the process count for a database during a particular window

Hi Team,
I want to find out the maximum process count reached for a database for an interval. Say between 1:00 to 2:00 AM IST. Please help
Database version:11.2.0.2
OS:AIX 6.1

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

How to find out the ASCII Values for Spanish character

Hi,
I had an requirement to store Spanish character and also need to fileter the records based on the Spanish character.
Kindly guide me for below.
To filter the Records which contains spanish characters?
To get the ASCII Values for the particular column?
E.g. we can find out the ASCII value of 'a' by using the syntax select ASCII('a') from dual.
But I want to find the ASCII Values for the particular column value. Ie. name.
E.g., Client name is "Suresh", I want to the ASCII Values for entire name of "Suresh".
Kindly do the needful help / Guidance on this.
Thanks,
Orahar

To expand on what I said in my first post, you want to do something along these lines:
with t (thename) as
select 'Suresh' from dual
select thename
     , substr(TheName, level, 1)
     , ascii(substr(thename, level))
from t
connect by level <= length(thename);The output of the above query is:
THENAM S ASCII(SUBSTR(THENAME,LEVEL))
Suresh S                           83
Suresh u                          117
Suresh r                          114
Suresh e                          101
Suresh s                          115
Suresh h                          104
6 rows selected.Note that the WITH statement is only there to simulate a table for this example. With a table, all you do is get rid of the with and substitute the name "t" for the name of your table (also the name of the column to whatever name the column has in your table).
Lastly, I suggest you post your question along with, an example table and the output you'd like to get in the PL/SQL forum. There are people there that will give you all kinds of great ways of solving that problem.
HTH,
John.

How to find out the roles set for the current session?

Hi,
I wanted to find out the roles set to the current session. Which system view or table gives this info?
Thanks
Seshu

SELECT * FROM session_roles

How to find out the WPS PIN for WD100

HI, I just purchased the WD100-SL-DE, it is good but when I get it to connect to my windows8.1, there is a step to input the WPS PIN, I am not sure what the PIN is and how I can find it. Thanks in advance for the help.

Hello to all the posters.
     First, I'd like to state that I don't have the WD100. I made a mistake in another post, and gave the poster information on using WiDi. Still, the setup should be the same motif, regarding the PIN.
     I think your problem is that the PIN should appear on your TV, by the time the software requests the PIN. You must have the TV adapter connected to the HDMI port, and that HDMI input selected on the TV, before running the program.
Try this:
1. Turn on the TV
2. Plug the adapter HDMI output, into an available HDMI input on the TV.
3. Select that HDMI port on your TV.
4. Turn on the adapter, and wait for it to completely power up/boot.
5. Re-run the WD100 setup, or the install program.
6. Watch the TV screen for the PIN. The TV needs to be paired (authenticated) with your machine's program, before the screen will duplicate.
     Some newer TV's do not need the adapter, so I don't know how these actually work. Search your TV's manual for how to accept these type of connections.
     As I've said, I don't own the WD100, and there isn't any info out on the net about setting it up. Was there any setup information included with your purchase? I'm basing my information about setting up the PIN, on what was required when I set up my WiDi. My PC did not need any USB dongle to use the WiDi. I only downloaded the latest drivers for Intel, and bought a Belkin Screencast adapter for my TV, then ran the WiDi setup. Also, once connected to the adapter, it should do an automatic firmware download. So wait until all the programs to load, before disconnecting.
Edit: Under Win 8/8.1 you may need to either share, or click the device share, before the PIN can be displayed on your TV, when you get to the screen to input the PIN in the program.
     Let me know how it goes.
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

How to find out the Queries Generated for a particular ods?

Hi all,
There are atleast 10 queries generated for a Particular ODs zyyyyy. I would like to know what are the queries generated for a particular ods.
I have used the where use list of the ods. But it did not displayed the queries generated for that ods.
I have looked at the bex query for that ods but cant find any query being generated on that ods??
Is there any way to find out what are the queries generated for a particular ods?
thanxs
haritha

Hello Haritha,
Please follow the path.
Go to RSA1 -> Metadata Repository ->DataStore Objects(ODS) -> Find you DSO(ODS) there and click on that, you will get all the details(Queries, Objects - Char, Key figures, update rules,etc..) related to that particular DSO(ODS), same is the case for Cube as well.
Please assign points.

How to find out the immediate parent for a material

Similar Messages

Maybe you are looking for