How to find out the manditary fields in an IDOC
Hi,
How to find out the manditary fields in an IDOC.
For example MATMAS05 .
For this 2 segments I want to find out the manditary fields.
E1MARA
E1MAKTM
Hi,
go to transaction WE30 and give the corresponding IDoc type and enter. Then you will get all segments for that IDoc type then double click on segment. A popup box will come in that it will show a check box whether it is a mandatory segment or not. And segment editor button will give all the field details.
Regards
Similar Messages
-
How to find out the Trigeering program of an IDOC
How to find out the Trigeering program of an IDOC ?
Thank Usse the FUnction module ..MASTER_IDOC_DISTRIBUTE..if it is used zreport or program
that means the message type used in the program are manually triggered.
Prabhudas -
How to find out the common fields
Hi all
I want to pull out data from the following tables
OPCH,PCH1,OCRD,OVPM
Vendor Name OPCH
GL Date PCH1
Bill No PCH1
Bill Date PCH1
Due Date PCH1
Bill Amount OPCH
TDS PCH1
Advance Adjusted OPCH
Total Due OPCH
Amount Paid OVPM
Mode of payment OCRD
Cheque/EFT No OVPM
How do i know which are the common fields ?
Regards
FarheenHi,
Are you looking for query like this :
select t0.cardname as 'Vendor Name',
t0.docnum as 'Bill Number', t1.docdate as 'Bill Date',
t0.docduedate as 'Due Date',
t0.doctotal as 'Bill Amount', t4.WTAmnt as 'TDS Amount',
t0.dpmAppl as 'Advance Adjusted', (t0.doctotal - t0.paidtodate) as 'Total Balance Due',
t3.sumapplied as 'Amount Paid', t5.checknum as 'Cheque No.'
from OPCH t0
inner join PCH1 t1 on t0.docentry = t1.docentry
left join PCH5 t4 on t4.absentry = t0.docentry
left join OCRD t2 on t0.cardcode = t2.cardcode
left join VPM2 t3 on t0.transid = t3.doctransid
left join VPM1 t5 on t5.docnum = t3.docnum
Kind Regards,
Jitin
SAP Business One Forum Team -
How to find out the structure stored field value in a standard program
Hi Gurus,
Please suggest me how to find out the structure field stores the value in which table.
Exanple : i have a strutured field in T.code cj31 is BPDY-WERT1 and it is stotring value 10,000,000.00. know i need to find out in which table this value is storing .
Please suggest me its urgent.
Thanks in Adavance!!!
Points will be rewarded.......
Regards,
Kranthihi,
Go to transaction ST05,Click activate trace with filter,Give the transactio name as cj31,Go to the transaction and navigate to the place where the particular field is present, then again go to st05 ,Deactivate the trace and display the trace.
Now u can see how the data is fetched ,U can even go to display mode of the same transaction cj33
Thanks
San -
How to find out the user who has created a new field in the custom table.
How to find out the user details who has created a new field in the custom table.
Thanks,
JoanHi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
How to find out the description for the given field?
Hi All,
How to find out the description for the given field?
I mean ETTYP Desription is VTEXT. This we can find in TVEPT Table. So, How canwe find this?
Thanks in Advance
Sri...Hi Avi,
If i want to disply the fields like AUART and 'Description of AUART',
Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
my question is if i have given T184-AUART and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
Thanks in Advance
Sri... -
Hi,
I am trying to find out the latest delivery date(EINDT) for each purchasing document (EBELN) through graphical way.
The view contains other fields apart from the above mentioned two fields.
When only the two fields (EBELN, EINDT) are there, then in semantics, I can select 'Max' as aggregation to get the maximum value for each document.
If I do like this, then I need to join more than 3 views and also so many joins in calculation view. Taking so much time for data preview.
Hence , please help me in getting the solution while the view contains other fields also.
Thanks in advance.
Thanks,
JyothirmayiHi Sreehari/Vinoth,
Thank you for your replies.
if only two fields are then I can get the max/min values of one field corresponding to other field.
But more than two fields are there with different values, then let me know how to find out the max/min value of a particular filed corresponding to the 2nd field with other fields also should be in the output.
I hope you understood my issue.Please revert in case of questions.
Thanks & Regards,
Jyothirmayi -
How to find out the user-exits?
hi.
how to find out the user-exits?
regards
eswar.Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards -
How to find out the Transactions used per month & the USER who used that
Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
layout TYPE slis_layout_alv,
variant TYPE disvariant,
events TYPE slis_t_event WITH HEADER LINE,
heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
wa_usertcode TYPE swncaggusertcode,
wa TYPE zusertcode,
t_ut TYPE STANDARD TABLE OF zusertcode,
wa_result TYPE zusertcode,
t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
EXPORTING
component = 'TOTAL'
ASSIGNDSYS = 'DEV'
periodtype = 'M'
periodstrt = month
TABLES
usertcode = t_usertcode
EXCEPTIONS
no_data_found = 1
OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
wa-user = wa_usertcode-account.
IF wa_usertcode-entry_id+72 = 'T'.
wa-tcode = wa_usertcode-entry_id.
wa-report = space.
ELSE.
wa-tcode = space.
wa-report = wa_usertcode-entry_id.
ENDIF.
COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
is_layout = layout
it_fieldcat = fcat[]
i_save = 'A'
is_variant = variant
it_events = events[]
TABLES
t_outtab = t_ut
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA -
How to find out the tables from extract structures
Hi All,
As I know my data sources are 2lis_04_p_matnr,2lis_04_p_comp,2lis_04_p_arbpl.
How to find out the tables concerned with the fields in the extract structure.
ThanksPl check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
OR navigate to: help.sap.com - netweaver - bi content - supply chain - look for your application area and the extractor and you will see the source tables and fields.
Ravi Thothadri -
How to find out the table name
hi,
how to find out the table name in which the data from a particular structure in a particular screen is saved,
please tell me the procedure to find out the table name for saving the structure data that is inputted at runtime.
Thanks,
chinnuHi Chinnu,
Below are the tables that are referred to find out the table names
DD02L Table contains the SAP Tables.
DD02T Table contains the SAP Table Texts.
DD01L Table contains the Domains
DD01T Table contains the Domain Texts.
DD03L Table contains the Table Fields.
DD03T Table contains the Table Field Texts. (Language Dependent)
DD04L Table contains the Data Elements.
DD04T Table contains the Data Element Texts.
DD05s Table contains the Foreign Key Fields
last words with L and T only. L->Database Fetch T-> Text
And the procedure to retrive the table name is as follows
1. Go to se11
2. Enter table name DD03T and execute
3. In the next screen you can find Tables, fields, test etc. there you can enter the field name in the fields
and execute.
4. you can get all tables which contains the field.
I hope this will solve your problem
Regards,
Chandru -
How to find out the Target Component name and Target view name
Hi All Expert,
I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
Thanks in Advance....
Vishwas SahuHi Vishwa,
The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy. -
How to find out the exact culpirit session
How to find out the exact culpirit client machine process to kill the session and release.
Thanks,We can not directly solve this mystery, only you can do so.
V$SESSION contains data for all connected sessions.
If no unique combination of fields exists that allows you to identify the culprit client session, then you are out of luck.
See you started this thread with the premise that 1 session connected to the DB is a problem.
OK, we will accept this as being true.
Now via SQL how/what can you SELECT so that only 1 row is returned & that row corresponds to "problem client" session?
Since this is YOUR system & not ours, only you can solve this mystery. -
How to find out the tables that will be affected using a transaction
Hi,
How to find out the list of database tables that will be affected when we use a standard transaction(ex. VA01, MM01..)...?(like When we create a salesorder, which tables and which fields will be affected..?)
Is there any transaction or a simple way to find out the solution?
Thanks,
Pradeep.Hi,
Give transaction code and in menu(system- status), double click onthe Program name.
Check in TOP INCLUDE - you will find all the tables related to that transaction.
Thanks,
Anitha -
Transaction IW32.How to find out the person name.(Last changed By)
Hi all,
When i executed the transaction IW32.Its displays changed by and created by fields. please any body can tell me how to find out the person name who had made last change with respect to the field changed by.
Please tell me the table and field name for the field last changed by......
Regards,
Munna.hi,
check the table AUFK field AENAM for the order number(AUFNR) in IW32..........
Maybe you are looking for
-
Display burn in - Apple does not want to replace the LCD
Recently my iMac 24” LCD display began to have “screen burn ins“ or image persistence on the LCD. I have done extensive online research about the issue, I tried setting my screensaver to pure white and running the apple screensaver to resolve the iss
-
Some of the attachments were only a couple of typed pages. I saved them as pdf format so receiver could read. The pdf file would not attach. Program gave message file to large for attachment to e-mail. Perhaps I am not doing correct procedure to
-
Change status of PO created from Bid response
Hi, Can anyone let me know - which BADI or IMG Setting can be used to change the PO status to customized user status while creating Purchase Order from Bid Response accepted from a vendor ? Regards, Rajeshree
-
How do you created object level security in BI for roles.
How do you created object level security in BI for roles. For example if I want users to only execute reports in BI for a particular "object" report how would I do that. Thanks.
-
Transfering photos from ipod to computer?
Hello! i used to sync my photos in ipod with my computer. But my computer crashed and i had to change a new computer. Then, i realised that i can't transfer the photos that are already in my ipod to my new computer. The photos in ipod are in a file f