How to find out the missing records
Dear all,
I feel that there is some Inconsistent records between R/3 and the extracted records BI for the data source 2LIS_03_BF. some of the records may not be updated through delta.. Is this possible? as we have created Zkey figures to capture the diffrent unit of measure's quantity from the table MSEGO2 and updated to IC_c03 cube.
Can any one tell me how to go about the missed records..where to find them.. and how to extract them.
Poits will be assigned
Regards
venu
hi,
inventory scenario is difficult to handle as this have non cumulative key figures which can be viewed at the repors.
extreme care is required while compression and intila loads and their compression.
run the report or ask the user to run the report and sort out the missing records.
chk out the document and chk if the procedure done by you is correct.
inventory management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Ramesh
Similar Messages
-
Hi ,
How to find out the latest Record in per_all_people_f and per_all_assignments_f
Requirement : Need to find out the latest record in per_all_people_f and per_all_assignments_f to update the attribute column with pre defined value . Its not possible to track only with person_id / assignment_id and effective end date
SELECT pp_id
FROM (SELECT app.person_id pp_id,
asf.*
FROM apps.per_all_people_f app,
apps.per_all_assignments_f asf
WHERE --app.person_id=123568 and
asf.person_id = app.person_id AND
app.effective_end_date = to_date('31-dec-4712') AND
asf.effective_end_date = to_date('31-dec-4712')
GROUP BY app.person_id)
HAVING COUNT(pp_id) > 1
GROUP BY pp_id
This query also returns more than 1 value for person_id .
It would be great if you put comment on this .. Thanks in advance ,
AryaI am getting more records with asf.primary_flag='Y' . If you give ur mail id , i will send the sample data
ASSIGNMENT_ID EFFECTIVE_START_DATE EFFECTIVE_END_DATE BUSINESS_GROUP_ID RECRUITER_ID GRADE_ID POSITION_ID JOB_ID ASSIGNMENT_STATUS_TYPE_ID PAYROLL_ID LOCATION_ID PERSON_REFERRED_BY_ID SUPERVISOR_ID SPECIAL_CEILING_STEP_ID PERSON_ID RECRUITMENT_ACTIVITY_ID SOURCE_ORGANIZATION_ID ORGANIZATION_ID PEOPLE_GROUP_ID SOFT_CODING_KEYFLEX_ID VACANCY_ID PAY_BASIS_ID ASSIGNMENT_SEQUENCE ASSIGNMENT_TYPE PRIMARY_FLAG APPLICATION_ID ASSIGNMENT_NUMBER CHANGE_REASON COMMENT_ID DATE_PROBATION_END DEFAULT_CODE_COMB_ID EMPLOYMENT_CATEGORY FREQUENCY INTERNAL_ADDRESS_LINE MANAGER_FLAG NORMAL_HOURS PERF_REVIEW_PERIOD PERF_REVIEW_PERIOD_FREQUENCY PERIOD_OF_SERVICE_ID PROBATION_PERIOD PROBATION_UNIT SAL_REVIEW_PERIOD SAL_REVIEW_PERIOD_FREQUENCY SET_OF_BOOKS_ID SOURCE_TYPE TIME_NORMAL_FINISH TIME_NORMAL_START BARGAINING_UNIT_CODE LABOUR_UNION_MEMBER_FLAG HOURLY_SALARIED_CODE REQUEST_ID PROGRAM_APPLICATION_ID PROGRAM_ID PROGRAM_UPDATE_DATE ASS_ATTRIBUTE_CATEGORY ASS_ATTRIBUTE1 ASS_ATTRIBUTE2 ASS_ATTRIBUTE3 ASS_ATTRIBUTE4 ASS_ATTRIBUTE5 ASS_ATTRIBUTE6 ASS_ATTRIBUTE7 ASS_ATTRIBUTE8 ASS_ATTRIBUTE9 ASS_ATTRIBUTE10 ASS_ATTRIBUTE11 ASS_ATTRIBUTE12 ASS_ATTRIBUTE13 ASS_ATTRIBUTE14 ASS_ATTRIBUTE15 ASS_ATTRIBUTE16 ASS_ATTRIBUTE17 ASS_ATTRIBUTE18 ASS_ATTRIBUTE19 ASS_ATTRIBUTE20 ASS_ATTRIBUTE21 ASS_ATTRIBUTE22 ASS_ATTRIBUTE23 ASS_ATTRIBUTE24 ASS_ATTRIBUTE25 ASS_ATTRIBUTE26 ASS_ATTRIBUTE27 ASS_ATTRIBUTE28 ASS_ATTRIBUTE29 ASS_ATTRIBUTE30 LAST_UPDATE_DATE LAST_UPDATED_BY LAST_UPDATE_LOGIN CREATED_BY CREATION_DATE TITLE OBJECT_VERSION_NUMBER
931510 7-Nov-08 31-Dec-12 122 (null) (null) (null) 3978 1 (null) 14402 (null) 220150 (null) 734956 (null) (null) 476 (null) (null) (null) (null) 2 E Y (null) 100035417-2 (null) (null) (null) 45948739 (null) (null) (null) (null) (null) (null) (null) 868007 (null) (null) (null) (null) 449 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null)
797386 26-Aug-08 26-Aug-08 122 (null) (null) (null) 3980 3 (null) 14402 (null) 218925 (null) 734956 (null) (null) 476 (null) (null) (null) (null) 1 E Y (null) 100035417 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) 740071 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null)
916076 26-Aug-08 31-Dec-12 122 (null) (null) (null) 3980 1 4 14402 (null) 218925 (null) 734956 (null) (null) 476 (null) (null) (null) (null) 1 B Y (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null)
797386 25-Feb-08 25-Aug-08 122 (null) (null) (null) 3980 1 (null) 14402 (null) 218925 (null) 734956 (null) (null) 476 (null) (null) (null) (null) 1 E Y (null) 100035417 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) 740071 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) -
How to find out the duplicated records?
Hi,
I am writing a report by using Oracle6i and window 98. I have a 3 fields in the report: LAST_NAME, FIRST_NAME, ADDRESS.
In the reports, I only want to show those records that have the same last_name and first_name but different address.
Can anyone help? Thanks.
JunHi Jun
I used the following query in the sample employees table to select those employees whose first name was the same but employee_id was different. Probably you could try this query by substituting your field names and table name:
select distinct e1.employee_id, e1.first_name from employees e1, employees e2 where e1.first_name=e2.first_name and e1.employee_id<>e2.employee_id order by e1.first_name asc;
Here is a sample snapshot of the result:
EMPLOYEE_ID FIRST_NAME
103 Alexander
115 Alexander
105 David
151 David
165 David
127 James
131 James
Navneet. -
How to find out the account group information in customer master record?
how to find out the account group information in customer master record?
in which tab? thanks in advanceHi
Go to XD02 and select the Extras from the main menu , you will find Account group info -> click on the No.ranges.
reward if it helps
SR -
How to find out the n number of records inserted??
In File to JDBC Scenarios, i am inserting n records in Oracle.
How to find out the n number of records inserted??Hi,
If you are using the statement "UPDATE_INSERT", get the response on element <insert_count>count</insert_count>. It will give you the inserted rows.
This link can be very helpfull.
[http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm]
regards.
roberti -
Find out the Condition record deletion
Please help me anybody below issue.
My issue is how to find out the Log " deletion of condition record".
i need which user has been deleted the condition record. Please help me this how to find it. I checked in Standard we didn't able to find out..condition tables have usually no change log, as most of them are created by yourself anyway.
If you missed to activate the log for table changes (via SE11, enter condition table, click change, goto technical settings and find the box for activation of change log ) then you will not find anything.
Check how this setting is for your condition tables and revert back -
HOW to find out the tablespace space utilized by a patch after applying the
someone has already applied the patch in test env before recording the tablespace size , so I cannot find out the figure in test env.
So is there any general practice or general guidelines on it?
hOW to find out the tablespace space utilized by a patch after applying the patch?
Thanks & Regards,
Sree.
Edited by: 846579 on Mar 22, 2011 10:50 PMI think there is no direct way to determine what tablespace is utilized by a patch from the README file. You could check the content of the patch file and see what modules are affected (assuming there are changes and the database level), then query DBA_USERS (DEFAULT_TABLESPACE column) for those schemas which are updated by a patch. Or, you could check the size of the tablespaces before and after applying the patch and you will determine what tablespaces have been utilized (provided that the application services are down, and none of the application users is connected to the application).
Thanks,
Hussein -
How to find out the Hire date of an employee?
Hi All
What is effective date, Latest start date and other date fields which are are used when we create a new employee?
What is the difference between hire date and joining date?
How to find out the Hire date and joining date of an employee?
Regards
RahmanThe effective dates are related to date tracking. The effective start date shows when this version of the record became effective.
The Hire Date, or Latest Satrt Date shows the date on which the employee was last hired. If he was hired before from 01/01/01 to 31/12/01, then left but was hired again from 01/01/07, the Latest Hired Date would be 01/01/07 and the First Hired Date would be 01/01/01.
When using Oracle HR, datetracking allows you to either correct data (because it was wrong or incomplete), or update it (because a time effective change took place e.g. got married).
The[b] effective dates show when a record was updated. So, if an update was made on 07/02/07, and the update datetrack option was used, the current record would have its effective end date set to 06/02/07 (the day before the update) and a new version would be created with the updates and an effective start date of 07/02/07.
Hope this helps. -
In DBI , how to find out the Source Query used for the Report
Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj ShrivastavaHi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu -
How to find out the total, subtotal in alv report
hi dears,
how to find out the total, subtotal in alv report?
pls tell me logic ,
i will be waiting for eply
regards
eswarHi,
<b>ALV Grid List with sub-totals</b>
REPORT z_demo_alv_sort.
* This program lists orders (VBAK) with sort and sub-total for *
* 'sold-to-party' (KUNNR) and 'Sales organization' (VKORG) *
TABLES : vbak.
TYPE-POOLS: slis. " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
vkorg LIKE vbak-vkorg, " Sales organization
kunnr LIKE vbak-kunnr, " Sold-to party
vbeln LIKE vbak-vbeln, " Sales document
netwr LIKE vbak-netwr, " Net Value of the Sales Order
waerk LIKE vbak-waerk, " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
* Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
FROM vbak
UP TO p_max ROWS
WHERE kunnr IN s_kunnr
AND vbeln IN s_vbeln
AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
* Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-do_sum = &2.
ls_fieldcat-cfieldname = &3.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
add 1 to ls_sort-spos.
ls_sort-fieldname = &1.
ls_sort-up = 'X'.
ls_sort-subtot = &2.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
TABLES
t_outtab = gt_vbak.
ENDFORM. " F_DISPLAY_DATA
***************** END OF PROGRAM Z_DEMO_ALV_SORT **********************
Regards
Sudheer -
How to find out the standard info stucture for a customized IS in LIS
Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
SaddyHi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy -
How to find out the Sales order no based on spool no
Hi Experts,
Anyone tell me how to find out the Sales order no based on Spool no.
Thanks and regards,
AmjadHello Mohammed,
Please check the following SAP Spool tables for your spool request.
You will find your required document number as an Object key in these tables.
TSCMSTAT --> Field OBJNO
SOOS --> Field APPLKEY (Document number will be a part of this key)
If your document is getting printed by SAP Script, then dont forget to take SCR value in the OBJTP field while searching for your record.
Thanks and Best Regards,
Vikas Bittera.
***Points for Usefull answers *** -
How to find out the user-exits?
hi.
how to find out the user-exits?
regards
eswar.Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards -
How to find out the Transactions used per month & the USER who used that
Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
layout TYPE slis_layout_alv,
variant TYPE disvariant,
events TYPE slis_t_event WITH HEADER LINE,
heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
wa_usertcode TYPE swncaggusertcode,
wa TYPE zusertcode,
t_ut TYPE STANDARD TABLE OF zusertcode,
wa_result TYPE zusertcode,
t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
EXPORTING
component = 'TOTAL'
ASSIGNDSYS = 'DEV'
periodtype = 'M'
periodstrt = month
TABLES
usertcode = t_usertcode
EXCEPTIONS
no_data_found = 1
OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
wa-user = wa_usertcode-account.
IF wa_usertcode-entry_id+72 = 'T'.
wa-tcode = wa_usertcode-entry_id.
wa-report = space.
ELSE.
wa-tcode = space.
wa-report = wa_usertcode-entry_id.
ENDIF.
COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
is_layout = layout
it_fieldcat = fcat[]
i_save = 'A'
is_variant = variant
it_events = events[]
TABLES
t_outtab = t_ut
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA -
How to find out the person who did a transport.
How to find out the person who did a transport.
There are 3 basis admins in our Org.
so is there a way of tracing out , who did what transport.
Regards,- Goto import Overview (STMS)
- Import Queue
- Select DEV req (goto Import History)
- Edit - Display More
It will show the user who did the transport
Rgds
Maybe you are looking for
-
Performance of the J2EE server for BI 70
Hi We currently are running BI 70 on as 20GB(memory in *BASE), 1.5 CPU (power 6) system. We have close to 100 users on the system and primarliy use the excel based Bex analyzer for reporting, We want to start using the BI-Java stack for web based rep
-
How to handle user preference which has "_" and " " in the name
Hi Experts, I have a question how to handle value which has like "_" and "space" etc in user preference. If setting "a_b-c d", I could not retrieve this because it's escaped in database. So this code can't get value even though I can set it. Is there
-
Hi all , I am getting this error every time i try to make a new instance of BPEL process using java API . The error is thrown on when I do a post using "deliveryService.post("UserTaskSample", "4.0", "initiate", nm);" An exception has occured : java.l
-
13 inch Macbook Pro External Display Issues (Fully up to date as of 28th of June)
Hi, Basically I 've got a 13" MacBook Pro which I've been trying to get working with a 20" Samsung SyncMaster 2033HD Monitor using the Displayport/Thunderbolt Port to VGA adapter. I've applied every update even the newest ThunderBolt firmware update
-
Support for PHP 4 to be discontinued - implications for Dreamweaver
Today (13 July 2007) is the third anniversary of the release of PHP 5. To mark this occasion, the PHP development team has announced that support for PHP 4, except for critical security fixes, will be discontinued on 31 December. Furthermore, even cr