How to find out the particular form available language?

hi ,
how to find out the particular form available language?
pls could u clirify the dought.
regards
eswar

I guess you wrongly closed the thread without any answer.
utilities --> version, it will give all the list of languages of SAPScript.
Or goto SE71,
Press F4, in place of form name and goto unclassified forms, you will see all form names with available languages.
Regards,
Sairam

Similar Messages

How to find out the object is available or not in BC

Hi dear friends,
Suppose I want to design/create a Cube / ODS, before going to create that object, how to find out the same type of Object is available or not in BC with the specification which I want
Thanks in advance

Hi Paul,
at least you need to know the application you are talking about. Then you can goto that particular area and evaluate the content (cubes, infoobjects, infosources, datasources). It will surely give you an idea of the fulfilment of your requirements by the content.
Siggi

How to find out the current form name

Hi all,
I have to pass the current sapcript form name in the sauroutine pool for some further processing.
I just wanted to is there any variable, method, or way to find out the current/running Sapscript form name generically so that we can pass it on to subpool.
Looking forward for your reply.
Regards,
Anuja.

Hi All,
Many thnaks for your replies.
Actually in my case the situation is, i have to change in multiple forms.
I mean the same perform needs to be used in all the forms almost around 20 using the current form name.
So that perform should be generic. I mean is there any variable/ method or way to get the current form name so that we can pass that to the subroutine pool through form.
Looking forward for yoour reply.
Regards,
Anuja.

How to find out the idoc type required for our requirement

Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
Prasanna

Hi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A

How to find out the cost of SAP user for a particular user id

Dear All,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
Raghu

Hello Raghu,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
I think you need to reach out to BASIS consultant to check out the Cost involved for User ID for the SAP application.
Regards,
Sarthak

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
 fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
 layout TYPE slis_layout_alv,
 variant TYPE disvariant,
 events TYPE slis_t_event WITH HEADER LINE,
 heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
 wa_usertcode TYPE swncaggusertcode,
 wa TYPE zusertcode,
 t_ut TYPE STANDARD TABLE OF zusertcode,
 wa_result TYPE zusertcode,
 t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
 EXPORTING
 component = 'TOTAL'
 ASSIGNDSYS = 'DEV'
 periodtype = 'M'
 periodstrt = month
 TABLES
 usertcode = t_usertcode
 EXCEPTIONS
 no_data_found = 1
 OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
 wa-user = wa_usertcode-account.
 IF wa_usertcode-entry_id+72 = 'T'.
 wa-tcode = wa_usertcode-entry_id.
 wa-report = space.
 ELSE.
 wa-tcode = space.
 wa-report = wa_usertcode-entry_id.
 ENDIF.
 COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
 text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
 text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
 text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
 text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
 text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-cprog
 is_layout = layout
 it_fieldcat = fcat[]
 i_save = 'A'
 is_variant = variant
 it_events = events[]
 TABLES
 t_outtab = t_ut
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA

How to find out that particular structure is used in which tables

Hello Friends,
Most of the times through techinal information we come to know the table name for a particular field.And in se16 when i give that table name than system says its structure and not the table.So in se11 when i give that structure name in database table field, its shows all the field in that structure, but not the data stored in that field.
So my question is how to find out that particular structure is used in which tables,so that i can view data stored in that structure?
Thanking you guys in advance.
Regards,
Jitendra

Dear,
When you click on the technical information it will give the structure name and field, double click on the structure and it will take you the display structure screen, there you will have the where-used List icon (Ctrl + Shift + F3) at the top , click on that and it will show the options, select Database tables and execute, it will give the tables related to the structure, you can explore the list of tables and find where your required field is stored in them.
Thanks & Regards,
Vijaya Bhaskar A

How to find out the table name

hi,
how to find out the table name in which the data from a particular structure in a particular screen is saved,
please tell me the procedure to find out the table name for saving the structure data that is inputted at runtime.
Thanks,
chinnu

Hi Chinnu,
Below are the tables that are referred to find out the table names
DD02L Table contains the SAP Tables.
DD02T Table contains the SAP Table Texts.
DD01L Table contains the Domains
DD01T Table contains the Domain Texts.
DD03L Table contains the Table Fields.
DD03T Table contains the Table Field Texts. (Language Dependent)
DD04L Table contains the Data Elements.
DD04T Table contains the Data Element Texts.
DD05s Table contains the Foreign Key Fields
last words with L and T only. L->Database Fetch T-> Text
And the procedure to retrive the table name is as follows
1. Go to se11
2. Enter table name DD03T and execute
3. In the next screen you can find Tables, fields, test etc. there you can enter the field name in the fields
and execute.
4. you can get all tables which contains the field.
I hope this will solve your problem
Regards,
Chandru

How to find out the Target Component name and Target view name

Hi All Expert,
                  I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
Thanks in Advance....
Vishwas Sahu

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

How to find out the node count?

How to find out the node count in illustrator document through programmatically. Kindly advice me.

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

How to find out the standard smartforms?

how to find out the standard smartforms?

Hi Sunil
You just go to transaction SE80(Object Navigator)
and in that enter Package BC470
which contains the standard Programs on Smart forms ,
I think there you can find some Smart forms in those programs.
I hope it will help you.
If it helps reward with points.
Regards Rk

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

How to find out the structure stored field value in a standard program

Hi Gurus,
Please suggest me how to find out the structure field stores the value in which table.
Exanple : i have a strutured field in T.code cj31 is BPDY-WERT1 and it is stotring value 10,000,000.00. know i need to find out in which table this value is storing .
Please suggest me its urgent.
Thanks in Adavance!!!
Points will be rewarded.......
Regards,
Kranthi

hi,
Go to transaction ST05,Click activate trace with filter,Give the transactio name as cj31,Go to the transaction and navigate to the place where the particular field is present, then again go to st05 ,Deactivate the trace and display the trace.
Now u can see how the data is fetched ,U can even go to display mode of the same transaction cj33
Thanks
San

How to find out the calling point of a Badi

Hi Experts,
Say one Badi is getting called in a particular screen of a transaction.
Can anyone please guide me how to find out the calling point for that Badi.
I checked for transaction CC31 screen 2000, method IF_EX_ECM_EXIT~OMR_CHECK_01
is getting called.
But I could not find the calling point.
Please help.
Thanks,
Sonali.

Go in to the perticular method, and click on where used list.That may help.
Or get into the method in debugging, and press F7. That will take you to the calling point.

How to find out the total, subtotal in alv report

hi dears,
how to find out the total, subtotal in alv report?
pls tell me logic ,
i will be waiting for eply
regards
eswar

Hi,
ALV Grid List with sub-totals
REPORT z_demo_alv_sort.
* This program lists orders (VBAK) with sort and sub-total for *
* 'sold-to-party' (KUNNR) and 'Sales organization' (VKORG) *
TABLES : vbak.
TYPE-POOLS: slis. " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
 vkorg LIKE vbak-vkorg, " Sales organization
 kunnr LIKE vbak-kunnr, " Sold-to party
 vbeln LIKE vbak-vbeln, " Sales document
 netwr LIKE vbak-netwr, " Net Value of the Sales Order
 waerk LIKE vbak-waerk, " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
* Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
 FROM vbak
 UP TO p_max ROWS
 WHERE kunnr IN s_kunnr
 AND vbeln IN s_vbeln
 AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
* Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
 add 1 to ls_fieldcat-col_pos.
 ls_fieldcat-fieldname = &1.
 ls_fieldcat-ref_tabname = 'VBAK'.
 ls_fieldcat-do_sum = &2.
 ls_fieldcat-cfieldname = &3.
 append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
 add 1 to ls_sort-spos.
 ls_sort-fieldname = &1.
 ls_sort-up = 'X'.
 ls_sort-subtot = &2.
 append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
 ls_fieldcat TYPE slis_fieldcat_alv,
 lt_fieldcat TYPE slis_t_fieldcat_alv,
 lt_sort TYPE slis_t_sortinfo_alv,
 ls_sort TYPE slis_sortinfo_alv,
 ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 is_layout = ls_layout
 it_fieldcat = lt_fieldcat
 it_sort = lt_sort
 TABLES
 t_outtab = gt_vbak.
ENDFORM. " F_DISPLAY_DATA
***************** END OF PROGRAM Z_DEMO_ALV_SORT **********************
Regards
Sudheer

How to find out the particular form available language?

Similar Messages

Maybe you are looking for