How to find out the patch is critcal or not
Hello,
Right now I am referring "http://sunsolve.sun.com/search/document.do?assetkey=1-34-patchdiag.xref-1" for the patches and update details.
But there is no information about the patch severity(critical or not).
From where can I find the severity of patches?
Thanks in advance,
Chanthu
Well, patches labeled as 'recommended' or 'security' are typically critical in one way or another (R or S in the xref).
Other than that the typical way to determine if a patch is critical to your environment or not is to read through the readme files..
.7/M.
Similar Messages
-
How to find out the object is available or not in BC
Hi dear friends,
Suppose I want to design/create a Cube / ODS, before going to create that object, how to find out the same type of Object is available or not in BC with the specification which I want
Thanks in advanceHi Paul,
at least you need to know the application you are talking about. Then you can goto that particular area and evaluate the content (cubes, infoobjects, infosources, datasources). It will surely give you an idea of the fulfilment of your requirements by the content.
Siggi -
How to find out the list of implemented OSS Notes in a particular period.
Hi Friends,
Need help.
I need to find out the list of OSS Notes implemented in a period in a particular system.
Could you please suggest the table or program or any way to find out the OSS Notes Implemented date wise?
Thanks in Advance.
SreenivasHi Sreenivas.
How did you find the solution to this? Trying to do the same thing!
Cheers,
Tom -
How to find whether the patch is applied or not in SOA?
Dear Legends,
I need to find a given patch(13615085) is applied or not in SOA Environment(RAC). I do not have O/s Level access, so I cannot issue Opatch lsinventory.
I tried
select * from dba_registry_history; - nothing is displayed.
Thanks in Advance,
KarthikTo check patchs installed:
From Opatch
$ORACLE_HOME/Opatch> opatch lsinventory
From sql
select * from dba_registry_history;
*To execute Opatch you don't need root privileges, you can also do it from oracle user
If you don't see anything executing "select * from dba_registry_history;" You haven't any patch installed. -
HOW to find out the tablespace space utilized by a patch after applying the
someone has already applied the patch in test env before recording the tablespace size , so I cannot find out the figure in test env.
So is there any general practice or general guidelines on it?
hOW to find out the tablespace space utilized by a patch after applying the patch?
Thanks & Regards,
Sree.
Edited by: 846579 on Mar 22, 2011 10:50 PMI think there is no direct way to determine what tablespace is utilized by a patch from the README file. You could check the content of the patch file and see what modules are affected (assuming there are changes and the database level), then query DBA_USERS (DEFAULT_TABLESPACE column) for those schemas which are updated by a patch. Or, you could check the size of the tablespaces before and after applying the patch and you will determine what tablespaces have been utilized (provided that the application services are down, and none of the application users is connected to the application).
Thanks,
Hussein -
How to find out the common things between two rpds?
How to find out the common things between two rpds? And place the common things in a common RPD.
I thought of one solution.
Original RPD = A
Modified RPD = B
XML Patch created for A-B = X
Now open the XML Patch in IE or Mozilla and delete the columns/tables/variable/etc,. from the Original RPD A.
But its a cumbersome process, if the XML file is of very less size its Ok. If its 10-20 MB then going line by line and deleting the change is not the process to be followed.
I have to check whether its just the delete or modify or drop.
Let me know your thoughts. -
How to find out the user-exits?
hi.
how to find out the user-exits?
regards
eswar.Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards -
How to find out the Transactions used per month & the USER who used that
Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
layout TYPE slis_layout_alv,
variant TYPE disvariant,
events TYPE slis_t_event WITH HEADER LINE,
heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
wa_usertcode TYPE swncaggusertcode,
wa TYPE zusertcode,
t_ut TYPE STANDARD TABLE OF zusertcode,
wa_result TYPE zusertcode,
t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
EXPORTING
component = 'TOTAL'
ASSIGNDSYS = 'DEV'
periodtype = 'M'
periodstrt = month
TABLES
usertcode = t_usertcode
EXCEPTIONS
no_data_found = 1
OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
wa-user = wa_usertcode-account.
IF wa_usertcode-entry_id+72 = 'T'.
wa-tcode = wa_usertcode-entry_id.
wa-report = space.
ELSE.
wa-tcode = space.
wa-report = wa_usertcode-entry_id.
ENDIF.
COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
is_layout = layout
it_fieldcat = fcat[]
i_save = 'A'
is_variant = variant
it_events = events[]
TABLES
t_outtab = t_ut
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA -
How to find out the person who did a transport.
How to find out the person who did a transport.
There are 3 basis admins in our Org.
so is there a way of tracing out , who did what transport.
Regards,- Goto import Overview (STMS)
- Import Queue
- Select DEV req (goto Import History)
- Edit - Display More
It will show the user who did the transport
Rgds -
How to find out the user who has created a new field in the custom table.
How to find out the user details who has created a new field in the custom table.
Thanks,
JoanHi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
How to find out the selected column in Table Control
Hi all,
How to find out the selected column in Table Control?
Thanks & Regards,
YJRHi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
WITH KEY SELECTED = 'X'.
IF SY-SUBRC = 0.
CLEAR: W_DUMMY, W_COL_NAME.
SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
W_COL_NAME.
endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha -
How to find out the selected line in list
Hi all,
Can any one tell me how to find out the selected event in the listYour subject said 'selected <b>line</b> in list' and your description says 'selected <b>event</b> in the list'. Which one is it you want to know?
For line you will use the event AT LINE-SELECTION and for event you will use AT USER-COMMAND.
Please reward and close if answered, if not, please revert back to the forum with more details.
Thanks,
Srinivas -
How to find out the users currently logged into ODI
Hi all,
How to find out the users currently logged into ODI Work Repository?
Thanks.Hi,
It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
Thanks,
katukota -
How to find out the tables from extract structures
Hi All,
As I know my data sources are 2lis_04_p_matnr,2lis_04_p_comp,2lis_04_p_arbpl.
How to find out the tables concerned with the fields in the extract structure.
ThanksPl check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
OR navigate to: help.sap.com - netweaver - bi content - supply chain - look for your application area and the extractor and you will see the source tables and fields.
Ravi Thothadri -
How to find out the metachian from subchain
hello friends,
could you please let me know , how to find out the meta chain from subchian .
I know the subchain name and wanted to check that this chian is included in which meta chian ,
actaully here so many chain , so its confusing .
Is there any way ?Hi,
Pls chk this links,
Re: Meta chains - how to create n example scenerios
Re: How to create process chains, infopackage groups & Meta chains
Hope this helps,
regards
CSM reddy
Maybe you are looking for
-
I unable logon to application after upgrade to 11.1.1.2
Hi, I have problem to logon to HFM application after upgrade from 9.3.1 version to 11.1.1.2. The application is "Classic Application". I upgraded SharedServices(HSS), Planning, AnaliticServices, Workspace and HFM. Everything is OK. I can logon to all
-
Urxvt vs gnome-terminal font style difference
Hi All, I`m using ubuntu mono font with cleartype patches for my terminal. On gnome-terminal the fonts look good but on rxvt-unicode they look different (more sharp, thin and wide). How do I make the fonts look good in urxvt just like gnome-terminal
-
Divide key figures in real time cube by using planning function
Dear all, I have a real time cube which contains one key figure which is defined by 10 characteristics. For one country, the users types the values fpr the key figure in a wrong format, so I have to divide those values by 1000. I have tried to do thi
-
Alerts not stored in SecMon during database compaction period
I used the idsDbCompact utility to compact the SecMon database which took a few hours. After the compaction, I cannot find in the database any alerts generated by the sensors during the compaction period. Is there a way to recover/retrieve those aler
-
Possibility to abort the execution from within the PreUUT and MainSequence
Hello, This is probably a TS newbie question that most of you can answer right away! I'm using the sequential model to develop my test. I cannot figure out how to do terminate the execution from within the PreUUTLoop or MainSequence callback. In the