How to find out the percentage of code loaded using the load instrument vi

i am loading my software through preload instrument.vi. Is there any way to know the percentage of the vi loaded, in parallel when the vi is getting loaded.

I do not think so.
If you carefully watch other loaders, you will see that the bars do not not update at a constant rate. They usually update in chunk fasion.
You could get the size of all of the VI before starting the loads and update your progress bar based on percent of total code loaded. If smooth updatesis readlly important, you could track the load time vs files size and use that to do some periodic incremental updates.
Cluge? yes!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How to find out which sequence a certain column used?

you konw column C in table T is created by a sequence.
How to find out which sequence column C is using?

In the meantime I think it ought to becompulsory to
only assign sequence values in triggers.
Why? I can see no good reason for this. I think it's a good idea to have stuff like this
coded in only one placeI don't like your argument for compulsory using triggers for sequences for exactly the same reason as you, ie that I like to keep my code in one place. If I'm reading some pl/sql code which uses a sequence I like to see the fact that the sequence is used in the pl/sql code, rather than to check to see if theres a trigger on the table and then see which sequence that uses.
"naming conventions can work, provided they're enforced. Alas, like other standards, they can only be enforced by active policing".
Thats what code reviews are.
" there is also the special case of one sequence populating more than one table...."
This is My Pet hate. I don't think there's ever a case where this is absolutely necessary. Again code reviews
Unfortunately I have to live with a system which does this.
and I appreciate we can't all have code reviews, etc.

HT3986 how to find out serial no. of imac while using windows 7

how to find out serial no. of imac while using windows 7

In Windows open up the Command Prompt and type the following:
c:> wmic bios get serialnumber

How to find out whether a material code in SAP has any transaction history

Hi Guys,
I want to find out whether a material code in SAP has any transaction history or not. In other words, I want a list of all those materials, division-wise, which have not been subjected to any sort of transaction in SAP till date , i.e., lying unused.
Can any of you in help me out regarding this matter ?
Regards,
Anirban

hhi
go to se16
table MBEW and field LBKUM for total stock
from here u can conclude for the zero stock material
or try this
S_ALR_87012963 - Material Where-Used List
regards
kunal

How to find out FICO user exits that are used by User

How to find out the FICO user exits that are used by user.

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

How to find out which site and list is using InfoPath form

Hi,
We have a site collection with 100+ sites. We are doing analysis of these sites for SP-2013 upgrade, I would like to know which site lists are using a InfoPath form, how do I find out this without manually going through all the
sites & lists.
Thanks,
Pat

Hi
You can Use sharepoint Manager to do so.or use below link
http://blogs.msdn.com/b/david/archive/2011/08/25/powershell-script-to-locate-content-type-useage.aspx
http://aarebrot.net/blog/2011/02/using-powershell-to-retrieve-content-types-and-associated-fields/
As info path form deploy as content type you can find usage of content type
Regards, Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful http://sharepointundefind.wordpress.com/

How to find out which C library I am using?

On my Solaris 9 UltraSparc system,
% echo $LD_LIBRARY_PATH
/opt/gcc/3.4.4/lib:/opt/glib/2.12.1/lib:/opt/gnome/lib:/opt/openssl/0.9.7g/lib
% /usr/lib/libc.so
usage: ld.so.1 [-e option,...] dynamic-object [object args,...]
On my Solaris 10 x86 system,
% echo $LD_LIBRARY_PATH
/pkg/gcc/4.2.1/lib:/opt/gcc/current/lib:/opt/glib/2.10.1/lib:/usr/sfw/lib:/usr/lib/mps:/opt/openldap/lib:/opt/openssl/current/lib
% /usr/lib/libc.so
usage: ld.so.1 [-e option,...] dynamic-object [object args,...]
On my Linux/x86 system,
% echo $LD_LIBRARY_PATH
/opt/openssl/0.9.7g/lib:/opt/gcc/3.4.4/lib:/opt/binutils2.13/lib:/opt/glib/2.12.1/lib:/opt/java/j2sdk1.4.1_01/lib
% /lib/libc.so.6
GNU C Library stable release version 2.6.1, by Roland McGrath et al.
From the above, can one tell what C library I am linking to on the Solaris systems? If not, how can one tell? How do I know the exact location of the C library I am using?
On the Linux/x86 system, I can use gnu_get_libc_version() to find out the version of glibc I am supposedly using. But it does not work when I compiled the identical C program using gcc on the Solaris 9/UltraSparc and Solaris 10/x86 systems. If I can use gnu_get_libc_version() , does that mean for sure that my C program links to glibc? On the other hand, if the linker reports that gnu_get_libc_version() is not found, does that mean for sure that my C program is not linked to glibc?
Is there a function on the Sun libc similiar to gnu_get_libc_version()?
http://docs.sun.com/source/819-3690/Using.Libs.html says "The Solaris operating system comes with several libraries installed in /usr/lib. Most of these libraries have a C interface. Of these, the libc and libm, libraries are linked by the CC driver by default." If one wants to link to the glibc library, how to override the default? How to find out the default? Is it in some environ variable? If one changes the CC driver to gcc, does the default remain the Sun libc? And if one compiles explictly using gcc, i.e. "gcc myprog.c", is the default C library the Sun Library, or glibc?
gnu.org has a (web page for the) glibc manual but I am not able to find a Sun C Library Manual. Is there one?
Edited by: hzmonte on Jun 28, 2008 1:43 AM

I'll discuss only the Sun C compiler here. For questions about gcc, look in the gcc manual, or try a gcc forum.
Run the command "ldd" on an executable file or shared library, and it will report the shared libraries that it will link to, based on any runpath in the file, and on LD_LIBRARY_PATH. Example: % echo $LD_LIBRARY_PATH
LD_LIBRARY_PATH: Undefined variable
% cc hello.c
% ldd a.out
        libc.so.1 =>     /lib/libc.so.1
        libm.so.2 =>     /lib/libm.so.2
        /platform/SUNW,A70/lib/libc_psr.so.1 BTW, except possibly for testing, there is usually no need to set LD_LIBRARY_PATH, and setting it is usually a bad idea. For more on this topic see Rod Evans' blog:
[http://blogs.sun.com/rie/entry/tt_ld_library_path_tt]
Prefer to set a runpath in the executable so that no client needs to set LD_LIBRARY_PATH.
If you want to know what libraries the C compiler will link, based on a given command line, you can add the -v (verbose) option, which will display each subcommand. Or you can use the -### option, which shows what commands would be run. Example: % cc -### hello.c
### Note: NLSPATH = \
/opt/SUNWspro/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/opt/SUNWspro/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
###     command line files and options (expanded):
### hello.c
/opt/SUNWspro/prod/bin/acomp -xldscope=global -i hello.c -y-fbe -y/opt/SUNWspro/prod/bin/fbe -y-xarch=generic \
-y-xmemalign=8i -y-o -yhello.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly \
-xdbggen=incl -y-s -m32 -fparam_ir -Qy -D__SunOS_5_10 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix \
-D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun \
-Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/opt/SUNWspro/prod/include/cc \
"-g/opt/SUNWspro/prod/bin/cc -c " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
### Note: LD_LIBRARY_PATH = <null>
### Note: LD_RUN_PATH = <null>
/usr/ccs/bin/ld /opt/SUNWspro/prod/lib/crti.o /opt/SUNWspro/prod/lib/crt1.o /opt/SUNWspro/prod/lib/misalign.o \
/opt/SUNWspro/prod/lib/values-xa.o hello.o -Y "P,/opt/SUNWspro/prod/lib/sparc:/opt/SUNWspro/prod/lib:/usr/ccs/lib:/lib:/usr/lib" \
-Qy -lc /opt/SUNWspro/prod/lib/crtn.oThe basic runtime support library is /lib/libc.so.1, on any version of Solaris, used by every compiler version. You can check the patch version of the library by running
showrev -p | grep <patch>
where <patch> is the patch number for the library. The patch number depends on the Solaris version. You can get more information at [http://sunsolve.sun.com].
There is no manual specifically for the C library. There is a Solaris man page for each function in the library, and you can check the C Users Guide and the Solaris Linker and Libraries Guide for additional information.

How to find out what text encoding has been used in mp3 tag

Hello
I have some foreign songs that I am importing into itunes. When a song called "04.公路塵埃北合起." gets imported, it comes up in itunes as "04.§Ω∏Ù π–ÆJ •¶X∞"
Now I don't know a lot about different text encodings, but from what I've read on the forums is that the problem is that the tags that are encoded on the srcfiles are not unicode. I have tried the java application "UnicodeRewriter" recommended elsewhere in the forums, but both the commone Chinese ecodings, viz Big5 GBK etc.
Is there a way to cut a world from (eg a chinese glyph) and somehow find out what text encouding has been used?

Sorry, that question wasn't very well phrased. I'll try it again.
I have some foreign songs that I am importing into itunes. When a song called "公路塵埃北合起" gets imported, it comes up in itunes as "§Ω∏Ù π–ÆJ •¶X∞"
Now I don't know a lot about different text encodings, but from what I've read on the forums is that the problem is that the tags on the srcfiles are not unicode. I have tried the java application "UnicodeRewriter" recommended elsewhere in the forums, but whatever I sent the source encoding to, eg Big5, GBK, or one of about 9 others, I just get different types of garbage coming through.
Is there a way I could take the original glyph in the file name (which shows up correctly on my desktop) and paste it into some sort of table. That table will then show me how that glyph will look in all different encodings without the correct conversion. So if I can match my "公" to my "§" I'll be able to see what the src encoding is.
I know this is a longshot, but any help appreciated.
Sorry for the rather rubbish explanation earlier.

How to find out where a variable has been used?

How can I find out where a variable has been used within a package/interface/procedure?
Should I check it using repository's internal tables?
Thanks

Hi,
you have to make some queries to find variable used in which ODI object.
like, it fetch the variable with scenario name and scenarion can serve your need.
select v.i_var,v.var_name,s.scen_name from
ODEV91119_ODI_WORK.snp_var v,ODEV91119_ODI_WORK.snp_scen s
where
s.i_var=v.i_var
and s.scen_NAME='V_BTCH_NAME'
and agree with SH answer
Thanks

How to find out if Applicatin Server is running on the server

Hello,
On a unix server, how would I find out if there are Application Servers running?
What would I grep for? ps -ef|grep .... Thank you.

Hi,
On Unix platform, jus login as AS owner, set your Env. well.
on the prompt cd $ORACLE_HOME\dcm\bin
#dcmctl getstate -v -d
form more info. on how to use dcmctl, just type in on the prompt
#dcmctl -help
Cheers,
Hamdy

How to find out which materialized views are running on the DB?

So I have a long list of MVs stored on the DB.
Is there a script to find out which MVs are being refreshed right now?
Help!
Thanks

Hi ,
You can use the following data dictionary view to get information on when Mview was last refreshed--
SQL> desc DBA_MVIEWS
Name                                                  Null?    Type
OWNER                                                 NOT NULL VARCHAR2(30)
MVIEW_NAME                                            NOT NULL VARCHAR2(30)
CONTAINER_NAME                                        NOT NULL VARCHAR2(30)
QUERY                                                          LONG
QUERY_LEN                                                      NUMBER(38)
UPDATABLE                                                      VARCHAR2(1)
UPDATE_LOG                                                     VARCHAR2(30)
MASTER_ROLLBACK_SEG                                            VARCHAR2(30)
MASTER_LINK                                                    VARCHAR2(128)
REWRITE_ENABLED                                                VARCHAR2(1)
REWRITE_CAPABILITY                                             VARCHAR2(9)
REFRESH_MODE                                                   VARCHAR2(6)
REFRESH_METHOD                                                 VARCHAR2(8)
BUILD_MODE                                                     VARCHAR2(9)
FAST_REFRESHABLE                                               VARCHAR2(18)
LAST_REFRESH_TYPE                                              VARCHAR2(8)
LAST_REFRESH_DATE                                              DATE
STALENESS                                                      VARCHAR2(19)
AFTER_FAST_REFRESH                                             VARCHAR2(19)
UNKNOWN_PREBUILT                                               VARCHAR2(1)
UNKNOWN_PLSQL_FUNC                                             VARCHAR2(1)
UNKNOWN_EXTERNAL_TABLE                                         VARCHAR2(1)
UNKNOWN_CONSIDER_FRESH                                         VARCHAR2(1)
UNKNOWN_IMPORT                                                 VARCHAR2(1)
UNKNOWN_TRUSTED_FD                                             VARCHAR2(1)
COMPILE_STATE                                                  VARCHAR2(19)
USE_NO_INDEX                                                   VARCHAR2(1)
STALE_SINCE                                                    DATE
SQL>

How to find out local or home interface was used ?

Hi !
are there any ways in the code of methods ejbCreate and ejbRemove in my entity EJB to find out were they called via local or home interface provided that my bean has both local or home interfaces ?
Thenks in advance.

Why should you care, this logic should only be implemented in the client (SEJB or Servlet). Even then it should only be used to check if there is a LocalHomeInterface. If not you get the RemoteHomeInterface. I don't understand the question completely.

How to find out if a client is in use or not in any ABAP instance?

Hi,
I would like find out if a particular client like 100 or 800 or 200 etc is being used by some one or not in an ABAP system, if the client is not in use for a long time then we are planning to remove the client from Sandbox. Is there any TCODE which gives this information, can you please let me know?
Thanks.
Jennifer

Hey Jennifer,
try AL08 then. It provides a list of users/clients listed per server of the landscape, this gives you an excellent overview.
SM04 will show you users logged on that particular client and its respectives t-codes (you will need to log on each client to view this data)
Best regards,
Tomas Black

How to find out where a variant is being used?

Hi,
I have a variant name and would like to know in which program it is being used. How do I find that out?
Thanks in advance.
Mick

Hi,
checkout these tables:
VARIT Variant texts
VARID Variant directory
I think u can enter the variant name and go on for the <b>where-used list</b> for same and can get program name for that variant.
Hope it works out.
Pls reward points iof useful.
Regards,
Ameet

How to find out what is populating a table using sql

I would like to find out what is populating a particular tabe. I used
select name,type from dba_source where text like upper('%some_table%'). I know this will give me procedure,function package etc, If this table is being populated by a form how will i get the form name. I am using window XP oracle 10G database

IF you to check what is running at a precisly momemmt you need to Join :
v$transaction a, Gives you current Transaction going On
v$session b, Gives You info about session User
v$sql c Gives you info about SQL Running at Precisly momment
With these Condition you are able to Find what's is Runnimg
where a.SES_ADDR= b.SADDR (+) and
b.SQL_HASH_VALUE = c.HASH_VALUE(+)
I Hope This May help.
Rgds

How to find out locations whether it is in use or not in use

Hi All,
I want to delete all unused locations from my FDM application. Can you please help me, how to find the locations that are not in use?
Regards,
PB

You can view the tdataseg(x) table that the location is associated with and sort by period key as needed.
Select PartitionKey,Part Name,Partsegmentkey
from tpovpartiton
This will return the location, location id and segment key. The segment key is the data segment that the location is associated with.
You can then query this table and sorty by period key to see what periods the location has data imported for.
This should give you an idea and you can then delete your locations from within the Metadata > Locations Menu in FDM.
Keep in mind that once the location is deleted, and data associated with the location will also be deleted (Historical Data)
Hope that answers your question.

How to find out the percentage of code loaded using the load instrument vi

Similar Messages

Maybe you are looking for