How to find out the process count for a database during a particular window

Hi Team,
I want to find out the maximum process count reached for a database for an interval. Say between 1:00 to 2:00 AM IST. Please help
Database version:11.2.0.2
OS:AIX 6.1

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

Similar Messages

  • How to find out the node count?

    How to find out the node count in illustrator document through programmatically. Kindly advice me.

    Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
    Simialr information is available in DBA_HIST_SYSSTAT.
    Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
    You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
    Regards,
    Sreejith

  • How to find out Max threads count for Custom Work Manager??

    Hi All,
    How to find out Max threads count for Custom Work Manager??
    I have created 1 WM & targeted it to a cluster of 2 MS. Later I created Max thread Constraint = 300 & assigned that to my WM.
    I need to check how many threads maximum were created by my WM after lets say 1 completed day.
    The idea behind that is to understand if .. 300 is enough or need to increase the same way as we do it for JDBC datasource like.. Active connections Max count.. etc.
    Any Idea?
    regards,
    Tanmay

    Hi Ashish,
    Thanks for your response.
    The monitoring page that you are suggesting does not indicate the max thread count reached for a particular WM.
    For example, If I have Sample WM with 300 Max Thread Constraint, is there a way for me to check how many threads have been used out of 300??
    Any pointers in this regard are appreciated.
    Thanks,
    Tanmay

  • How to find out the GR Numbers for which IR has not been done

    Hi Sap Gurus,
    Can anybody tell me how to find out the G R Numbers for which Invoice Receipt has not been done. Any TC or ant standard process to find out.
    Thanks N Regards,
    Siddhartha

    Hi Siddarth,
    Solution :
            1) Go to SE16 - Table Name : EKBE (PO History)
            2) Field - BUDAT (Posting Date)
            3) Transaction event Type:
                             - 1 (Only GR's )
                             - 2 (Both GR and IR)
            4) We can fetch both GR Numbers and also PO Numbers for which IR has not been done if transaction event - 1.
    In addition to MB5S, you can try this also...

  • How to find out the infospoke name for an existing infoobject?

    Hi,
    Could any one pls tell me how to find out the existing infospoke name for an infoobject?
    i've tried with where used list but its not coming....can any one pls suggest
    Thanks,
    Suri

    Hi,
        Check in metadata repository for that infoObject.
    If you are still not able to identify, goto RSBO tx and press F4.
    You will get the list of Infospokes available.
    Go in each and chk from the General Tab, if the infoObject is available in the source system.
    Regards,
    Balaji V

  • How to find out the printer name for the Idoc

    Hi guys
    I want to find out the printer name for the Idoc,,some default printer is attached for one idoc,then how can we see the printer name for this idoc.
    Regards
    Madhoo

    Hi,
    For ALE/IDOC the  medium will be either ALE or EDI but not printer.So it might be wrongly attached.As such there won't be any printer attached to idoc.
    Regards,
    Nagaraj

  • How to find out the best settings for BDT

    Hi there.
    I am trying to predict a movie rating. I downloaded datasets from IMDb, prepared them. A tried all of the regression algorithms, but the best result is giving Boosted Decision Tree. Now I am dealing with the best settings in this algorithm.
    With default, running time was 69 seconds and the mean absolute error was 0.4844, which is quite much I think. So I tried to improve it by changing parameters of the BDT module. I tried to set Leaves per tree to 150 and than experimentaly find
    remaining parameters. I've come to Samples per leaf=12, Learning rate=0.04 and
    Number of trees=700. Running time was 78 seconds and mean absolute error was 0.4596.
    Input of the algorithm is joined matrix with 14 columns (11 features) and 67672 rows splitted into 70:30 (training:testing).
    Is there any way how to find out the best setting of Boosted Decision Tree?

    Yordan's suggestion is correct, though the documentation is a bit outdated.
    You can use the single parameter + sweeper mode or define your own custom ranges in the BDT module with the Parameter Range setting
    Regards,
    aK

  • How to find out the process chain

    Hi folks
    Hope every one is doing good..!
    in sm37 my job is running (ABAP program) which is in process chain, but i have to find out the process chain name..!
    Could any one help me on this..!

    hi,
      in SM37 select the job status as active and execute it, in the next screen you  will find only active jobs select your job (ABAP Program) click on step - > in th next screen put the cursor on the job -> select Goto option in menu bar click on variant it gives you the field names and desc like chain name, variant etc information.
    Regards
    Sankar

  • How to find out the User Details for the particular transaction

    Hi,
    Actually AJAB -Asset Year closing was done by One User.How and Where to find out the User details who executed the Transaction.Kindly tell me the T-code for this.
    Thanks
    Sap Guru

    Hi:
    Please contact you basis administrator.Give him the T.code and date when Year closing was done. He may resolve your problem.
    Please let me know if you need more information,
    Assign points if useful.
    Regards
    MSReddy

  • How to find out the logout details for a perticular user .

    Hi,
    I have an requirement to write a report which will run for hourly basis. using this program  i need to find out the logon & logout details so that i can calculate  the total productive hour for a perticular user. using table usr41 i can find out the logon detail. but i need to know the logout detail also to calculate the productive hour.
    pls suggest.

    Hi,
    Check these below threads:
    user log in & log out time SAO
    How to find user log-out time ?
    Regards,
    Nitin

  • How to find out the set handler for a particular signal?

    I have an interesting puzzle to solve. l'm investigating problems with someone else's code and I'd like to get the name of the handler that is set for SEGV. psig shows that the process catches SEGV, however I don't have access to the source code for all the libraries it links against and none of the source code I have sets a handler for SEGV. Is there a way to find out the name of the signal handler that is set for a particular signal in a process? I'm sure the source was compiled with cc -g. Solaris 8

    Hello Haritha,
    Please follow the path.
    Go to RSA1 -> Metadata Repository ->DataStore Objects(ODS) -> Find you DSO(ODS) there and click on that, you will get all the details(Queries, Objects - Char, Key figures, update rules,etc..) related to that particular DSO(ODS), same is the case for Cube as well.
    Please assign points.

  • How to find out the Area Menu for a Report/ Table/Function Module

    Hi,
    Is there any procedure to find out the <b>"AREA MEANU"</b> for a Report/Table/Function Module...
    Or is there any Transaction code / Report is available to find out all the report for a particular "AREA MENU".
    Thank you for your quick response...
    Regards,
    Thiru
    <b></b>

    Hi,
    Check these below threads:
    user log in & log out time SAO
    How to find user log-out time ?
    Regards,
    Nitin

  • How to find out the table, data for the IDOCS is pulled from?

    HI
    The ZFPH9999397 VENDOR FEED job runs the RBDMIDOC program with the variant Z9999_397.  This creates IDOCS that are sent out and eventually wind up in IMOS.
    The IDOC Type is CREMAS.
    Can you tell me which table or tables the data for these IDOCS is pulled from?
    Or tell me the procedure to find out the table name.
    Thanks,
    das.
    Edited by: sathish dasari on Dec 10, 2009 11:54 AM

    You can use Transp. Table      TBD62 .
    enter Message Type                      CREMAS
    you will get the list of tables and the fields from which data is pulled based on the change pointers in Transp. Table      BDCP.

  • How to find out the ASCII Values for Spanish character

    Hi,
    I had an requirement to store Spanish character and also need to fileter the records based on the Spanish character.
    Kindly guide me for below.
    To filter the Records which contains spanish characters?
    To get the ASCII Values for the particular column?
    E.g. we can find out the ASCII value of 'a' by using the syntax select ASCII('a') from dual.
    But I want to find the ASCII Values for the particular column value. Ie. name.
    E.g., Client name is "Suresh", I want to the ASCII Values for entire name of "Suresh".
    Kindly do the needful help / Guidance on this.
    Thanks,
    Orahar

    To expand on what I said in my first post, you want to do something along these lines:
    with t (thename) as
      select 'Suresh' from dual
    select thename
         , substr(TheName, level, 1)
         , ascii(substr(thename, level))
      from t
    connect by level <= length(thename);The output of the above query is:
    THENAM S ASCII(SUBSTR(THENAME,LEVEL))
    Suresh S                           83
    Suresh u                          117
    Suresh r                          114
    Suresh e                          101
    Suresh s                          115
    Suresh h                          104
    6 rows selected.Note that the WITH statement is only there to simulate a table for this example. With a table, all you do is get rid of the with and substitute the name "t" for the name of your table (also the name of the column to whatever name the column has in your table).
    Lastly, I suggest you post your question along with, an example table and the output you'd like to get in the PL/SQL forum. There are people there that will give you all kinds of great ways of solving that problem.
    HTH,
    John.

  • How to find out the roles set for the current session?

    Hi,
    I wanted to find out the roles set to the current session. Which system view or table gives this info?
    Thanks
    Seshu

    SELECT * FROM session_roles

Maybe you are looking for

  • Itunes file wont open

    so im trying to install itunes to my computer and when i enter my email adress to download it.the file doesnt open .i dont get it plizzz help .!!!!!!!!!

  • Move env-entry from web.xml into deployment plan

    I have: <env-entry> <env-entry-name>USERNAME</env-entry-name> <env-entry-value>someUser</env-entry-value> <env-entry-type>java.lang.String</env-entry-type> </env-entry> and I'd like to move it from web.xml into my_app_plan.dat. Is it possible? How? T

  • How can i trace my lost iphone 4

    how can i trace my iphone since the lost phone is offline?

  • Physical Standby re-sync

    Hi, I have gone through the following link in order to re-sync my physical standby with the primary db . The physical standby had nearly 2500 archive log gap but resolved based on below link : http://www.bestremotedba.com/oracle-10g-dataguard-sync-st

  • I can't print background colors

    I have tested every combination of checks in the colors section of options in tools. There are puzzles I like to print out. Without background color they are not useful. I have to go to Internet Explorer for this purpose where this is no problem.