How to find out the provider information of a cell phone (from deceased relative)

Hello all!
I have an odd sort of question that I am hoping for some help on. My wife's uncle recently passed away and we are now in possession of his old cell phone. He was slightly estranged from the family and didn't share a lot of information so we currently have no idea whether this phone is prepaid or if it uses a service provider. We would like to find out who the provider is, if there is one, so that we can cancel service, but are not sure how to go about doing this. We have been unable to find any information on his phone as of yet. Is there any way that this information can be found?
Thank you so much for the help!

http://http://www.peoplesmart.com/phone
Enter the number, the next screen will show the provider.
Other option, just call *611 from the phone

Similar Messages

How to find out the failed sql command and its data from DEFERROR

Hi,
has anybody a procedure or some other possibilities to read the content of column USER_DATA of the advanced replication view DEFERROR in order to find out the failed sql command and its column values?
Thanks in advance.

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

How to find out the memory status of RT PXI controller from host?

I want to find/read the memory status of the RT controller from host programmatically. Can any one have any idea about it? If yes can please share your valuable suggestion.
Regards
Vijay

Hello Vijay,
Check out the attached example, it monitors the CPU usage as well as the memory usage. You will need to install our STM component that you can download here:
http://zone.ni.com/devzone/cda/epd/p/id/2739
Message Edited by Jimmie A. on 06-12-2008 03:08 AM
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal
Attachments:
CPU and Memory Tracker1.zip ‏150 KB

How to find out the save as setting information in illustrator cs3?

How to find out the save as setting information in illustrator cs3 through programmatically. I saved the file using the setting like Overprint, EmbedAllFonts, IncludeDocumentThumbnails throgh scripting. But i don't know how to find out the save as setting information(Overprint, EmbedAllFonts, IncludeDocumentThumbnails) whether the checkbox true or not through scripting. Kindly advice me.

Thanks for your response. Some time the operator will set the wrong "save as setting" in the eps file . So i need to check wheather the operator set the correct save as setting or not. If the operator set the wrong save as setting, i need to inform while running the script. So please advice me how to find out the save as setting information of the active document file, and then inform to the operator if any improper "save as setting" occured.

How to find out the account group information in customer master record?

how to find out the account group information in customer master record?
in which tab? thanks in advance

Hi
Go to XD02 and select the Extras from the main menu , you will find Account group info -> click on the No.ranges.
reward if it helps
SR

How to find out the tables effected information from oracle from

can any one tell me how to find out the tables effected information from oracle form

Hi,
Please refer to the following documents.
Note: 259722.1 - HOWTO Determine Table and Column Name from a field in a form in 11i
Note: 241628.1 - How to Find the Query That Succeeded Recently?
Regards,
Hussein

How to find out the changes made to a photo in numbers rather than in graphs..

How to find out the changes made to a photo in numbers rather than in graphs..

We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

How to find out the PATTERN, GRADIENT and BRUSHED objects?

How to find out the PATTERN, GRADIENT and BRUSHED objects information in illustrator active document file. And also how to find the CMYK and RGB color information in illustrator file through javascript. Could you please provide any examples.

I tried using the below code. But for both "cmyk" and "grayscale" pattern it gives only CMYK. Kindly check and advise.
Code:
var docRef = activeDocument;
for(var i=docRef.inkList.length-1;i>=0;i--){
var inkRef=docRef.inkList[i];
var inkRefName=inkRef.name;
alert(inkRefName);
alert(inkRef.inkInfo.kind);
Thanks for looking into this.

How to find out the idoc type required for our requirement

Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
Prasanna

Hi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A

How to find out the transmission delay?

Hi
How to find out the transmission delay in RF transmission?
Regards,
Vijay

Hello,
There is not enough information in this post to provide a good answer. If you can provide more details perhaps we can provide better insight.

How to find out the "manufacture date"?

Hello!
Can you tell me how to find out the manufacture date of my Satellite A110-334 with the serial "SY6224123K"?
I need this information for my insurance!
I found only this link for HDD`s: http://www.storage.toshiba.eu/index_manual.php?pid=220&sid=536&la=en
But there is no "S" on the first digit!??
So it is maybe "Y6" which can be November 2006! Is this right?
Thank you!
===========
This is the information on the link above:
How to encode a Toshiba Hard Disk Drive Serial Number?
The Toshiba serial number (S/N) includes details of the date of manufacture. The first digit of the serial number indicates the Month of manufacture and the 2nd digit indicates the Year.
Example:
M Y x x x x x x x
M = Month
Y = Year
The month digit goes from 1, for January, through to 9, for September, and then X, Y and Z, for October, November and December.
Examples:
2 8 1 7 0 0 0 1 A
2 = February
8 = 1998
3 0 5 4 4 3 0 6 T
3 = March
0 = 2000
X 9 D 7 8 3 3 1 T
X = October
9 = 1999
The remaining digits contain information about factory and production line, and some digits are reserved for a continuously running serial number.

Hello
Try with http://gedb.toshiba.com/
Let me know if you find info you need.

How to find out the node count?

How to find out the node count in illustrator document through programmatically. Kindly advice me.

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

HOW to find out the tablespace space utilized by a patch after applying the

someone has already applied the patch in test env before recording the tablespace size , so I cannot find out the figure in test env.
So is there any general practice or general guidelines on it?
hOW to find out the tablespace space utilized by a patch after applying the patch?
Thanks & Regards,
Sree.
Edited by: 846579 on Mar 22, 2011 10:50 PM

I think there is no direct way to determine what tablespace is utilized by a patch from the README file. You could check the content of the patch file and see what modules are affected (assuming there are changes and the database level), then query DBA_USERS (DEFAULT_TABLESPACE column) for those schemas which are updated by a patch. Or, you could check the size of the tablespaces before and after applying the patch and you will determine what tablespaces have been utilized (provided that the application services are down, and none of the application users is connected to the application).
Thanks,
Hussein

How to find out the application server info

Hi, I am wondering how to find out the application server info in Java code, just like how to find out the db platform being used. Thanks

Hi,
I am not aware of any spec defined way of finding out such info. There may be vendor specific APIs or mechanisms.
But you can use environment entries in your deployment descriptors to specify the information and make use of the entries inside your j2ee component. That will make your code platform neutral.
Sahoo

How to find out the condition type of the tax code in the PO document

Hi friends,
My questions is how to find out the condition type of the tax code in the PO document.
When you use me23n to display one PO document. In the invoice tab, there is one text field named 'tax code' whose value could be T1, T2, J1, J2 and so on. Beside the text field, there is one button named taxes. When you click the button taxes, it will show you the condition type of the tax code. For example, if the tax code is 'T1', then its condition type 'mwcn'.
I want to use the information on the PO to find out the value 'mwcn' of the tax code 'T1'. Could anybody help to describe the logic?it looks like the value is saved in the table konp. But I don't know the logic. Please describe. Thank you.

Hi,
Hope you have asked for select query..
select single knumh from a003 into wa_knumh
where mwskz = wa_itpotab-mwskz
and kappl = 'TX'
and aland = 'IN'.
select single kbetr from konp into wa_kbetr
where knumh = wa_knumh.
cheers,
Dep

How to find out the provider information of a cell phone (from deceased relative)

Similar Messages

Maybe you are looking for