How to find out the Release date & Release code of PO's ?

Dear All,
Is there any standard reports available to find out the Release date & Release codes of PO's which are already released & the PO's which are pending for release ?
Regards,

HI All,
Thanks a lot for your response.
In ME2N,ME2M etc..I have to select each single PO line item & then have to go to Header Changes to find out this info.
So, Is it possible to find out the release codes/release date of all the PO's in a single shot?
Hope my query is clear.
Thanks & Regards,

Similar Messages

  • How to find out the "manufacture date"?

    Hello!
    Can you tell me how to find out the manufacture date of my Satellite A110-334 with the serial "SY6224123K"?
    I need this information for my insurance!
    I found only this link for HDD`s: http://www.storage.toshiba.eu/index_manual.php?pid=220&sid=536&la=en
    But there is no "S" on the first digit!??
    So it is maybe "Y6" which can be November 2006! Is this right?
    Thank you!
    ===========
    This is the information on the link above:
    How to encode a Toshiba Hard Disk Drive Serial Number?
    The Toshiba serial number (S/N) includes details of the date of manufacture. The first digit of the serial number indicates the Month of manufacture and the 2nd digit indicates the Year.
    Example:
    M Y x x x x x x x
    M = Month
    Y = Year
    The month digit goes from 1, for January, through to 9, for September, and then X, Y and Z, for October, November and December.
    Examples:
    2 8 1 7 0 0 0 1 A
    2 = February
    8 = 1998
    3 0 5 4 4 3 0 6 T
    3 = March
    0 = 2000
    X 9 D 7 8 3 3 1 T
    X = October
    9 = 1999
    The remaining digits contain information about factory and production line, and some digits are reserved for a continuously running serial number.

    Hello
    Try with http://gedb.toshiba.com/
    Let me know if you find info you need.

  • How to find out the Hire date of an employee?

    Hi All
    What is effective date, Latest start date and other date fields which are are used when we create a new employee?
    What is the difference between hire date and joining date?
    How to find out the Hire date and joining date of an employee?
    Regards
    Rahman

    The effective dates are related to date tracking. The effective start date shows when this version of the record became effective.
    The Hire Date, or Latest Satrt Date shows the date on which the employee was last hired. If he was hired before from 01/01/01 to 31/12/01, then left but was hired again from 01/01/07, the Latest Hired Date would be 01/01/07 and the First Hired Date would be 01/01/01.
    When using Oracle HR, datetracking allows you to either correct data (because it was wrong or incomplete), or update it (because a time effective change took place e.g. got married).
    The[b] effective dates show when a record was updated. So, if an update was made on 07/02/07, and the update datetrack option was used, the current record would have its effective end date set to 06/02/07 (the day before the update) and a new version would be created with the updates and an effective start date of 07/02/07.
    Hope this helps.

  • How to find out the last date & time on which a program has been run

    Hi Experts,
    Can anybody tell how to find out the last date on which a purticular program has been run.
    Valuable answers will be rewarded.
    Thanks & Regards,
    Satish.

    Hi!
    Try STAD transaction. Unfortunately it contains a huge amount of data, so it is available only for a few days backwards... Maybe some weeks, but you can't make yearly reports from its data... So it's not useful to see, which program is in use or not...
    I planned once to download it weekly, but it was not so important...
    Regards
    Tamá

  • How to find out the table, data for the IDOCS is pulled from?

    HI
    The ZFPH9999397 VENDOR FEED job runs the RBDMIDOC program with the variant Z9999_397.  This creates IDOCS that are sent out and eventually wind up in IMOS.
    The IDOC Type is CREMAS.
    Can you tell me which table or tables the data for these IDOCS is pulled from?
    Or tell me the procedure to find out the table name.
    Thanks,
    das.
    Edited by: sathish dasari on Dec 10, 2009 11:54 AM

    You can use Transp. Table      TBD62 .
    enter Message Type                      CREMAS
    you will get the list of tables and the fields from which data is pulled based on the change pointers in Transp. Table      BDCP.

  • How to find out the aligning Data dictionary table for a structure.

    Hi
    As the table controls are associated with strucures, the data input goes to the data dictionary table aligned to that structure. Is there any way we can find out the table related to that particular structure ?
    Thanks,
    Dhareppa

    Hi,
    The structure and its fields may be associated with multiple database tables.
    You can try by where-used list of the structure/field and then you can look and determine the table by hit and try method.
    Also as suggested above you can try get the SQL trace and then ypu can look for table associated behind the structure/fields I believe this is the best way to find the DB table.
    Thanks,
    Ravi

  • Very easy question - How to find out the first date of year

    Hi Experts,
    I have created Web Dynpro program. I have to set one field "start_date" as first date of year. For example if current date is 04/10/2009, then program should set value of field "start_date" as 01/01/2009.
    If suppose program is used on 12/12/2012, then program should set the value of "start_date" as 01/01/2012.
    Please peovide me some code.
    Regards,
    Gary

    Hi,
    This line should give you the current year.
    Calendar.getInstance().get(Calendar.YEAR);
    Prefix 01/01/ to this will give you the first day of that year.
    Thanks,
    Venkat

  • How to find out the batches released from ASCP

    hello gurus,
    Please let me know how to find out the batches which is released from the ASCP in the OLTP OPM instance, like for the Discrete in the WIP Order in the others tabe we can see that there will be a message like " Job mass loadded on......". So is there any way that we can findout whether the batch is released from the ASCP or is it manually created.
    Thanx & Regards

    Hi,
    You can check it in SM59 if there are any RFC destinations for the above systems.
    Alternatively ,check the table RFCDEST if any entries are maintained
    Regards,
    Lakshman.

  • How do i find out the tables (data)effected in a schema after a particular time stamp

    how do i find out the tables (data not structure)effected in a schema after a particular time stamp?
    pls email in [email protected]

    You can't do that. That would be a real security risc.
    /KAj

  • How do I find out the purchase date of my MacBook Air?

    I need to find out the purchase date of my MacBook Air so I can register it as a product in my Apple ID. I bought the MacBook from a friend, and he doesn't remember the date it was purchased on.

    Giving away / Selling your Mac / Resetting  the computer to the factory condition
    http://support.apple.com/kb/HT5189
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

  • How do i find out the purchase date and my coverage plan?

    how can i find out the purchase date and my coverage plan on my ipad?

    Try here for the warranty coverage. Your date of purchase would be tied to wherever you bought the device.
    https://supportprofile.apple.com/

  • How to find out the exact culpirit session

    How to find out the exact culpirit client machine process to kill the session and release.
    Thanks,

    We can not directly solve this mystery, only you can do so.
    V$SESSION contains data for all connected sessions.
    If no unique combination of fields exists that allows you to identify the culprit client session, then you are out of luck.
    See you started this thread with the premise that 1 session connected to the DB is a problem.
    OK, we will accept this as being true.
    Now via SQL how/what can you SELECT so that only 1 row is returned & that row corresponds to "problem client" session?
    Since this is YOUR system & not ours, only you can solve this mystery.

  • How to find out the IDOC number(urgent)

    hello every one,
    i had recived all the data to BW from R/3 but the request is still running in the system
    for this <b>i need to manually release the IDOC for BD87</b>
    can any one please help me <b>How to find out the Idoc Number in R/3 and In BW for the particular load</b>
    Regards
    Sandy

    hi Siva,
    thanks for ur valuable answer,
    it is showing IDoc num for the succeeded one....
    my present error is Data pack 1 got error and Datapack 2 was success,
    their 3IDocs are their in detail tab all are success
    as per my knowledge it will for the Data pack 2 and it is showing 3different
    how can i find the Idoc which was struck .....
    that need to process manually in BD87..
    please suggest if i am wrong
    Regards
    Sandy

  • How to make use of SE37- Function Module & how to find out the table?

    Hi ,
    1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
    For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
    But after giving the particular name what should i do?
    Please help me.
    2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
    Thanks in adavnce for spending some time
    Raj.S

    Hi Raj
    Function Modules
    Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
    Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating  and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
    Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
    The Function Builder  also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
    Check this link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
    You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
    By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

  • How to find out the time when the ASE started?

    Normally, ASE not reboot for production. Only for maintenance or performance tuning, maybe need to reboot ASE.
    Question is how to find out the time when ASE was started?
    one way maybe is check errorlog. Any more simple way no need to login to server OS?

    Hi Kent,
    In ASE 12.5 and up, you can do 'select @@boottime'  For older releases, a general method is 'select crdate from sysdatabases where dbid=2'
    1> select @@boottime, crdate from sysdatabases where dbid=2
    2> go
                                     crdate
                 Jul 15 2014  9:19AM             Jul 15 2014  9:19AM
    (1 row affected)
    Cheers
    Dan

  • How to find out the user-exits?

    hi.
    how to find out the user-exits?
    regards
    eswar.

    Hi,
    *& Report  ZEXITFINDER
    *report  zexitfinder.
    *& Enter the transaction code that you want to search through in order
    *& to find which Standard SAP User Exits exists.
    *& Tables
    tables : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    *& Variables
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    *& Selection Screen Parameters
    selection-screen begin of block a01 with frame title text-001.
    selection-screen skip.
    parameters : p_tcode like tstc-tcode obligatory.
    selection-screen skip.
    selection-screen end of block a01.
    *& Start of main program
    start-of-selection.
    Validate Transaction Code
    select single * from tstc
    where tcode eq p_tcode.
    Find Repository Objects for transaction code
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    Find SAP Modifactions
    select * from tadir
    into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    Take the user to SMOD for the Exit that was selected.
    at line-selection.
    get cursor field field1.
    check field1(4) eq 'JTAB'.
    set parameter id 'MON' field sy-lisel+1(10).
    call transaction 'SMOD' and skip first screen.
    Regards

Maybe you are looking for