How to find out the RFC in an existing BOP

Hello
Is there a way to find out what RFC is used by an existing BOP?

Okay, i found the table it's apparently stored in: /IWFND/D_BOPR
But i would still like to know if there is a "normal" way to manage them.

Similar Messages

HOw to find out the RFC destination from BW system to ISU

Hi,
Currently my requirement is to call a function module which is written in ISU (remote enabled) from BW system.
I am unable to find out the rfc destination from BW to ISU system.
In CRM we have table like smofparsfa1. Is there any table in BW which can provide me the ISU destination?
I need to compare the records stored in isu as well as in BW system.
I need to call a function module which will provide me the data from isu.
please help me in this regard.
Krishna

Hi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman.

How to find out the DPI of an existing PDF doc?

When I print a doc/web page with a pdf printer driver then I can adjust the DPI for the print.
Ok. But how does this work the other way?
When I have a pdf doc and want to find out the DPI with which it is printed ?
How can I find out this value?
Matthias

PDFs do not have a dpi. Only individual raster graphics in a pdf have a
resolution. In a single pdf there can be several different raster and
vector graphic objects.
The Acrobat application doesn't control the dpi that a printer uses to
rasterize a printed pdf file. That is done by the printer driver---most
often an OS function. The dpi uses to print a pdf has nothing to do with
the pdf specification.
Mike

How to find out the list of field exists for a particular transaction

Hi all,
Can u please help me find out the list of field exits available for a particular Tcode?
Is it similar to User exit or . . . . ?
Thanks,
C.Selvaraj
SAP-QM

Create a program and add this code to find user exit
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
    select single * from trdir where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir where pname = tstc-pgmna.
      select single * from enlfdir where funcname =
      tfdir-funcname.
      select single * from tadir where pgmid = 'R3TR'
      and object = 'FUGR'
      and obj_name eq enlfdir-area.
      move : tadir-devclass to v_devclass.
    endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',                        "#EC NOTEXT
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',                                          "#EC NOTEXT
    21 sy-vline ,
    22 'Description',                                       "#EC NOTEXT
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.                      "#EC NOTEXT
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.                      "#EC NOTEXT
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.            "#EC NOTEXT
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Rewards if useful........................
Minal

How to find out the path of already existing directory?

I need to get the exact path of 'FCO_DIR' directory. Could you please help me out with this.
Is there any table name or a quey that I can run to get this information?
Below is the code that I am using :
Code:
l_input_dir CONSTANT VARCHAR2 (30) := 'FCO_DIR';
l_input_file CONSTANT VARCHAR2 (30) := abc_ca_upd.dat';
fhandle := UTL_FILE.fopen (l_input_dir, l_input_file, 'r');
Thanks in Advanvce !!

900811 wrote:
I tried running this query in production. I am getting error message ORA-00942: table or view does not exist
Does this require DBA privileges ?As mentioned before, this should not require "DBA privileges", whatever that means, but it requires rights to query the view (think least privileges principle).
Did you try querying ALL_DIRECTORIES instead? (or USER_ equivlent)
In dev environment, I am getting the correct results.What is the output from ALL_DIRECTORIES in dev?

How to find out the destination of an "Adaptive RFC Model - DEPRECATED"

Hi All,
How to find out the destination of an "Adaptive RFC Model - DEPRECATED" of an running application
and Where is the destination created in the server .
I have got the code of the running project from NWDI .
Thanks in Advance
Regards
Piyas Kumar

Hi,
I am not sure I fully understand the question, but as per the guide
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50f7192d-2808-2d10-189b-df3fa5f71abf
Excerpt from Page 7
Caveat Confector!1
ARFC1 destinations were created using the Web Dynpro Content Administrator tool. This tool is
still available for compatibility reasons, but the destinations it creates are not used by ARFC2
models!
Instead, you should use the u201CDestinationsu201D tool found on the Configuration Management screen of
the NetWeaver Administrator.
Therefore I think if you look up the application in the WD content Admin, there you can find out what kind of JCO/RFC connections are belonging to it. You can find it on http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
Browse your application here, and then select the JCO Connections tab on the right hand side.
I hope this helps.
Best Regards,
Ervin

How to find out the batches released from ASCP

hello gurus,
Please let me know how to find out the batches which is released from the ASCP in the OLTP OPM instance, like for the Discrete in the WIP Order in the others tabe we can see that there will be a message like " Job mass loadded on......". So is there any way that we can findout whether the batch is released from the ASCP or is it manually created.
Thanx & Regards

Hi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman.

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type          : Report                                 *
*****& Title                 : Z_ABAP_TCODE_MONITOR                   *
*****& Transaction code      : ZTCODE_USAGE                           *
*****& Developer name        : Shailendra Kolakaluri                  *
*****& Deveopment start date : 26 th Dec 2011                         *
*****& Development Package   : ZDEV                                   *
*****& Transport No          : DEVK906086                                       *
*****& Program Description   : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
      fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      layout TYPE slis_layout_alv,
      variant TYPE disvariant,
      events TYPE slis_t_event WITH HEADER LINE,
      heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date   TYPE swncdatum,
user   TYPE swncuname,
mandt     TYPE swncmandt,
tcode     TYPE swnctcode,
report TYPE swncreportname,
count     TYPE swncshcnt,
END OF zusertcode.
*data   : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
      wa_usertcode TYPE swncaggusertcode,
      wa           TYPE zusertcode,
      t_ut         TYPE STANDARD TABLE OF zusertcode,
      wa_result    TYPE zusertcode,
      t_result     TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
    EXPORTING
      component     = 'TOTAL'
      ASSIGNDSYS    = 'DEV'
      periodtype    = 'M'
      periodstrt    = month
    TABLES
      usertcode     = t_usertcode
    EXCEPTIONS
      no_data_found = 1
      OTHERS        = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
    wa-user = wa_usertcode-account.
    IF wa_usertcode-entry_id+72 = 'T'.
      wa-tcode = wa_usertcode-entry_id.
      wa-report = space.
    ELSE.
      wa-tcode = space.
      wa-report = wa_usertcode-entry_id.
    ENDIF.
    COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'DATE'.
fcat-seltext_l   = 'Date'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'MANDT'.
fcat-seltext_l   = 'Client'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'USER'.
fcat-seltext_l   = 'User Name'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'TCODE'.
fcat-seltext_l   = 'Transaction Code'.
fcat-key         = 'X'.
APPEND fcat.
ENDFORM.
*&      Form SET_LAYOUT
      text
--> p1        text
<-- p2        text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM.                    " SET_LAYOUT
*&      Form GET_EVENT
      text
--> p1        text
<-- p2        text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM.                    " GET_EVENT
**&      Form GET_COMMENT
      text
--> p1        text
<-- p2        text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM.                    " GET_COMMENT
**&      Form top_of_page
      text
--> p1        text
<-- p2        text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary       = heading[]
I_LOGO                   =
I_END_OF_LIST_GRID       =
*ENDFORM.                    " top_of_page
*&      Form DISPLAY_DATA
      text
--> p1        text
<-- p2        text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-cprog
      is_layout          = layout
      it_fieldcat        = fcat[]
      i_save             = 'A'
      is_variant         = variant
      it_events          = events[]
    TABLES
      t_outtab           = t_ut
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " DISPLAY_DATA

How to find out the person who did a transport.

How to find out the person who did a transport.
There are 3 basis admins in our Org.
so is there a way of tracing out , who did what transport.
Regards,

- Goto import Overview (STMS)
- Import Queue
- Select DEV req (goto Import History)
- Edit - Display More
It will show the user who did the transport
Rgds

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

How to find out the selected line in list

Hi all,
Can any one tell me how to find out the selected event in the list

Your subject said 'selected <b>line</b> in list' and your description says 'selected <b>event</b> in the list'. Which one is it you want to know?
For line you will use the event AT LINE-SELECTION and for event you will use AT USER-COMMAND.
Please reward and close if answered, if not, please revert back to the forum with more details.
Thanks,
Srinivas

How to find out the users currently logged into ODI

Hi all,
How to find out the users currently logged into ODI Work Repository?
Thanks.

Hi,
It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
Thanks,
katukota

How to find out the tables from extract structures

Hi All,
As I know my data sources are 2lis_04_p_matnr,2lis_04_p_comp,2lis_04_p_arbpl.
How to find out the tables concerned with the fields in the extract structure.
Thanks

Pl check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
OR navigate to: help.sap.com - netweaver - bi content - supply chain - look for your application area and the extractor and you will see the source tables and fields.
Ravi Thothadri

How to find out the RFC in an existing BOP

Similar Messages

Maybe you are looking for