How to find out the server listen port

Is it possible to programmatically find out what port numbers in the web server listening on for http as well as https requests? I know this information needs to be configured in the server's config. file. But is there a way to be able to get to it from a servlet (some java class running on the server for that matter) in a vendor independent manner?
Any input/help greatly appreciated.

Thanks for the reply. Sorry I should have been clearer on this. I wanted to know if I can get that information from somewhere else (ServletCotext, ServletConfig, etc) other than the request. I have a need where I have to change the port number in case the scheme changes (http to https or vice versa) and I need to know what port number to change to. Hope this makes my question clear.

Similar Messages

How to find out which server is running on which port

hi all,
how to find out which server is running on which port, i want to know both
from front end and backend?
thanks and regards
srikanth

The best source to get all the ports you have is the Context Files.
All ports are defined in the Context Files through "AutoConfig Variable". You can get the list of those variables by referring to the following note under "What is the port pool? What if I want to give a specific value to a Server Port?"
Note: 216664.1 - FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
You can also get that list via OAM.
Referring to the installation log file should also be helpful (Unless you have changed any of the ports after the installation).

How to find out the info regarding Solaris, server hang or shutdown.

Hi
As I am handling the Solaris 9 Server remotely.
As in last week the server has stopped to respond suddenly, we have tried to ping, ssh which was not working. As ultimately we have asked the Data Centre Team to hard reboot the same, to resolve the issue.
In the same ref I would like to know how we come to know the reason, what caused to reboot the same, i.e . any log file, etc..
I have check /var/adm/messages, but not found any detail for the same.
Thanks
Rajan
I

No core files?
No hope for an answer.
As you learned in the other Internet forum.
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-out-the-info-regarding-solaris-server-hang-or-shutdown.-621500/
To get such corefiles analyzed,
you would need to use your service contract and log a support case with Sun.
They have the special software tools to do that.

How to find out the application server info

Hi, I am wondering how to find out the application server info in Java code, just like how to find out the db platform being used. Thanks

Hi,
I am not aware of any spec defined way of finding out such info. There may be vendor specific APIs or mechanisms.
But you can use environment entries in your deployment descriptors to specify the information and make use of the entries inside your j2ee component. That will make your code platform neutral.
Sahoo

How to find out the destination of an "Adaptive RFC Model - DEPRECATED"

Hi All,
How to find out the destination of an "Adaptive RFC Model - DEPRECATED" of an running application
and Where is the destination created in the server .
I have got the code of the running project from NWDI .
Thanks in Advance
Regards
Piyas Kumar

Hi,
I am not sure I fully understand the question, but as per the guide
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50f7192d-2808-2d10-189b-df3fa5f71abf
Excerpt from Page 7
Caveat Confector!1
ARFC1 destinations were created using the Web Dynpro Content Administrator tool. This tool is
still available for compatibility reasons, but the destinations it creates are not used by ARFC2
models!
Instead, you should use the u201CDestinationsu201D tool found on the Configuration Management screen of
the NetWeaver Administrator.
Therefore I think if you look up the application in the WD content Admin, there you can find out what kind of JCO/RFC connections are belonging to it. You can find it on http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
Browse your application here, and then select the JCO Connections tab on the right hand side.
I hope this helps.
Best Regards,
Ervin

How to find out the locale setting in a browser?

In my Java web project, the multi-lingual issue on the JSP pages is handled by JSTL. It works fine so far for any input messages. However, some messages come from the container. It is needed to find out the browser's country and language settings inside of the container. My question is how to find out the settings?
Thanks in advance.
v.

Hi, this I found on James' website--see http://www.rf.net/~james/perli18n.html#Q28
Q28. Can web servers automatically detect the language of the browser and display the correct localized page?
A28. Yes. HTTP/1.1 defines the details of how content negotiation works, including language content.
WWW browsers send an Accept-Language request header specifying which languages are preferred for responses. This technique works fairly well, although some versions of Netscape Navigator send an improperly formatted request parameter. Also, switching language preferences in either Navigator or IE 4 doesn't always "take" without first deleting a language hint.
Few sites do content-negotiation on language, and interestingly enough I do not know of any major portals doing this. One site that does is Sun's documentation library at SunDocs. Debian.org does a very nice job of using Apache content negotiation wih languages and also has some nice help info too on Setting the Default Language.
Apache's Content Negotiation features will select the right page to return, whether HTML or image file. Annoyingly, the match logic is very literal, so a browser request for en-us will not match a server entry of en except as a last resort. Any other exact match will win over en, even if en-us was first preference.
There are 2 ways of doing content negotiation with Apache: type or variant maps and multiviews.
Variant Maps
In httpd.conf, disable Options Multiviews if configured and add
AddType type-var var
DirectoryIndex index.var
Then create an index.var file like this:
URI: start; vary="type,language"
URI: index.html.en
Content-type: text/html
Content-language: en-GB
URI: index.html.en
Content-type: text/html
Content-language: en-US
URI: index.html.en
Content-type: text/html
Content-language: en
URI: index.html.fr
Content-type: text/html
Content-language: fr-CA
URI: index.html.fr
Content-type: text/html
Content-language: fr
URI: index.html.es
Content-type: text/html
Content-language: es
Multiviews
The multiviews technique works like this. This does add extra server load, as each content directory must be scanned for the variant document names.
index.html is localized into variant documents such as:
index.html.en (or index.en.html)
index.html.fr
index.html.es
index.html (or index.html.html as a reader has recommended) symlinked to one of the above as the last resort.
Here's an example of http.conf directives for this:
# in httpd.conf
AddLanguage en .en
AddLanguage fr .fr
AddLanguage es .es
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
LanguagePriority en es fr de pt
Options Multiviews
# end of httpd.conf fragment
Starting in Apache 1.2, you may also create documents with multiple language extensions.
O'Reilly's Apache - The Definitive Guide, Chapter 6
ApacheWeek article on Language Negotiation
Another ApacheWeek article on Language Negotiation

How to find out the file name

Hi,
In selection screen (parameter) user will give input TXT file from presentation server to upload to SAP. I need to capture the file name only but not the path and need to concatenate with date stamp and need to download error log in XLS file to presentation server.
How to find out the file name from selection screen?
I searched SCN threads but not found relavant solution.
Thanks,
R Kumar

Hi
This code gets only filename from selection screen :
REPORT x.
PARAMETERS p_file(100).
DATA : gv_full_path LIKE ibipparms-path,
       gv_full_path_string TYPE string,
       gv_filename(100),
       gv_file_ext(3).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Ask user to select file with a popup :
CALL FUNCTION 'F4_FILENAME'
    IMPORTING
      file_name = gv_full_path.
Get filename from path :
gv_full_path_string = gv_full_path.
CALL FUNCTION 'CH_SPLIT_FILENAME'
    EXPORTING
      complete_filename = gv_full_path_string
    IMPORTING
      extension         = gv_file_ext
      name              = gv_filename.
CONCATENATE gv_filename '.' gv_file_ext INTO gv_filename.
p_file = gv_filename.
I hope it helps.

How to find out the max mem can be allocatedTT for 32 bit Win ?

How to find out the maximum Permanent Data Size and Temporary Data Size that can be allocated for the Oracle Times Ten for 32 bit Windows OS.

Hi Chris,
Am I write in saying that this also depends on shared memory setting as well?
If that is the case, on a platform like window 2003 32-bit, one cannot have more than 4GB of shared memory. Windows Server 2003 includes support for a startup switch (entered in the boot.ini file) that allows the allocation of memory and memory address space. Regardless of the amount of physical memory that is installed on the system, the operating system uses a virtual address space of 4 GB. Out of that amount, by default, 2 GB is allocated to user-mode processes (for example, Oracle or TimesTen) and 2 GB is allocated to kernel-mode processes (for example the operating system and others). In a nutshell on systems that have more than 1 GB of RAM, this startup switch can be used to allocate more memory to applications (3 GB) and less memory to the operating system (1 GB). However, adding adding the /3GB switch to the boot.ini file will not increase the amount of physical RAM memory, the 3GB switch just tells the computer to allocate the existing memory space differently.
For a 32-bit TimesTen the limit on memory cannot be more than 2GB (PermSize+TempSize). For example on Linux 32-bit I have 1024MB and 512MB for these two parameters.
Thanks,
Mich

How to find out the source of an event fired by button in a table in WD?

Hi experts,
I'm new to Web Dynpro and I need to know how to find out the source of an event (IWDCustomEvent) fired by a button in a table? I need to know which one is the clicked button (on which row)?
Help will be appreciated
Regards

Hi GLM,
thanks for your reply. Yes I know about that but when a round trip to the server is made the lead selection is at the first row of the table and when i click the button on, for example, the 3rd row the getLeadSelection method returns 1 and the color marker for the current row stays on the first row. So I need to click first somewhere else on the 3rd row and then on the button in order to update the value of lead selection and it's not very nice. So if you have some other idea it would be very helpful. Or perhaps some workaround.
Regards

Does anyone have any idea how to find out the version of weblogic plugin

Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
I could not find version in plugin directory.
it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
Sun One 6.1 SP6
Weblogic 9.2
Solaris 5.10
Edited by: 985608 on 01-feb-2013 8:20
Edited by: 985608 on 04-feb-2013 6:25
Edited by: 985608 on 04-feb-2013 6:27

Hi,
You can find version of weblogic plugin using below command.
strings <plugin module file> | grep -i wlsplugins
Mark if this helps.
Regards,
Kishore

How to find out the primary and failover DNS name

Hi;
This sounds very stupid, but could some one please tell me how to find out the name/dns name of the primary and failover server without using the CDS console.
any help is appreciated

Is this what you want?
$ /usr/lib/ldap/ldap_cachemgr -g
cachemgr configuration:
server debug level 0
server log file "/var/ldap/cachemgr.log"
number of calls to ldapcachemgr 12729
cachemgr cache data statistics:
Configuration refresh information:
Previous refresh time: 2005/08/07 23:54:59
Next refresh time: 2005/08/08 00:55:00
Server information:
Previous refresh time: 2005/08/14 15:15:00
Next refresh time: 2005/08/15 03:15:00
server: ldap1.example.com, status: UP
server: ldap2.example.com, status: UP
server: ldap3.example.com, status: UP
Cache data information:
Maximum cache entries: 256
Number of cache entries: 0
Gary

How to find out sql server administrator account in sql server 2008 R2

how to find out sql server administrator account in sql server 2008 R2
adil

there is any way to find out actual administrator
because i forget that user i used to logon to server and installed sqlserver
adil
Hi adilahmed,
According to your description, you forgot the account which was used to install SQL Server. SQL Server service account information is stored in Windows Registry database. You can get this information from Services Console or SQL Server Configuration.
For example, to get account information from Services Console.
1. Go to Start > Run > Services.msc
2. Right Click on SQL Server Service, i.e. “SQL Server (InstanceName)” and go to properties
3. The account information is available under Log On tab.
Or you can get the information by using DMV and so on.
SELECT servicename, service_account FROM sys.dm_server_servicesGO
If you now log in SQL Server by using sysadmin account, you can check all login names in security and find the original account to login.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

How to find out the time when the ASE started?

Normally, ASE not reboot for production. Only for maintenance or performance tuning, maybe need to reboot ASE.
Question is how to find out the time when ASE was started?
one way maybe is check errorlog. Any more simple way no need to login to server OS?

Hi Kent,
In ASE 12.5 and up, you can do 'select @@boottime' For older releases, a general method is 'select crdate from sysdatabases where dbid=2'
1> select @@boottime, crdate from sysdatabases where dbid=2
2> go
crdate
Jul 15 2014 9:19AM Jul 15 2014 9:19AM
(1 row affected)
Cheers
Dan

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type          : Report                                 *
*****& Title                 : Z_ABAP_TCODE_MONITOR                   *
*****& Transaction code      : ZTCODE_USAGE                           *
*****& Developer name        : Shailendra Kolakaluri                  *
*****& Deveopment start date : 26 th Dec 2011                         *
*****& Development Package   : ZDEV                                   *
*****& Transport No          : DEVK906086                                       *
*****& Program Description   : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
      fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      layout TYPE slis_layout_alv,
      variant TYPE disvariant,
      events TYPE slis_t_event WITH HEADER LINE,
      heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date   TYPE swncdatum,
user   TYPE swncuname,
mandt     TYPE swncmandt,
tcode     TYPE swnctcode,
report TYPE swncreportname,
count     TYPE swncshcnt,
END OF zusertcode.
*data   : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
      wa_usertcode TYPE swncaggusertcode,
      wa           TYPE zusertcode,
      t_ut         TYPE STANDARD TABLE OF zusertcode,
      wa_result    TYPE zusertcode,
      t_result     TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
    EXPORTING
      component     = 'TOTAL'
      ASSIGNDSYS    = 'DEV'
      periodtype    = 'M'
      periodstrt    = month
    TABLES
      usertcode     = t_usertcode
    EXCEPTIONS
      no_data_found = 1
      OTHERS        = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
    wa-user = wa_usertcode-account.
    IF wa_usertcode-entry_id+72 = 'T'.
      wa-tcode = wa_usertcode-entry_id.
      wa-report = space.
    ELSE.
      wa-tcode = space.
      wa-report = wa_usertcode-entry_id.
    ENDIF.
    COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'DATE'.
fcat-seltext_l   = 'Date'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'MANDT'.
fcat-seltext_l   = 'Client'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'USER'.
fcat-seltext_l   = 'User Name'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'TCODE'.
fcat-seltext_l   = 'Transaction Code'.
fcat-key         = 'X'.
APPEND fcat.
ENDFORM.
*&      Form SET_LAYOUT
      text
--> p1        text
<-- p2        text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM.                    " SET_LAYOUT
*&      Form GET_EVENT
      text
--> p1        text
<-- p2        text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM.                    " GET_EVENT
**&      Form GET_COMMENT
      text
--> p1        text
<-- p2        text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM.                    " GET_COMMENT
**&      Form top_of_page
      text
--> p1        text
<-- p2        text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary       = heading[]
I_LOGO                   =
I_END_OF_LIST_GRID       =
*ENDFORM.                    " top_of_page
*&      Form DISPLAY_DATA
      text
--> p1        text
<-- p2        text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-cprog
      is_layout          = layout
      it_fieldcat        = fcat[]
      i_save             = 'A'
      is_variant         = variant
      it_events          = events[]
    TABLES
      t_outtab           = t_ut
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " DISPLAY_DATA

How to find out the server listen port

Similar Messages

Maybe you are looking for